• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.191-194
• /
• 2008

We will focus on the horizontal Bridgman growth system to analyze the transport phenomena numerically, because the simple furnace system and the confined growth environment allow for the precise understanding of the transport phenomena in solidification process. In conventional melt growth process, the dopant concentration tends to vary significantly along the crystal. In this work, we propose the modification of crucible geometry for improving the productivity of silicon single-crystal growth by controlling axial specific resistivity distribution. Numerical analysis has been performed to study the transport phenomena of dopant impurities in conventional and proposed Bridgman silicon growth using the finite element method and implicit Euler time integration. It has been demonstrated using mathematical models and by numerical analysis that proposed method is useful for obtaining crystals with superior uniformity along the growth direction at a lower cost than can be obtained by the conventional melt growth process.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.221-225
• /
• 1996

In diamond synthesis by metal film growth method under high pressure and high temperature, the nucleation and growth of diamond was observed dependent on the carbon source variation from graphite powder to the heat treated powders of lamp black carbon. At the low driving force condition near equilibrium pressure and temperature line, nucleation of diamond did not occur but growth of seed diamond appeared in the synthesis from lamp black carbon while both nucleation and growth of diamond took place in the synthesis from graphite. Growth morphology change of diamond occurred from cubo-octahedron to octahedron in the synthesis from graphite but very irregular growth of seed diamond occurred in the synthesis from lamp block carbon. Lamp black carbon transformed to recrystallized graphite first and very nucleation of diamond was observed on the recrystallized graphite surface. Growth morphology of diamond on the recrystallized graphite was clear cubo-octahedron even at higher pressure departure condition from equilibrium pressure and temperature line.

• ALGAE
• /
• v.26 no.1
• /
• pp.73-77
• /
• 2011

A dominant planktonic bloom-forming species, Mallomonas elongata was isolated from a small shallow eutrophic pond. The growth characteristics of this species on variable silicate concentrations and light intensities were investigated in laboratory unialgal cultures. In culture condition of $15^{\circ}C$, the maximum population growth and the highest growth rate of M. elongata occurred at a light intensity of $80\;{\mu}mol\;m^{-2}s^{-1}$, and in culture condition of $18^{\circ}C$, it exhibited the maximum population growth and the highest growth rates at a light intensity of $50\;{\mu}mol\;m^{-2}s^{-1}$. Silicate concentration had no effect on the population growth and growth rate of M. elongata.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2001

SiC single crystals were grown in the various condition of growth pressure and temperature in the sublimation growth. We observed the growth step morphology and the shapes on the surface of as-grown crystals using an optical microscope, and characterized the co-relations among the growth parameters by adapting the Burton, Carbera and Frank theory(BCF theory)for nucleation and crystal growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.293-300
• /
• 1996

A continuous growth method (Orr's method) were developed to grow LiNbO3 single crystals. The optimum growth condition established are as follows; When the controlled temperature of a platinum crucible were 1190℃∼1210℃, the pulling rate was 2 mm/hr, the feeding rate was 1.5∼2.5 g/hr, and the rotation speed was 20 rpm. The phase and growth orientation of the grown LiNbO3 crystals wer characterized by a X-ray diffraction method. The overflowing phenomena, which induced cracking into the grown crystal during the process, was effectively suppressed by the control of the growth parameter.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.50-57
• /
• 2004

Mercurous Bromide ($Hg_2Br_2$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. We investigate the effects of solutal convection on the crystal growth rate in a horizontal configuration for diffusive-convection conditions and purely diffusion conditions achievable in a low gravity environment. Our results show that the growth rate is decreased by a factor of one-fourth with a ten reduction of gravitational acceleration near y = 2.0 cm. For 0.1 $g_O$ the growth rate pattern exhibits relatively flat which is intimately related to diffusion-dominated processes. The growth rate nonuniformity is regardless of aspect ratio across the interfacial positions from 0 to 1.5. Also, the effect of a factor of the ten reduction in the gravitational acceleration is same to both Ar = 5 and 2. The enlargement in the molecular weight of B from 50 to 500 by a factor 4 causes a decrease in the maximum growth rate by the same factor, indicative of the effect of solutal gradients.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1722-1729
• /
• 1994

At early stage of creep-fatigue crack growth tests, initial transient behavior which implies high crack growth rate has been generally observed by some researchers. Since the influence of the initial transient crack growth behavior on the remaining life of components is significant, cause of it should be further studied. In this study, characteristics of the initial transient behavior of 1Cr-1Mo-0.25V steel is studied experimentally by performing creep-fatigue crack growth tests at $538^{\circ}C$ in air under trapezoidal waveshapes. It is verified that the cause of the initial transient behavior is not high ${(C_t)}_{avg}$ values due to the small scale creep condition at the early stage of test, but oxidation-dominated crack growth mechanism during the transient period which is different from the creep-dominated crack growth mechanism in steady crack growth period.

• Korean Journal of Ecology and Environment
• /
• v.40 no.4
• /
• pp.520-526
• /
• 2007

To select submerged macrophytes to suppress growth of Microcystis aeruginosa through releasing allelochemicals, we conducted growth experiments with water from patches of submerged macrophytes and with aqueous extracts of those submerged macrophytes. In the first experiment, growth rates of M. aeruginosa decreased as biomass of Myriophyllum spicatum and Hydrilla verticillata increased. In the second experiment, M. aeruginosa showed approximately 50% growth reduction with extracts from M. spicatum and 24% reduction with extracts from Ottelia alismoides. Both M. aeruginosa growth experiments with water and plant extracts suggest that M. spicatum would be the best candidate to reduce M. aeruginosa growth.

• Asia-Pacific Journal of Business
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2016

This study attempts to investigate the effects of different types of debts on economic growth in Bangladesh using time series data spanning from 2000 to 2015. In this study, the RDL model has been applied to determine the long run relationship among the selected variables. The result of the ARDL model shows that there exists a long term relationship between economic growth and the debt variables. It was evident from the findings that there exists bidirectional causality between public sector external debt and economic growth. Causality between private external debt and economic growth has been found to be insignificant. However, causality between domestic debt and economic growth showed a unidirectional causality from domestic debt to economic growth and not vice versa. Causality tests suggest that impact of domestic debt on economic growth is more effective compared to external debts.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.3
• /
• pp.78-89
• /
• 1989

Applicability of tearing modulus based on J-integral proposed by Paris et al is investigated using compact tension specimens of strutural alloy steel (SCM4). Both general fracture test and instability fracture test are performed. The applied tearing modulus, ( $T_{j}$)app estimated from the real load vs. crack growth curve measured from experiments are compared with that estimated from the limit load vs. crack growth curve. The results are : (1) the $T_{j}$parameter could be applied to predict crack growth instability : (2) The use of ( $T_{j}$)app estimated from the load vs. crack growth curve, proposed in this study could be well predicted crack growth instability instead of that estimated form the limit load vs. crack growth curve.e.