• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.67-77
• /
• 2002

This paper introduces the calibration results of the fatigue crack growth models for damage tolerance analysis of the aircraft structures. Generalized Willenborg model and Wheeler model are calibrated with experimental data tested under the load spectrum of a trainer. The retardation factors such as, shut-off ratio in Generalized Willenborg model and shaping exponent in Wheeler model, are evaluated for aluminum alloys AL2024-T3511, AL7050-T7451 and AL7075-T73511. It is shown that the retardation effect of the crack growth rate depends on the yield strength of material and the maximum stress in the load spectrum. Generalized Willenborg model and Wheeler model give satisfactory prediction of crack growth life but the calibration of the experimental parameters with test is required.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.1
• /
• pp.33-40
• /
• 1997

The microbial growth of fresh, vacuum packaged, cook-in-bag uncured beef patties was determined in two film structures, a commercial (PE/EVOH), and super barrier ($SiO_2$ coated polyester) material. Packaged samples were cooked to internal temperature of 71 and $82^{\circ}C$ for 30 minutes, and stored in temperature abused ($23{\pm}2^{\circ}C$) and refrigerated storage ($4-6^{\circ}C$). Barrier properties had a significant effect (p<0.001) on aerobic and mesophilic growth in the abused condition. Cooking temperatures had a statistically significant effect (p<0.05) on aerobic growth in the refrigerated condition. The growth of anaerobes and psychrophiles were not significantly effected by either variables. Storage times had the most significant effect (p<0.001) for all groups of microorganisms. The physical properties of the commercial film (strength, thickness, and shrinkage) were changed after exposure to thermal treatment, while the super barrier package had actually no change.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.277-283
• /
• 1997

The effect of nutrient concentration and plant growth regulators on rooting of Coleus stem cuttings were investigated. In contrast to sand cutting, the nutrient solution or plant growth regulator treatment increased the root numbers and root length. The concentration of nutrient solution were 1, l/2 and 1/4 strength of the balanced nutrient solution developed by Japanese Horticultural Experimental Station and the highest root growth was obtained from 1/4 strength nutrient concentration. NAA or IBA treatment in culture solution stimulated the rooting and 0.01mg/l of NAA or IBA was effective in root development. Furthermore, days for rooting were shortened and root growth were promoted by mixing nutrient solutions with plant growth regulators and by using cutting with leaves. The rooting of Coleus was observed under microscope and the adventitious root formation initiated at 3 days after cutting with nutrient and auxin mixture.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.132-137
• /
• 2016

The genus Cypripedium, known as lady's slipper orchid, has been considered to have a considerable marketability as a potted and garden plant with beautiful flowers; however, this species is becoming endangered and, in some places extinct, due to habitat destruction and illegal collections. As such, an optimized artificial propagation system is necessary for its conservation and horticultural cultivation. For the establishment of the in vitro proliferation of the endangered Cypripedium macranthos Sw., native to Korea, the effects of medium strength and sucrose concentrations on germination, protocorm formation and seedling growth were investigated through asymbiotic seed culture. The highest germination rate and protocorm formation rate were obtained with a 1/4 MS medium; higher MS medium strengths did not generate the favorable conditions required for germination and protocorm growth. The overall growth characteristics of roots and buds developed from protocorms were best in cultures of 1/4 MS medium. On this medium containing $10g{\cdot}L^{-1}$ sucrose, both the germination rate and protocorm formation rate increased significantly. The general growth properties of seedlings developed on the medium with $10g{\cdot}L^{-1}$ sucrose were best, showing the highest bud formation rate and root number. Our results demonstrate that the 1/4 MS medium, supplemented with $10g{\cdot}L^{-1}$ sucrose, could improve in vitro germination, and facilitate the growth of seedlings developed from the protocorms of C. macranthos Sw.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.603-608
• /
• 2015

Alumina powder have been expanded its application in industry and required to control its morphology such as powder size and aspect ratio of single particle. It can be synthesized by molten - salt method which is possible to obtain various shapes of ceramic particles by controlling the growth direction because each crystal face has different growth rate. In this study, various combinations of salts such as NaCl, $Na_2SO_4$, $Na_3PO_4$ and their mixture were used for control the growth of plate like alumina particle from the initial stage of synthesis because salt having different ionic strength can control the growth direction of ceramic particle under its melting condition around $800{\sim}900^{\circ}C$, and growth behavior of plate-like alumina particle with different reaction conditions such as temperature and concentration on the crystal size and shape was studied.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.231-238
• /
• 2022

To secure the mechanical strength of porous Al₂O₃ ceramics, which can be utilized for filters and catalyst supports is essential for their functionality and durability. Superior mechanical strength would be obtained by tailoring the densification and grain growth during sintering. This study deals with grain growth behavior of a freeze-casted Al₂O₃ with addition of La₂O₃. In a temperature range between 1400 and 1600℃, variations of average grain size with sintering time and temperature were observed and analyzed with G_tⁿ-G₀ⁿ = kt and with k = k₀exp(-E_a/RT). As a result, n value and activation energy (E_a) for grain growth were calculated as 3 and 489.09 kJ/mol, respectively. These commonly confirms retardation effect of the La addition during sintering of Al₂O₃ porous structure. More accurate analysis on the La effect can be followed to provide useful guidance for the selection of additives for better mechanical strength in Al₂O₃ porous structures.

