• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.53-53
• /
• 2022

본 연구는 낙동강 상류에 위치한 안동댐 하류(4,565.7 km²)를 대상으로 1차원 물리적 서식처모형인 PHABSIM(Physical Habitat Simulation System)과 2차원 물리적 서식처 모형인 River2D를 이용하여 대표어종인 피라미에 대해 환경생태유량과 어류서식처 면적을 산정하였다. 두 모형의 구축을 위해 낙동강 하천기본계획보고서(2009)를 수집하여 하천단면과 수리학적 자료를 두 서식처모형에 적용하였다. 유속과 수위자료의 경우, 낙동강수문조사연보와 검보정된 HEC-RAS를 활용하여 갈수량 Q355(10.95 m³/sec)와 평수량 Q185(41.72 m³/sec)에서의 유속과 수위를 생성하여 적용하였다. 대표어종 선정을 위해 총 4회에 걸쳐 현장조사를 진행하였으며, 수집한 어종들에 대해 상대풍부도와 출현 개체수 분석결과 54.2%의 상대풍부도와 총 110개의 개체수를 나타낸 피라미(Z acco platypus)를 대표어종으로 선정하였다. 서식처 적합도 지수 HSI(Habitat Suitability Index)는 피라미 출현시기의 수심(Depth), 유속(Velocity) 그리고 하상재료(Substrate)를 조사하여 적립하였으며 수심은 0.4~0.6 m, 유속은 0.3~0.5 m/s, 하상재료는 모래(2.0 mm)~잔자갈(16.0 mm)일 때 HSI가 가장 적합한 것으로 분석되었다. PHABSIM을 이용하여 피라미에 대해 최적 환경생태유량 산정결과 20.0 m³/sec로 산정되었고, 모의한 30개 유량에 대해 평균 어류서식처 면적은31,905.3 m²/1,000m로 산정되었다. PHABSIM으로 산정된 환경생태유량과 River2D를 이용하여 하천유량이 Q355와 환경생태유량일 때의 공간분석을 실시하였다. Q355와 비교하여 환경생태유량일 때 유속과 수심 HSI에 대한 공간분포와 어류서식처 면적 또한 더 큰 것으로 분석되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.162-162
• /
• 2016

본 연구에서는 한국 낙동강에 위치한 강정-고령보에 설치된 by-pass 어도의 유인효율을 유량 변화에 따라 살펴보고, 어도 유인효율을 극대화할 수 있는 최적의 본류 방류량을 산정하였다. 강정-고령보는 고정보와 가동보로 구성된 혼합식 보로 유량조절이 가능하며, 가동보의 조작에 따라 by-pass 어도 내의 유량이 결정된다. 유인효율의 지표로 목표어종의 HSC(Habitat Suitability Criteria) 지수에 기반한 WUA(Weighted Usable Area)를 삼았다. WUA는 평면 2차원 물리서식처 모형인 River2D를 활용하여 계산하였다. 또한 River2D로 계산된 유속장은 GPS Floater를 활용한 현장관측 자료로 검증하였으며, 어망을 이용한 월별 어류 모니터링 자료로 유인효율 평가의 타당성을 간접적으로 검증하였다. 결과적으로 본 연구 대상인 강정-고령보의 by-pass 어도에서 가장 효과적으로 목표 어류를 유인하기 위해서는 본류의 유량이 190 cms내외를 유지해야 한다. 특히 목표 어류인 모래무지가 봄철(4월~6월)에 산란기를 맞아 상하류로 이동하려는 경향을 띄므로, 이때 적절한 가동보 운영을 통해 본류 유량을 190 cms로 유지하는 것이 필요하리라 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.52-59
• /
• 2005

The goal of this project is to estimate the instream flow of the Han River Basin to ensure the adequate supply of suitable quality water for preservation and enhancement of aquatic ecosystems. A applied model is Physical Habitant Simulation System(PHABSIM) of Instream Flow Incremental Methodology(IFIM). The parameters which are needed to simulation by PHABSIM such as flow depth, velocity distribution and channel cover with cross section data are obtained by field survey. The Habitat Suitability Criteria with the application of univariate curve on Zacco platypus as a target species was able to be established by conducting the field investigation. The estimated results of ecological recommended instream flow by this study has important meanings that the future river management have to seriously take into account for the natural environment and functions of river system.

