• 한국안전학회지
• /
• 제8권1호
• /
• pp.54-58
• /
• 1993

The fatigue growth behavior of short cracks were studied various load ratios. Computer-aided unloading elastic compliance method was employed to measure the closure and the length of short cracks. In the dc/dN-$\Delta$K relationships. the decreasing behavior of the growth rate of short cracks is due to the decrease of crack opening ratio with increasing crack length. Irrespective of load ratio. the growth rate of short cracks can be well decribed in terms of the effective stress intensity factor range $\Delta$K$_{eff}$, which is calculated on the base of crack closure. dc/dN-$\Delta$K$_{eff}$ relationships of short cracks are found to coincide well with the corresponding long crack relationships. accordingly. the growth rate of short cracks can be predicted using that of long cracks.ort cracks can be predicted using that of long cracks.cks.

• Macromolecular Research
• /
• 제9권6호
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1993년도 학술대회지
• /
• pp.143-149
• /
• 1993

Ginseng root explants and calli induced from selected cell lines were cultured on modified Murashige and Skoog's media supplemented with different concentrations of organic or inorganic compounds and plant growth requlators to clarify the effects of chemical composition and plant growth regulators in the medium on the growth of ginseng calli and the production of ginseng saponin. For optimum growth of calli, the concentrations of 2, 4-D and sucrose were the range of 1 to 3 mg/${\ell}$l and 1 to $3\%,$ respectively. And it was clarified that sucrose, nitrogen, phosphate, calcium, magmesian plant growth regulators and their concentrations influcenced the relative biosynthesis of saponin in tissue cultures of Panax ginseng. The patterns of ginsenosides, pharmacologically useful component, were different among the cell lines and contents of ginsenosides were much higher in selected cell lines than in original cell line.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.61-65
• /
• 2005

The objective of this work was to investigate the nutritional requirements for the growth of Actinomyces sp. 9RCC5 isolated from the rumen of a native goat in Korea. The growth of strain 9RCC5 on the basal medium or the medium minus certain ingredients from the basal medium demonstrated that strain 9RCC5 showed absolute requirement of vitamin B complex mixture, while hemin and volatile fatty acids (VFA) were stimulatory to growth to some extent. The 9RCC5 strain grew well with casein hydrolysate as the sole added nitrogen source. However, neither a complex of 18 amino acids nor ammonium sulfate effectively replaced casein hydrolysate. Vitamins such as riboflavin and pantothenate were essential for growth, while thiamin and biotin were stimulatory. With regard to VFA, the growth was stimulated by acetic acid but inhibited by valeric acid. Relatively large quantities of $Na^+$, $K^+$ and $Ca^{2+}$ were absolutely required for growth. Supplementation of clarified rumen fluid to the basal medium in a range of 0-10% (vol/vol) resulted in an increased rate of growth as well as an increased extent of growth.

• Clinical and Experimental Pediatrics
• /
• 제57권9호
• /
• pp.379-383
• /
• 2014

Recombinant growth hormone (GH) is an effective treatment for short children who are born small for gestational age (SGA). Short children born SGA who fail to demonstrate catch-up growth by 2-4 years of age are candidates for GH treatment initiated to achieve catch-up growth to a normal height in early childhood, maintain a normal height gain throughout childhood, and achieve an adult height within the normal target range. GH treatment at a dose of $35-70{\mu}g/kg/day$ should be considered for those with very marked growth retardation, as these patients require rapid catch-up growth. Factors associated with response to GH treatment during the initial 2-3 years of therapy include age and height standard deviation scores at the start of therapy, midparental height, and GH dose. Adverse events due to GH treatment are no more common in the SGA population than in other conditions treated with GH. Early surveillance in growth clinics is strongly recommended for children born SGA who have not caught up. Although high dose of up to 0.067 mg/kg/day are relatively safe for short children with growth failure, clinicians need to remain aware of long-term mortality and morbidity after GH treatment.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.183-190
• /
• 2015

