• 원예과학기술지
• /
• 제19권4호
• /
• pp.585-590
• /
• 2001

본 연구는 강원도 평창의 고랭지에서 1998년 5월부터 10월까지 백합의 생육 향상과 우량구근 생산을 위해 여러 가지 피복재를 재배에 이용하였다. 피복처리재는 톱밥, 흑색필름, 반사필름, 투명필름, 그리고 백흑이중필름을 사용하였다. 백합 공시 품종은 일본 수출에 유리한 'Casablanca'와 'Marco Polo'를 재식하였다. 흑색필름과 백흑이중필름 피복재배는 백합 잎의 생장과 발육을 지연시켰다. 피복재배는 'Casablanca' 품종의 지상부 생체중을 증가시켰다. 구근생장은 흑색필름과 백흑이중필름 피복구를 제외한 처리구는 무처리구와 유사한 구근 생육상을 보여주었다. 톱밥과 반사필름 피복재배가 무처리구와 다른 피복처리구보다 백합 지상부 생육, 지하부 생육, 그리고 구근생육에 유리하였다. 흑색필름은 지상부와 지하부 생육, 그리고 개화 향상에 적합하지 않은 것으로 조사되었다. 투명필름처리와 백흑이중필름은 백합재배 시 무처리구와 비교하여 지상부생육과 구근 생산에 뚜렷한 증진 효과가 없었다. 한편 피복재가 대체적으로 생육을 지연시키는 효과가 있어 관행수확기보다 수확기를 다소 늦추는 것이 백합 구근생산에 유리할 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.380.2-380.2
• /
• 2014

Direct synthesis of graphene using a chemical vapor deposition (CVD) has been considered a facile way to produce large-area and uniform graphene film, which is an accessible method from an application standpoint. Hence, their fundamental understanding is highly required. Unfortunately, the CVD growth mechanism of graphene on Cu remains elusive and controversial. Here, we present the effect of graphene growth parameters on the number of graphene layers were systematically studied and growth mechanism on copper substrate was proposed. Parameters that could affect the thickness of graphene growth include the pressure in the system, gas flow rate, growth pressure, growth temperature, and cooling rate. We hypothesis that the partial pressure of both the carbon sources and hydrogen gas in the growth process, which is set by the total pressure and the mole fraction of the feedstock, could be the factor that controls the thickness of the graphene. The graphene on Cu was grown by the diffusion and precipitation mode not by the surface adsorption mode, because similar results were observed in graphene/Ni system. The carbon-diffused Cu layer was also observed after graphene growth under high CH4 pressure. Our findings may facilitate both the large-area synthesis of well-controlled graphene features and wide range of applications of graphene.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.95-101
• /
• 2002

The propagation rate(da/dt) prediction parameter and the microstructure properties of creep crack in domestic 3.3NiCrMov steel were investigated at 550$\^{C}$ by using 0.5" CT specimen under constant load(4090N) and constant Ct(300∼4000N/mhr) condition that was maintained during crack growth of 1mm distance. C＊ usually increased with crack length though load was reduced in order to maintain constant Ct value as crack growth and considerably showed the scatter band, but Ct depended on load line displacement rate and represented a good relation with da/dt. At constant toad and Ct region, crack growth slope was 0.900 and 0.844 each, in the other hand C＊ slope was 0.480. Fully coalesced area(FCA) ahead of crack tip was increased as Ct value increase to the critical value, and after that value FCA decreased. The average diameter ditribution of cavity in FCA showed the greatest value about 1.5 ㎛ when Ct=2000N/mhr. The increasing of Ct in FCA view point enlarged the size of damage area and the size reached to maximum 800 ㎛ when Ct=2000N/mhr.

• Plant Resources
• /
• 제5권2호
• /
• pp.165-168
• /
• 2002

This study was carried out obtain basic information for growth characteristics by different age of Dendropanax morbifera in chonnam, such as Yosu, Sunchon, Haenam, Gangjin, Wando. The pH of soil in cultivation area was 5.2 to 5.6 and organic matter was very high up to 10.6% . P205 content of soil in cultivation area was 35.3 to 42.1 mg/L, C.E.S was 13.9 to 14.4 me/100g, and moisture rate was 19.2 to 21.1 % . The flowering of Dendropanax morbifera began from 6~7 years old tree. The flowering date was at 10th of July at Wando. The growth characteristics of 12 years old tree was 929.5cm in stem height, 134.1mm in stem diameter, and 15 years old tree was 1,117.9cm in stem height, 160.8mm in stem diameter. The number of leaf was 13.9 at five years old tree, and the petioles length was 12.6 at five years old tree. Xylem sap can be had at more than 10 years old tree with good growth more than 10 em stem diameter.

