• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.73-78
• /
• 2011

Purpose: For periodontal tissue engineering, it is a primary requisite and a challenge to select the optimum types of cells, properties of scaffold, and growth factor combination to reconstruct a specific tissue in its natural form and with the appropriate function. Owing to fundamental disadvantages associated with using a two-dimensional substrate, several methods of seeding cells into three-dimensional scaffolds have been reported and the authors have asserted its usefulness and effectiveness. In this study, we explore the cell attachment of periodontal ligament fibroblasts on nanohydroxyapatite (n-HA) scaffold using avidin biotin binding system (ABBS). Methods: Human periodontal ligament fibroblasts were isolated from the health tooth extracted for the purpose of orthodontic procedure. HA nanoparticles were prepared and $Ca(NO_3)_2-_4H_2O$ and $(OC_2H_5)_3P$ were selected as precursors of HA sol. The final scaffold was 8 mm in diameter and 3 mm in height disk with porosity value of 81.55%. $1{\times}10^5$ periodontal ligament fibroblasts were applied to each scaffold. The cells were seeded into scaffolds by static, agitating and ABBS seeding method. Results: The number of periodontal ligament fibroblasts attached was greater for ABBS seeding method than for static or agitating method (P<0.05). No meaningful difference has been observed among seeding methods with scanning electron microscopy images. However, increased strength of cell attachment of ABBS could be deduced from the high affinity between avidin and biotin ($Kd=10^{-15}\;M$). Conclusions: The high-affinity ABBS enhances the ability of periodontal ligament fibroblasts to attach to three-dimensionally constructed n-HA scaffold.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.292-298
• /
• 1994

An environmental study was done to examine the distribution of Vibrio mimicus in aquatic environments of Kwangan and Minrak beach, Pusan, Korea. Moreover, both bacteriological characteristics and lethal effects of isolated V. mimicus were observed. Sea water samples were collected monthly from January to September, 1993, and quantitatively analyzed for V. mimicus. This organism was isolated from April(water temperature was $16.3^{\circ}C$), whereas it was not isolated when the water temperature fell below $15^{\circ}C$. V. mimicus counts were not remarkably high, however this study at least describes the distribution and occurrence of the possible highest density in aquatic environments of this region. Among the confirmed V. mimicus strains, the author chose the strongest antibiotic resistant bacterium and named it V. mimicus K-1. This strain has antibiotic resistance to colistin, erythromycin, tetracycline, and penicillin, and most isolates had a higher level of antibiotic resistance than V. mimicus ATCC 33653. The optimum growth for V. mimicus K-1 was observed at $37^{\circ}C$, pH 7.5, and $1\%$ NaCl, respectively. This organism was mostly inactivated by Ultra Violet irradiation (30W, $50^{\circ}C$) for 70 seconds and death lethality increased in proportion to treatment temperature ($D_{50}=5.7min,\;D_{60}=\;2.1min,\;and\;D_{70}=0.7min$).

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.121-129
• /
• 1992

Radio-tracer experiments on the Sr-90 absorption by rice and soybean from a sandy-loam soil of pH 6.35 treated with 5.2 and 31.2Bq Sr-90 per g-soil were carried out through pot cultivations. Sr-90 absorption rates of both crops increased till the mature stage when the rates were about 1.0%. Concentrations in their whole tops, however, decreased or changed little as they grew. Sr-90 concentrations in plant parts of both crops increased with the increase of those in soil. Soil-to-plant transfer coefficients of Sr-90 for rice and soybean at mature stages ranged, on the dry weight basis, from 0.07(unpolished seed) to 3.67(lean and from 0.86(seed) to 9.26(leaf), respectively. Only the unpolished rice seed showed a significant difference in the coefficient with 0.17 in 5.2Bq treatment and 0.07 in 31.2Bq treatment. Sr-90 retention rates of the upper 15cm soil after crop harvests were about 80% Sr-90 absorptions had no effect on the plant growth and yield of the crops.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.126-133
• /
• 2015