Fatigue crack growth rate tests were conducted as a function of temperature, dissolved hydrogen (DH) level, and frequency in a simulated PWR environment. Fatigue crack growth rates increased slightly with increasing temperature in air. However, the fatigue crack growth rate did not change with increasing temperature in PWR water conditions. The DH levels did not affect the measured crack growth rate under the given test conditions. At $316^{\circ}C$, oxides were observed on the fatigue crack surface, where the size of the oxide particles was about $0.2{\mu}m$ at 5 ppb. Fatigue crack growth rate increased slightly with decreasing frequency within the frequency range of 0.1 Hz and 10 Hz in PWR water conditions; however, crack growth rate increased considerably at 0.01 Hz. The decrease of the fatigue crack growth rate in PWR water condition is attributed to crack closure resulting from the formation of oxides near the crack tips at a rather fast loading frequency of 10 Hz.

• 수산해양교육연구
• /
• 제26권2호
• /
• pp.444-454
• /
• 2014

The range of optimization problem in aquaculture is very wide, resulting from the range of species, mode of operation. Quite a few studies focus marine net-cages, but studies on land based culture farm are few or no. This paper considers a allocation problem to meet production planning in land based aquaculture system. A water pool allocation model in land based aquaculture system was developed. The solution finds the value of decision variable to minimize yearly production costs that sums up the water pool usage cost and sorting cost. The model inputs were (1) the fish growth rate (2) critical standing corp (3) number of water pool (4) number of fish. The model outputs were (5) number of water pool in growing phase (6) cost of cultivation (6) optimal facility allocation(number of water pool for each growing phase). To solve the problem, an efficient heuristic algorithm based on a greedy manner is developed. Branch and bound and heuristic is evaluated through numerical examples.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.697-702
• /
• 1995

The rough growth surfaces of diamond films fabricated by the hot filament CVD were polished using thermomechanical polishing method. And then, its application to the optical windows was discussed through the measurement of transmittance in the range of infrared radiation and analysis of surfaces structure. The results were compaerd with those of the films polished with conventional mechanicla polishing. The transmittance of the mechanically polished film reached 57~66% over the whole range from 500 to 4000 cm-1. But the transmittance of the film polished with thermomechanical polishing method was reduced below 35%. This decrease in transmittance was due to both the graphitization of diamond on the polished surface and the growth of $\beta$-SiC at diamond/Si interface during polishing. The residual Fe in hte thermomechanically polished surface was confirmed by SIMS analysis. This Fe played the role of the graphitization of near surface region of the diamond film.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.218-222
• /
• 2012

FeNi alloy nanofibers have been prepared by an electrospinning process followed by air-calcination and H2 reduction to develop electromagnetic (EM) wave absorbers in the giga-hertz (GHz) frequency range. The thermal behavior and phase and morphology evolution in the synthetic processes were systematically investigated. Through the heat treatments of calcination and H2 reduction, as-spun PVP/FeNi precursor nanofiber has been stepwise transformed into nickel iron oxide and FeNi phases but the fibrous shape was maintained perfectly. The FeNi alloy nanofiber had the high aspect ratio and the average diameter of approximately 190 nm and primarily composed of FeNi nanocrystals with an average diameter of ~60 nm. The FeNi alloy nanofibers could be used for excellent EM wave absorbing materials in the GHz frequency range because the power loss of the FeNi nanofibers increased up to 20 GHz without a degradation and exhibited the superior EM wave absorption properties compared to commercial FeNi nanoparticles.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.79.2-79.2
• /
• 2012

In this work, vertically aligned metal oxide nanorods(ZnO, $TiO_2$, $WO_3$) were grown onto CuO film at the room temperature. The fabricated nanorods of 90nm~500nm diameter range and $1{\mu}m{\sim}15{\mu}m$ of length range. Growth of metal oxide nanorods only depends on thickness of CuO film in this method, and it is grown at both of room temperature and high temperature. That means, it is much faster mathod to make the vertical metal oxide nanorods than old method such as hydrothermal method.