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.369-376
• /
• 2020

Given the importance of quickly recovering livelihoods and economic activity after an earthquake, the seismic performance of the pile foundation is becoming more critical than before. In order to promote seismic retrofit of the pile foundations, it is necessary to develop a method for evaluating the seismic performance of the pile foundation based on the experimental data. In this paper, we focus on the building that was suffered severe damage to the pile foundation, conduct simulation analyses of the building, and report the results of evaluating the dynamic characteristics when piles are damaged using a system identification method. As a result, an analysis model that can accurately simulate the behavior of the damaged building during an earthquake was constructed, and it was shown that the system identification method could extract dynamic characteristics that may damage piles.

• Journal of Environmental Science International
• /
• v.22 no.8
• /
• pp.925-935
• /
• 2013

In this study, a comprehensive field monitoring was conducted to understand habitat conditions of fish species in up and downstream of Hoengseong Dam. Based on the monitoring data, riverine health conditions such as composition ratio of fish species, bio-diversity (dominance index, diversity, evenness and richness), index of biological integrity (IBI) and qualitative habitat evaluation index (QHEI) were assessed, and optimal ecological flowrates (OEF) were estimated using the habitat suitability indexes (HSI) established for three fish species Coreoleuciscus splendidus, Pungtungia herzi and Microphysogobio longidorsalis selected as icon species using the physical habitat simulation system (PHABSIM). The total number of species sampled was 20 species, and two species of Zacco platypus (30.4%) and C. splendidus (20.9%) dominated the fish community. As a result, it was revealed that IBI and QHEI values decreased from upstream to downstream along the river. The estimated IBI value ranged from 24 to 36 with average being 30.9 out of 50, rendering the site ecologically fair to good health conditions. HSI for C. splendidus were determined according to three different month in terms of season: Spring (April), Summer (August) and Autumn (October). HSI for flow velocity were estimated at 0.7 to 0.8 m/s for the Spring, 0.5 to 1.0 m/s for the Summer and 0.8 to 0.9 m/s for the Autumn. HSI for water depth were estimated at 0.3 to 0.5 m for the Spring; 0.3 to 0.5 m for the Summer; and 0.3 to 0.4 m for the Autumn. OEF was estimated at 4.2 and $6.5m^3/s$ for the Spring and Autumn, and $12.0m^3/s$ for the Summer. Overall, it was concluded that the Hoengseong Dam has been relatively well protected from the anthropogenic disturbance for the legally protected species including the endemic species studied in this study.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.833-843
• /
• 2020

Ecohydraulics is a newly born discipline in the early 1990s by the interdisciplinary approach combined with aquatic ecology in one discipline and geomorphology, hydrology, and fluid hydrodynamics in another. Major areas of ecohydraulics can be delineated as habitat hydraulics (including environmental flow), vegetation hydraulics, eco-corridor hydraulics, eutrophication hydraulics, and ecological restoration hydraulics. Reviews of relevant international journals and literature reveal that ecohydraulics has remained in the limited areas of fish response, hydraulic modeling, and physical habitat response. It has not reached a truly interdisciplinary stage. Literature reviews in Korea reveal that only 3% of the total number of the papers listed in the Journal of KWRA during the last 24 years is related to ecohydraulics. It is about 20% of the total listed in the Journal of Ecology and Resilient Infrastructure. Most of those related to ecohydraulics in Korea concern vegetation hydraulics, habitat hydraulics, and ecological restoration hydraulics. In contrast, dynamic flow modeling areas, including turbulence, fauna motion simulation, and eutrophication hydraulics, are not found. Areas of further research in ecohydraulics in Korea may be specified as follows: 1) environmental flows adapted to the traits of the rivers in Korea, 2) development of the dynamic floodplain vegetation models (DFVM) to assess the changes from the white river to green river, 3) development of the eutrophication hydraulic model to predict the freshwater algal blooms, and 4) development of the models to evaluate the physical, chemical, and biological impacts of the stream restoration, decommissioning and removal of old weirs or small dams.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1041-1052
• /
• 2022

