• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1175-1187
• /
• 1997

Densification behavior and grain growth of zirconia powder compacts are investigated under high temperature. Experimental data are obtained for zirconia powder under pressureless sintering, sinter forging and hot isostatic pressing. The constitutive equations by Kwon et al. are used for diffusional creep and grain growth. The constitutive equations by McMeeking and co-workers are also included to study the effect of power-law creep. These constitutive equations are implemented into a finite element program (ABAQUS) to investigate the friction effect during sinter forging and the canning effect during hot isostatic pressing. The agreements between experimental data and finite element results are very good in pressureless sintering and hot isostatic pressing, but not as good in sinter forging.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.209-225
• /
• 1999

Detailed description of the crystal growth methods permitting one to obtain complicated shape crystals from the melt is given. The variable shaping technique provides the growth of crystals with a discrete altering cross-section configuration during crystallization. The dynamic local shaping technique enables one to grow items with a continuous alteration of the side surface profile by a preset program.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.187-192
• /
• 2005

Under development program for a complex system, the total system or major subsystems are tested to failure, system failure modes are analyzed, and design and engineering changes are made to eliminate these failure modes. If this TAAF(test-analyze-and-fix) process is continued, and modifications are made in a competent manner, then the system reliability increase. This paper presents the reliability growth theory and applies it to some subsystems during their development and initial production testing. The application of these techniques is a part of the product assurance function that plays an important role in product reliability improvement. In addition, the EN 50126 requires essentially reliability growth for RAM growth monitoring.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.135-142
• /
• 2006

Engineers are always concerned with life cycle costs for making important economic decisions through engineering action like reliability of products. Decisions during the reliability growth development of products involve trade-offs between invested costs and its returns. In order to find minimal LCC containing the reliability improvement cost, production cost, repair and replacement costs, and holding cost of spare parts for failure items we suggest in this paper relationship between development cost and sustaining cost in values of growth parameter $\beta$ of AMSAA model. This model is applied to the reliability growth program based on AMSAA model during R&D phase, the warranty activities of items and the block replacement policy for maintenance of items in avionic equipment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.417-423
• /
• 1999

Detailed description of the crystal growth methods permitting one to obtain complicated shape crystals from the melt is given. The variable shaping technique provides the growth of crystals with a discrete altering cross-section configuration during crystallization. The dynamic local shaping technique enables one to grow items with a continuous alteration of the side surface profile by a preset program.

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.285-290
• /
• 2000

The effects of dissolved oxy-gen(DO) concentration and DO control modes on cell growth in a 4L computer-controlled bioreactor system were investigated using Phellinus linteus WI-001, a producer of protein-polysaccharides having potent anticancer activi-ties. When DO was controlled at about 20%, maximum cell concentration and specific growth rate of the strain were observed to increase 36% and 64%, respectively, as compared to the experiment performed without DO control. By adopting cascade automatic control of DO ar 20% in a mixed automatic control mode using computer-con-trolled program, 19.5g/L of maximum cell concentration was obtained. These results showed that the mixed auto-matic control mode was the effective method for enhancing cell growth of the shear sensitive Phellinus linteus.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.1
• /
• pp.48-52
• /
• 2006

Naturally occurring soybean isoflavones are known to be influenced by various genetic and environmental conditions. Growth, yield, and isoflavone content were determined in four different cultivars of soybean grown under drained paddy and upland fields. Most of growth characteristics and yield components of four different soybean cultivars harvested in drained paddy field were greater than those in upland field, regardless of cultivar. By means of high performance liquid chromatography, total daidzein and genistein contents of soybean in drained paddy field were increased up to 40 and 35%, respectively, compared with those in drained paddy field. Besides isoflavone contents, the growth and yield of soybean were significantly affected by cultivar and field conditions, indicating the necessity of genetic program for soybean cultivars appropriate to drained paddy field conditions. In conclusion, converting paddy field into upland may effectively improve soybean cropping system, especially in terms of isoflavone increment under paddy field conditions.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.105-109
• /
• 2019

LED lighting is used as artificial lighting for plant growth because it has high light efficiency and can radiate light of various wavelengths. In this paper, we have developed new structure LED lighting module to improve the performance of LED lighting for plant growth and proposed a lighting control system that can be controlled wirelessly. The proposed LED lighting module was fabricated using optical lens applied to tunnel light and simulated using Relux program. Results of simulation, we confirmed that the light distribution and average illuminance of the proposed lighting were improved. LED lighting control system was developed to wirelessly control R, G, B, W LED lighting according to plant type and growing season. Therefore, it is expected to provide the optimal lighting environment for plant growth and contribute to the improvement of farm productivity and convenience.

• Korean Journal of Occupational Health Nursing
• /
• v.30 no.3
• /
• pp.132-143
• /
• 2021

Purpose: The study aimed to explore experiences of the posttraumatic growth (PTG) in firefighters with repeated exposure to traumatic events. Methods: Participants were 11 firefighters from two fire departments, who had experienced more than one critical trauma events. Data were collected through personal interviews from August to October 2020 and analyzed by Colaizzi's phenomenological methods. Results: The PTG experiences were derived into four categories: 'growth in self-perception', 'rediscovery of the meaning of life', 'deep interpersonal relationships', and 'discovery of the meaning of work'. Conclusion: These findings could be used as basic information for developing PTG program for firefighters such as logo-therapy, semantic therapy, and self-disclosure intervention using expressive writing and speaking.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.4
• /
• pp.356-362
• /
• 1994

We developed a computer controlled Czochralski puller which automated entire crystal growing processes. Crystal weighing technique was employed for an automatic diameter control. The performance of the system was evaluated by the growth of $LiNbO_3$ single crystals.