• Horticultural Science & Technology
• /
• v.18 no.3
• /
• pp.334-341
• /
• 2000

To develop a nutrient solution for a closed hydroponic system in potato (Solanum tuberosum L.) 'Atlantic' and 'Superior' potatoes were grown with the nutrient solutions whose strengths were 0.25, 0.5, 1.0, and 1.5 of the concentration of the nutrient solution developed by the National Horticultural Experiment Station in Japan. The best results in potato growth and yield were obtained with 0.5 and 1.0 strength nutrient solutions, and nutrient compositions for potato were determined based on the 1.0 strength nutrient solution; $14.4me{\cdot}L^{-1}\;N,\;4.2me{\cdot}L^{-1}\;P,\;7.5me{\cdot}L^{-1}\;K,\;5.5me{\cdot}L^{-1}\;Ca$, and $3.5me{\cdot}L^{-1}\;Mg$ for stolon growth stage and $14.8me{\cdot}L^{-1}\;N,\;4.0me{\cdot}L^{-1}\;P,\;8.5me{\cdot}L^{-1}\;K,\;6.5me{\cdot}L^{-1}\;Ca$, and $3.0me{\cdot}L^{-1}\;Mg$ for tuber growth stage. To examine the suitability of the nutrient solutions developed for potato, the strengths of 1.0 (PS 1.0S), 0.75 (PS 0.75S), or 0.5 (PS 0.5S) were compared with half-strength of Japanese Horticultural Experiment Station' solution (JH 0.5S). Changes in pH, EC, and mineral concentrations in nutrient solutions depended more on solution strength and growth stage than on the type of nutrient solution. However, most elements in solution remained constant with plant age in PS 0.75S solution during stolon growth stage, and in PS 0.5S solution during tuber growth stage. The greatest growth and tuber yield was obtained in the standard strength solution (PS 1.0S), and potato solution developed in this experiment was recommended for hydroponic culture of potato in a closed system.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.13-17
• /
• 1997

The densification of $Al_2$O$_3$/15v/o ZrO$_2$ (Zirconia Toughened Alumina: ZTA) to the 99% of theoretical density was attempted by controlling the processing parameters affecting the each processing step i.e., milling, spray-drying, forming and pressureless sintering. The ZTA processed under the identical conditions showed a large variation in the green and sintered densities, and the mechanical properties. The deviation of 4-point bending strength was more than 100MPa for the ZTA with ~99% of theoretical density. Moreover, the relative green and sintered densities were deviated greatly from the average value. This low reproducibility could be caused by the variation of spray-dried granule properties. Thus, the effect of yield strength and morphology of spray-dried ZTA granule on the green and sintered densities and the mechanical properties needs to be studied in detail. The objective of this work is to fine out the optimum condition of compaction pressure and compaction method depending on the properties of spray-dried granules.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.80-86
• /
• 2002

$Al_{2}O_{3}/SiC$ nanocomposites were made by infiltrating partially sintered alumina bodies with polycarbosilane (PCS) solutions, which is a SiC polymer precursor, with pressureless sintering. The SiC content, densification, phases, strength, and microstructure were investigated with the processing parameters such as PCS solution concentration and heat treatment condition for PCS pyrolysis and sintering. The results were compared with those for pure alumina and nanocomposite samples made by the existing polymer precursor route (i.e. the PCS addition process). The SiC contents of up to 1.5 vol% were obtained by the PCS infiltration. PCS pyrolysis, followed by air heat treatment, was needed before sintering to avoid a cracking problem and to attain a densification as high as 98 % of theoretical. The nanocomposites exhibited significantly higher strength than pure alumina and those prepared by the PCS addition process despite larger grain size. Besides $\alpha-Al_{2}O_{3}/SiC$ and $\beta-SiC$ phases, mullite was present a little in the nanocomposites, which resulted from the reaction of $SiO_{2}$ in the pyrolysis product of PCS with the $Al_{2}O_{3}$ matrix during sintering. The nanocomposites had intagranular particles believed to be SiC, which is a typical feature of $Al_{2}O_{3}/SiC$ nanocomposites.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.647-654
• /
• 2005

This research Proposes a Process design of injection molded microcellular plastic gears for enhancing the fatigue strength/durability and accuracy of the gears applying thermodynamic instability to microcellular foaming process. To develop the injection molded plastic gears by way of microceliular process, it is absolutely necessary the following two process design. The first is microcellular forming process for enhancing the strength/durability of plastic gears. To be microcellular process succeeded, based on the microcellular principle, mechanical apparatus is designed where nucleation and cell growth are to be generated renewably. The second is the counter pressure process which is mainly fur improving the tooth surface roughness and the accuracy of microcellular gears. For the former process, screw, nozzle and gas equipment are newly designed, and for the latter, counter pressure by nitrogen gas is intentionally brought about into mold cavity when injecting plastic gears. Based on the proposed process design, using gear mold, experiments of injection molding show that, in internal space of plastic gears, microcellular nuclear cells less than 5 lim in diameter have been generated homogeneously via electron microscope photos.