This study is to estimate the optimal ecological flow and analysis the spatial distribution of fish habitat for Andong dam downstream reach (4,565.7 km²) using PHABSIM (Physical Habiat Simulation System) and River2D. To establish habitat models, the cross-section informations and hydraulic input data were collected uisng the Nakdong river basic plan report. The establishment range of PHABSIM was set up about 410.0 m from Gudam streamflow gauging station (GD) and about 6.0 km including GD for River2D. To select representative fish species and construct HSI (Habitat Suitability Index), the fish survey was performed at Pungji bridge where showed well the physical characteristics of target stream located downstream of GD. As a result of the fish survey, Zacco platypus was showed highly relative abundance resulting in selecting as the representative fish species, and HSI was constructed using physical habitat characteristics of the Zacco platypus. The optimal range of HSI was 0.3~0.5 m/s at the velocity suitability index, 0.4~0.6 m at the depth suitability index, and the substrate was sand to fine gravel. As a result of estimating the optimal ecological flow by applying HSI to PHABSIM, the optimal ecological flow for target stream was 20.0 m³/sec. As a result of analysis two-dimensional spatial analysis of fish habitat using River2D, WUA (Weighted Usable Area) was estimated 107,392.0 m²/1000 m under the ecological flow condition and it showed the fish habitat was secured throughout the target stream compared with Q₃₅₅ condition.

• International Journal of High-Rise Buildings
• /
• v.4 no.4
• /
• pp.283-290
• /
• 2015

Crack control remains a primary concern for mass concrete structures, where the majority of cracking is caused by temperature changes during the hydration process. One-time pouring is a useful construction method for mass concrete structures. The suitability of this method for constructingon of the Shanghai Tower's mass concrete foundation slab of Shanghai Tower is considered here by a numerical simulation method based on a 6- meter- thick slab. Some of the conclusions, which can be verified by monitoring results conducted during construction, are as follows. The temperature gradient is greater in the vertical direction than in the radial direction, therefore, the vertical temperature gradient should be carefully considered for the purpose of crack control. Moreover, owing to cooling conditions at the surfaces and the cement mortar content of the slab, the temperatures and temperature gradients with respect to time vary according to the position within the slab.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.287-300
• /
• 2022

Unconventional structures are getting more popular in recent days. Large-span roofs are used for many structures, such as airports, stadiums, and conventional halls. Identifying the pressure distribution and wind load acting on those structures is essential. This paper offers a collaborative study of computational fluid dynamics (CFD) simulations and wind tunnel tests for assessing wind pressure distribution for a building with a combined slender curved roof. The hybrid turbulence model, Improved Delayed Detached Eddy Simulation (IDDES), simulates the open terrain turbulent flow field. The wind-induced local pressure coefficients on complex roof structures and the turbulent flow field around the structure were thus calculated based upon open terrain wind flow simulated with the FLUENT software. Local pressure measurements were investigated in a boundary layer wind tunnel simultaneous to the simulation to determine the pressure coefficient distributions. The results predicted by CFD were found to be consistent with the wind tunnel test results. The comparative study validated that the recommended IDDES model and the vortex method associated with CFD simulation are suitable tools for structural engineers to evaluate wind effects on long-span complex roofs and plan irregular buildings during the design stage.

• International Journal of High-Rise Buildings
• /
• v.12 no.2
• /
• pp.145-152
• /
• 2023

Typical floor systems in contemporary tall buildings consist of reinforced concrete or composite metal deck over framing members and account for a majority of the structural weight of the building. The use of high-density materials, such as reinforced concrete and steel, increases the weight of floor systems, reducing the system's overall efficiency. With the introduction of high-performance materials, mainly mass timber products, and fiber-reinforced composites, in the construction industry, designers and engineers have multiple options to choose from when selecting structural materials. This paper discusses the application of mass timber and carbon fiber composites as structural materials in floor systems of tall buildings. The research focused on a comparative analysis of the structural system efficiency for five different design options for tall building floor systems. Finite Element Analysis (FEA) method was adopted to develop a simulation framework, and parametric structural models were simulated to evaluate the structural performance under specific loading conditions. Simulation results revealed the advantages of lightweight structural materials to improve system efficiency and reduce material consumption. The impact of mechanical properties of materials, loading conditions, and issues related to fire engineering and construction were briefly discussed, and future research topics were identified in conclusion.