• Animal Bioscience
• /
• v.34 no.12
• /
• pp.1951-1962
• /
• 2021

Objective: This study was conducted to evaluate single cell protein (SCP), produced from Methylococcus species, as a protein source on the growth performance, carcass traits and gut health of broiler chickens. Methods: Ten iso-nitrogenous and iso-caloric diets containing 0 (Control), 2.5%, 5%, 7.5%, and 10% SCP replacing either soybean meal (T₁ to T₅) or fish meal (T₆ to T₁₀) were formulated. Each diet prepared for starter (0 to 14 days), grower (15 to 21 days), and finisher (22 to 42 days) phases was offered to four replicates of 10 chicks each (n = 400). Growth performance at different phases and carcass characteristics and intestinal morphology on 42nd day of trial were measured. Results: Body weight gain in groups fed 2.5% and 5% SCP diets were comparable to control during different phases and cumulatively, however lower (p<0.01) in 7.5% and 10% SCP diets. Feed conversion ratio was better (p<0.01) in 2.5% and 5% SCP diets. Dressing percentage, abdominal fat percentage and meat:bone ratio were not affected (p>0.05) by SCP inclusion in the diets. However, breast percentage was higher (p<0.01) in 2.5% and 5% SCP groups and thigh percentage higher in 7.5% and 10% SCP groups. Total microbial count in duodenum, jejunum and ileum were not affected (p>0.05) by SCP inclusion up to 10% in diets. Duodenal villi length and crypt depth were highest (p<0.01) in group fed 5% SCP diets and lowest in group fed 10% SCP diets. Jejunal villi length and crypt depth as well as ileal villi length were lowest (p<0.01) in group fed 10% SCP diets. Body weight gain, feed consumption, feed conversion ratio and gut health were better (p<0.01) in broilers fed fish meal based diets compared to soybean meal based diets. Conclusion: It was concluded that inclusion of SCP up to 5% replacing soybean meal in broiler diets is beneficial in improving growth rate, breast yield and gut health status.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1991

The temperature profile of Czochralski single crystal growth system was simulated considering the fluid flow and surface radiation heat transfer. View factors of surface elements were calculated for radiation heat transfer. Two phases(solid and liquid) were treated as a continuous phase by assigning artificial large viscosity to the solid phase and latent heat was accounted by iterative heat revolution method. The solidification model was applied to solid front of the pure Ga during the melting to verify the model. The whole simulation model of CZ system was applied to the growth Al single crystal.

• Journal of the Korean Ceramic Society
• /
• v.32 no.2
• /
• pp.270-278
• /
• 1995

Nd : YAl3(BO3)4 (NYAB) single crystal has been developed for green laser. In this experiment, we found K2O/3MoO3/0.5B2O3 to be a suitable flux for NYAB crystal growth, and grew NYAB crystal by TSSG method using this flux. By varying the cooling rate of solution, seed orientation, and rotation speed, the effects of these growth conditions on the crystal quality and its morphology were examined. Suitable growth conditiions were a cooling rate slower than 2.4$^{\circ}C$/day, the rotation speed of 25~30 rpm, and the <001> seed orienttion. The phases of grown crystal, coexisting and volatile materials were investigated by X-ray diffraction. In addition, the possiblity of laser action was examined by UV analysis.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.35-42
• /
• 2011

This work was conducted to investigate the effect of dietary phytase on growth performance and excreta excretion of growing-finishing pigs for 7 days. Eighty three crossbreeds (Yorkshire ${\times}$ Landrace ${\times}$ Duroc) of growing-finishing pigs were used in this work, and divided into 6 treatments. Six treatments were compared in a $2{\times}2$ factorial arrangement with 2 groups (5 replications/group, 8 head/replications) with the additive phytase and 3 groups(growing I, II and finishing phase) with growing phases. Initial weights with growing phases were $58.6{\pm}3.9$. $83.2{\pm}3.8$ and $111.4{\pm}5.4kg$, respectively. Body weight gain was high in phytase treatment (P<0.01) and low at finishing phase. Feed conversion ratio was high in no phytase treatment and at finishing phase (P<0.05). Feed and water intakes have no significant difference with phytase existence and growing phases. Feces excretion decreased with growing phase (P<0.05), and was low at phytase treatment (P<0.05). There was no significant difference on urine excretion (P>0.05). Nitrogen (N) and phosphorus (P) intake was not found significant difference with phytase and growing phases. N excretion had no significant difference on phytase existence and growing phase (P>0.05), but P excretion decreased at phytase treatment (P<0.05). N and P excretion ratio was low at phytase treatment (P<0.05). Finally, dietary phytase resulted in improvement of growth performance and reduction of excreta excretion of growing-finishing pigs.