Ten types of farm-made brewing vinegars were collected and four high acetic acid-producing strains (CV1, CV3, CV5, and CV6) were isolated. Among them strain CV1, exhibiting highly alcohol-resistant and acetic acid-producing properties, was selected and its taxonomic properties were investigated by phenotypic (particularly chemotaxonomic) characterization and phylogenetic inference based on 16S rRNA gene sequence analysis. On SM broth agar, cells of strain CV1 were gram-stainingnegative and formed pale white colonies with smooth to rough surfaces. Strain CV1 produced acetate from ethanol and was resistant to up to 8% (v/v) ethanol in LM broth. Strain CV1 had a G+C content of 61.0 mol%, contained meso-DAP as the cell wall amino acid, and possessed Q-10 as the major ubiquinone. A comparison of 16S rRNA gene sequences showed that strain CV1 was most closely related to Gluconacetobacter saccharivorans (≥99.0% identity). In liquid media, the optimum growth conditions for acetic acid production were 30℃ and pH >3.0 and strain CV1 produced 9.3% and 8.4% acetic acids from 10% and 9% alcohol concentrations, respectively.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.512-521
• /
• 2016

A bacterial strain was isolated from a soil sample collected on Jeju Island, Korea. The strain, designated WJ-2, exhibited a high xylanase activity, whereas cellulase activity was not detected. The 16S rRNA gene sequence of WJ-2 was highly similar to type strains of the genus Streptomyces. A neighbor-joining phylogenetic tree based on 16S rRNA gene sequences showed that strain WJ-2 is phylogenetically related to Streptomyces atrovirens. Furthermore, DNA-DNA hybridization analysis confirmed that strain WJ-2 is a novel subspecies of Streptomyces atrovirens. The genomic DNA G+C content was 73.98 mol% and the major fatty acid present was anteiso-C15:0 (36.19%). The growth and xylanase production of strain WJ-2 were significantly enhanced by using soytone and xylan as nitrogen and carbon sources, respectively. Crude enzyme preparations from the culture broth of strain WJ-2 exhibited maximal total xylanase activities at pH 7.0 and $55^{\circ}C$. Thin-layer chromatography analysis revealed that the crude enzyme degrades beechwood xylan to yield xylobiose and xylotriose as the principal hydrolyzed end products.

• Korean Journal of Environmental Biology
• /
• v.36 no.1
• /
• pp.50-61
• /
• 2018

The current study aimed to review the research trends on forest liming by age, country, and research topics, and seeks to summarize the effects of forest liming on soil, vegetation and water system in forest ecosystems. The recent goals of forest liming have been changed in response to changes in the acid deposition, and related studies have been mainly carried out in Europe and North America, where there is noted a massive forest decline, which was subsequently caused by acid rain. Most forest liming studies are noted to have focused on soil responses, however, the number of studies on the responses of vegetation and water system according to a literature review on the subject were relatively small. Meanwhile, forest liming influenced whole forest ecosystems through interaction between the soil, vegetation and water system as associated with the relevant regions. The changes in soil pH, base saturation, and cation exchange capacity by forest liming were noted as different depending on the soil layer and elapsed time after liming. The responses of vegetation to forest liming were shown in above- and below-ground plant growth and plant nutrient concentration, and also were noted to have varied depending on the available regional plant species and noted specific soil conditions. The chemical properties of the water system were changed similarly to those in the soil, leading to notable changes as seen in the planktons and available fish species in the region. Finally, these results could be used to plan further studies on forest liming, which would significantly benefit regional studies to promote the preservation of the species noted for protection in the region.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.130-141
• /
• 2017

We evaluated the field application feasibility that biologically derived substances (Naphthoquinone derivate: NQ 2-0) can be used for the eco-friendly mitigation of natural harmful cyanobacterial blooms in freshwater. We conducted a 30 ton scale mesocosm experiment to investigate the effects of NQ 2-0 on biotic and abiotic factors in water collected from Gi-heung reservoir. In the mesocosm experiments, the abundance of Microcystis sp. was continuously increased in the control. However, the Microcystis sp. cell density was sharply decreased on the $10^{th}$ day. In the treatment, NQ 2-0 showed the strong and selective algicidal activity toward the target cyanobacteria (Microcystis sp.). Accordingly, the algicidal activity of NQ 2-0 compound increased gradually until $10^{th}$, $15^{th}$ days and algal biomass was decreased to 99.4 and 100 %, respectively. NQ 2-0 compound was not only selective algicidal activity but also the growth of other phytoplankton and increased the Shannon-Wiener diversity index of phytoplankton. In the mesocosm experiments, the dynamics of biotic (bacteria, heterotrophic nanoflagellate, ciliates, zooplankton) and abiotic (water temperature, dissolved oxygen, pH, conductivity, nutrients) factors remained unaffected. These results suggest that NQ 2-0 could be a selective and ecologically safe algicide to mitigate harmful cyanobacterial blooms. In addition, it is believed that NQ 2-0 will play a major role in forming a healthy aquatic ecosystem by facilitating habitat and food supply of aquatic organisms.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.106-112
• /
• 2007