• Journal of Ecology and Environment
• /
• 제31권4호
• /
• pp.327-331
• /
• 2008

Serpentine soils are distributed in a small area in Korea, and generally exhibit high contents of Ni, Cr, Fe, Mn, Co and Mg. We investigated the growth of woody plants and herbs in the Andong serpentine area, Korea. Pinus densiflora and P. rigida growing on serpentine soils have high contents of Fe, Mg, Ni and Co, with contents approximately twice as high as those of non-serpentine plants. Tree species on serpentine soil also had lower ratios of tree height/DBH than trees in a control area. In greenhouse culture experiments on two bodenvag herb species, Setaria viridis and Cymbopogon tortilis, the biomass of the plants was significantly affected by soil type but not by seed origins. After 66 days, the growth of S. viridis and C. tortilis seedlings was significantly inhibited in serpentine soil, and the dry weight of each species showed significant negative correlations with soil heavy metal contents (Ni, Co and Cr). These results suggest that the growth of plants was inhibited by properties of the serpentine soil, and in particular, their high heavy metal concentration, which induced dwarfing in woody plants and reduction of total plant biomass in herbs.

• Journal of Plant Biology
• /
• 제14권3호
• /
• pp.21-28
• /
• 1971

Dry matter production, leaf area growth and total nitrogen changes were studied in Glycine max. soybean communities, which were grown in sandy loam soils controlled to provide various moisture levels, i.e., 5-7%(level 1), 8-10%(level 2), 11-13%(level 3), 14-15%(lev디 4), 17-20%(level 5) and 22-24%(level 6). A summary of the results is shown. The maximum dry matter production of leaves, stems and nodules and the maximum leaf area per unit area were at level 5, but the maximum of root dry matter production was at level 4. Total nitrogen content of the soybean plant decreased with growth, but each level of soil moisture content also showed a little difference. Water content of the plant decreased with plant age and soil water deficiency, especially in roots and nodules. Nodule formation increased in proportion to soil moisture content. total nitrogen content of the soil on which the soybeans grew, increased from 0.23% before sowing to 0.30% at 100 days after sowing. It seems that soil water content acts as a linear factor in the elongation or dry weight increase of shoots and roots until increasing to level 5. Considering the pattern of plant growth through analysis of the shoot and root dry weight ratio, or the photosynthetic organ and non-photosynthetic organ dry weight ratio, the asymptote of plant growth at a high soil water content exceeded that at a low soil water content.

• 디지털융복합연구
• /
• 제8권2호
• /
• pp.115-129
• /
• 2010

본 연구의 목적은 광주지역 중소기업의 녹색성장에 대한 인력양성수립계획을 검토하고자하였다. 최근 녹색성장산업이라는 패러다임의 변화에 따라 중소기업들의 제반 위기를 극복하고 구조적 문제를 해결하기 위한 이에 맞는 녹색전환정책이 필요하게 되었다. 본 연구의 결과 광주지역 중소기업은 산업분류와 규모의 네트워크를 재설정할 필요성이 제기되었다. 또한, 현 산업과 접목된 녹색융합산업을 활성화시킬 필요가 있으며 이에 따라 장 단기적이고 맞춤식 인력양성정책 등 후속적 정책이 뒤 따라야 할 것이다.

• 반도체디스플레이기술학회지
• /
• 제10권3호
• /
• pp.29-33
• /
• 2011

Film growth rate and composition variation are numerically analyzed during the selective area growth of InGaN on the GaN triangular stripe microfacet in this study. Both the vapor phase diffusion and the surface diffusion are considered to determine the In composition on the InGaN surface. To obtain the In composition on the surface, flux of In atoms due to the surface diffusion is added to the concentration determined from the Laplace equation which is governing the gas phase diffusion. The solution model is validated by comparing the growth rates from the analyses to the experimental results of GaN and InN films. The In composition and resulting wave length are increased when the surface diffusion is considered. The In content is also increased according to the increasing mask width. The effect of mask width to the In content and wave length is increasing in the case of a small open region.

• Plant Resources
• /
• 제3권2호
• /
• pp.148-151
• /
• 2000

This study was carried out obtain basic information for growth characteristics by different age of Dendropanax morbifera in southern part of Korea, such as at Sunchon, Haenam, Gangjin, Wando. The pH of soil in cultivation area was 5.2 to 5.6 and organic matter was very high up to 10.6%. P$_{2}$O$_{5}$, content of soil in cultivation area was 35.3 to 42.1 mg/1, C.E.S was 13.9 to 14.4 me/100g, and moisture rate was 19.2 to 21.1 %. The flowering of Dendropanax morbifera began from 6~7 years old tree. The flowering date was at 10th of July at Wando. The growth characteristics of 12 years old tree was 929.5cm in stem height, 134.1mm in stem diameter, and 15 years old tree was 1,117.9cm in stem height, 160.8mm in stem diameter. The number of leaf was 13.9 at five years old tree, and the petioles length was 12.6 at five years old tree. Xylem sap can be had at more than 10 years old tree with good growth more than 10 cm stem diameter.r.