• Proceedings of the Zoological Society Korea Conference
• /
• 1998.10b
• /
• pp.263.2-263
• /
• 1998

No Abstract, See Full Text

• Journal of the Korean institute of surface engineering
• /
• v.37 no.2
• /
• pp.80-85
• /
• 2004

Chromium-carbon (Cr-C) and chromium-carbon-phosphorus (Cr-C-P) alloy deposits using trivalent chromium sulfate baths containing potassium formate were prepared to study their current efficiency, hardness change and phase transformations behavior with heat treatment, respectively. The current efficiencies of Cr-C and Cr-C-P alloy deposits increase with increasing current density in the range of 15-35 A/dm$^2$. Carbon content of Cr-C and phosphorous of Cr-C-P layers decreases with increasing current density, whereas, the carbon content of Cr-C-P layer is almost constant with the current density. Cr-C deposit shows crystallization at $400^{\circ}C$ and has (Cr+Cr$_{ 23}$$C_{6}$) phases at $800^{\circ}C$. Cr-C-P deposit shows crystallization at $600^{\circ}C$ and has (Cr+Cr$_{23}$ $C_{6}$$+Cr_3$P) phases at $800^{\circ}C$. The hardness of Cr-C and Cr-C-P deposits after heating treatment for one hour increase up to Hv 1640 and Hv 1540 and decrease about Hv 820 and Hv 1270 with increasing annealing temperature in the range of $400～^{\circ}C$, respectively. The hardness change with annealing is due to the order of occurring of chromium crystallization, precipitation hardening effect, softening and grain growth with temperature. Less decrease of hardness of Cr-C-P deposit after annealing above $700^{\circ}C$ is related to continuous precipitation of $Cr_{23}$ $C_{6}$ and $Cr_3$P phases which retard grain growth at the temperature.

• Journal of Korea Foundry Society
• /
• v.29 no.5
• /
• pp.225-232
• /
• 2009

For comprehensive understanding of the formation behavior of $\beta-Al_5FeSi$ phase in Al-Si-Cu alloys with the existence of Fe element, microstructure characterizations were performed using combined analysis of OM, SEM-EDS, XRD. Especially, experimental and predictive works on solidification events of $\beta-Al_5FeSi$ phase as well as other phases formed together with $\beta-Al_5FeSi$ have been carried out by using DSC analysis and Java-based Materials Properties software (J. Mat. Pro.). Primary and eutectic $\beta-Al_5FeSi$ phases were able to distinguish from each other on microstructures by their morphological features. Primary $\beta-Al_5FeSi$ phase was seen to have rough surface perpendicular to growth direction, indicating free attachment of solute atoms in liquid state. On the other hand, the eutectic $\beta-Al_5FeSi$ phase was formed with plain and straight surface during eutectic reaction together with $\alpha$-Al phase. The eutectic reaction of $\beta-Al_5FeSi$ and $\alpha$-Al phases was seen to be able to separate into each formation depending on cooling rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.80-86
• /
• 2002

$Al_{2}O_{3}/SiC$ nanocomposites were made by infiltrating partially sintered alumina bodies with polycarbosilane (PCS) solutions, which is a SiC polymer precursor, with pressureless sintering. The SiC content, densification, phases, strength, and microstructure were investigated with the processing parameters such as PCS solution concentration and heat treatment condition for PCS pyrolysis and sintering. The results were compared with those for pure alumina and nanocomposite samples made by the existing polymer precursor route (i.e. the PCS addition process). The SiC contents of up to 1.5 vol% were obtained by the PCS infiltration. PCS pyrolysis, followed by air heat treatment, was needed before sintering to avoid a cracking problem and to attain a densification as high as 98 % of theoretical. The nanocomposites exhibited significantly higher strength than pure alumina and those prepared by the PCS addition process despite larger grain size. Besides $\alpha-Al_{2}O_{3}/SiC$ and $\beta-SiC$ phases, mullite was present a little in the nanocomposites, which resulted from the reaction of $SiO_{2}$ in the pyrolysis product of PCS with the $Al_{2}O_{3}$ matrix during sintering. The nanocomposites had intagranular particles believed to be SiC, which is a typical feature of $Al_{2}O_{3}/SiC$ nanocomposites.

• Progress in Superconductivity
• /
• v.13 no.2
• /
• pp.117-121
• /
• 2011

We have fabricated $FeSe_x$ superconducting thin films at much different substrate temperatures of 430 and $610^{\circ}C$ on $Al_2O_3$(0001) substrates by using a pulsed laser deposition (PLD) technique. Superconducting transitions for both films were shown around 10 K, but their transition width and growth directions of grains were different. We found that superconducting tetragonal FeSe phases and non-superconducting hexagonal FeSe phases were coexisted in the sample grown at the low temperature of $430^{\circ}C$, whereas the hexagonal FeSe phase was decreased with increasing fabrication temperatures.

• KSBB Journal
• /
• v.8 no.2
• /
• pp.178-184
• /
• 1993

Extractive fermentations with the extract of Jerusalem artichoke in an aqueous-two-phase-system of polyethyleneglycol(PEG) and dextran(Dx) were investigated to obtain the effects of composition of PEG and Dx on both fermentation ,characteristics and partition ratio of alcohol. The specific growth rate of K. Fraglis CBS 1555 increased with a decrease of concentration of PEG and Dx. It augmented along with concentration of initial sugar up to 80g/l but decreased thereafter. The specific production rate of alcohol showed a rising tendency up to 100g/lof initial sugar, whereafter represented a decreasing trend. The partition ratio of alcohol between two phases augmented according to decrease of Dx comic. and increase of PEG cone. regardless of initial sugar concentrations. The ratio, however, decreased with Increment of initial sugar concentration at constant composition of PEG and Dx. The partition coefficient of alcohol had an ascending effect to the increase of PEG cone, but it had little effect on the changes of concentrations of Dx and initial sugar. The present study suggests that the optimum composition of PEG and Dx in the aqueous-two-phase-system by extractive fermentation were around 6.5%(w/v) of PEG and 3%(w/v) of Dx in considerations of emulsion state, sedimentation and separation of two phases, alcohol partition ratio, and specific growth rate.