Ammonia oxidizing bacteria(AOB) oxidize ammonia to nitrite and are important microorganisms which control nitrification. Several environmental factors such as dissolved oxygen(DO), temperature and pH influence the growth of AOB. In this work, to assess the effect of DO concentration on AOB, four aerobic biofilm reactors packed with ceramic media were operated 1, 3, 5 and 7 mgDO/L, respectively. The optimal DO concentration with stable nitrification efficiency in aerobic biofilm reactor was above 5.0 mg/L. To assess the relationship between the DO concentration and the characteristics of AOB in aerobic biofiim reactor, DGGE and cloning based on PCR targeting 16S rRNA and amoA gene were performed. Additionally, INT-DHA activity test was proceeded to estimate the activity of AOB. As the results of DGCE and cloning, the community of AOB and the ratio of Nitrosomonas sp. changed little in spite of different nitrification efficiencies. INT-DHA activity test showed that the activity of AOB decreased as DO concentration decreased. It means that DO concentration does not affect the community of AOB, but the activity of AOB.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.514-522
• /
• 2020

To understand the ecotoxicological differences between representative Skeletonema sp. and Dunaliella tertiolecta, both producers as international standard test species for marine ecotoxicity testing, we compared each standard test method, and comparatively analyzed the suitability of the species for environmental assessment and their sensitivity to various test substances. Although most of the test conditions were the same in each method, there were differences in limitation of pH changing and the initial inoculation density in the validation criteria, which is supposed to originate from the low growth rate of D. tertiolecta. In terms of suitability, both species showed consistency in test performance by repeatedly meeting the validation criteria required by the standard test methods. The salinity ranges available for testing were 20 and 10 psu for Skeletonema sp. and D. tertioelecta, respectively. Finally, regarding sensitivity, the toxicity sensitivity of Skeletonema sp. was relatively higher than that of D. tertiolecta for the reference toxicant, actual polluted water discharged (ballast water), and other chemicals. This implies that using at least two species of microalgae from different classification groups could help increase the reliability and objectivity of test results in the performance of marine ecotoxicity tests using producers.

• Microbiology and Biotechnology Letters
• /
• v.35 no.4
• /
• pp.261-271
• /
• 2007

Phytoremediation is an economic and environmentally friendly technique to remediate contaminated-soil. In this study, the effects of plants, rhizobacteria and physicochemical factors on phytoremediation have been reviewed. For successful phytoremediation, the selection of plants is primarily important. To remediate soil contaminated with petroleum hydrocarbon, raygrass (Lolium multiflorum lam), white mustard, vetch (Vicia villosa), tall fescue (Festuca arundinacea), legumes, poplar, and Pine (Pinus densiflora) were mainly applied, and the removal efficiency of petroleum hydrocarbon were ranged 68 to 99%. Corn (Zea mays), raygrass (Lolium multiflorum lam), vetch (Vicia villosa), mustard, clover (Trifolium repens), and tall fescue (Festuca arundinacea) were used for the removal of polycyclic aromatic hydrocarbon, and their removal efficiencies were 50-98%. Rhizobacteria play significant roles for phytoremediation because they can directly participate in the degradation of contaminant as well as promoting plants growth. The following rhizobacteria were preferred for phytoremediation: Azospirillum lipoferum, Enterobactor cloacae, Azospirillum brasilense, Pseudomonas putida, Burkholderia xenovorans, Comamonas testosterone, Pseudomonas gladioli, Azotobacter chroococcum, Bacillus megaterium, and Bacillus subtilis. Pysicochemical factors such as pH, temperature, nutrient, electron acceptor, water content, organic content, type of contaminants are consequential limiting factors for phytoremediation.