• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1062-1068
• /
• 2009

Urban construction has numerous difficulties due to ground weakness and various complaints from third party, so it is not economically efficient and constructability is not favorable. Therefore, underground, which has good ground conditions, was used for construction field and facilities such as stations, and they are scaled up to enhance accommodation of facility limitation and function of stations. Large section tunnel station construction has numerous risk factors such as work boundary of excavation equipment, a relaxation of stress concentration, a safety plan of tunnel stability, and so on. Therefore, by using large section tunnel station stability analysis considering construction step, we expect to analyze the latent problem during construction, and to stabilize a future project plan of a large section structure design by using an auxiliary method and a support design.

• 한국통신학회논문지
• /
• 제35권12B호
• /
• pp.1175-1182
• /
• 2010

본 논문에서는 항공기와 지상국 사이의 방위정보와 거리를 측정하는 전술항공운행 장비인 TACAN(tactical air navigation)을 위한 디지털 회로를 FPGA로 구현하였다. TACAN의 신호처리를 위한 모든 기능을 하나의 FPGA에 집적하여 구현하였다. 제안한 하드웨어는 입력 인터페이스, 레지스터 파일, 디코더, 신호 발생기, 그리고 주 제어기로 구성된다. 구현한 하드웨어는 TACAN이 요구하는 방위정보를 위한 펄스쌍 그룹을 생성하는 기능과 거리를 측정하기 위한 항공기 응답 기능을 모두 포함하고 있고, 그 밖에 지상국의 ID를 제공하는 기능 등을 모두 포함하였다. 제안한 하드웨어는 ALTERA의 FPGA를 이용하여 구현하였고, 7,071개의 logic element를 사용한다.

• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.609-614
• /
• 2009

과학기술위성 3호의 TT&C 통신 서브시스템은 위성의 텔레메트리(Telemetry) 신호를 지상국에 송신하고 지상국으로부터의 명령(Command) 신호를 수신하기 위한 통신 경로로 구성된다. 지상국으로부터의 명령신호를 수신하기 위해 S 대역 수신기가 사용되며, 현재 기술인증모델을 설계 및 제작하였다. 설계된 S 대역 수신기는 구조를 간단하게 하기 위해 주파수 하향변환 방식으로 Single Conversion 방식을 사용하였으며, DC-DC Converter과 EMI Filter을 포함한다. 또한 디지털 복조부를 FPGA를 이용하여 구현하였으며, 데이터 인터페이스로 RS-422을 사용하였다. S 대역 수신기는 기능시험과 환경시험을 수행한 결과 과학기술위성 3호의 요구조건을 모두 만족하는 것으로 나타났다.

• Journal of Astronomy and Space Sciences
• /
• 제33권4호
• /
• pp.335-344
• /
• 2016

Scientific CubeSat with Instruments for Global Magnetic Fields and Radiations (SIGMA) is a 3-U size CubeSat that will be operated in low earth orbit (LEO). The SIGMA communication system uses a very high frequency (VHF) band for uplink and an ultra high frequency (UHF) band for downlink. Both frequencies belong to an amateur band. The ground station that communicates with SIGMA is located at Kyung Hee Astronomical Observatory (KHAO). For reliable communication, we carried out a laboratory (LAB) test and far-field tests between the CubeSat and a ground station. In the field test, we considered test parameters such as attenuation, antenna deployment, CubeSat body attitude, and Doppler frequency shift in transmitting commands and receiving data. In this paper, we present a communication performance test of SIGMA, a link budget analysis, and a field test process. We also compare the link budget with the field test results of transmitting commands and receiving data.

• 한국지진공학회논문집
• /
• 제18권1호
• /
• pp.29-36
• /
• 2014

In industrial facilities sites, the conventional method determining the earthquake magnitude (M) using earthquake ground-motion records is generally not applicable due to the poor quality of data. Therefore, a new methodology is proposed for determining the earthquake magnitude in real-time based on the amplitude measures of the ground-motion acceleration mostly from S-wave packets with the higher signal-to-ratios, given the Vs30 of the site. The amplitude measures include the bracketed cumulative parameters and peak ground acceleration (As). The cumulative parameter is either CAV (Cumulative Absolute Velocity) with 100 SPS (sampling per second) or BSPGA (Bracketed Summation of the PGAs) with 1 SPS. The arithmetic equations to determine the earthquake magnitude are derived from the CAV(BSPGA)-As-M relations. For the application to broad ranges of earthquake magnitude and distance, the multiple relations of CAV(BSPGA)-As-M are derived based on worldwide earthquake records and successfully used to determine the earthquake magnitude with a standard deviation of ${\pm}0.6M$.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.804-809
• /
• 2002

Remote sensing division of satellite technology research center (SaTReC), Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. Developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies related to the ground receiving system fur high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development, the system has been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialised system for KOMPSAT-1. Currently the system is under customisation for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1948_1949
• /
• 2009

All the power generating station require dc auxiliary power systems to operate those dc components that must be available if a loss of ac power occur. Some examples of such components are auxiliary motors, circuit breakers, relays and solenoids. The dc source may be one common battery for both power and control or two separate batteries; one for power and another for control. Typically, a dc auxiliary power system is designed as an ungrounded system, instead of grounded system, so that a low-resistance ground fault on one of its two polarities will not affect the operation of the system, thus increasing system reliability and continuity of service. A ground detector should provide a high polarity-to-ground resistance so that a single ground fault occurring on the system will not affect the operation of that system. Sensitive relays have been known to energize momentarily while the cable and capacitive charge to ground shifts[1]. A power station had experienced this kind of incident and performed root cause analysis based on PC based simulation program known as PSpice. This simulation showed adapted relays on the system energize momentarily and design criteria on this relay should be corrected.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.228-228
• /
• 2002

The DLS(Data Link System) is located in the PDTS(Payload Data Transmission Subsystem) of KOMPSAT-II, and its main function is to provide communication link with Ground Segment as a space segment. DLS receive the data of MSC, OBC from DCSU(Data Compression Storage Unit) and transmit to the Ground Station by X-Band RF link. DLS is consist of CCU(Channel Coding Unit), QTX(QPSK Transmitter, ASU(Antenna Switch Unit) CCU makes a packet for communication after several kind of data processing such like Ciphering, RS Coding. QTX transmit PDTS data by OQPSK. Modulation. ASU is the unit for reliability of antenna switching. So, DLS's function is consists of ciphering, RS coding, CCSDS packetizing, randomizing, modulation and switching to antenna. These DLS's functions are controlled by PMU(Payload Management Unit). All commands to DLS are sent by PMU and all telemetries of DLS are sent to the PMU. The PMU receives commands from OBC and sends telemetries to the OBC. The OBC communicates with Ground Station by S-Band RF link. This paper presents the on-orbit DLS operation concept through the ground segment.

• 대한원격탐사학회지
• /
• 제19권3호
• /
• pp.191-200
• /
• 2003

Remote sensing division of satellite technology research center (SaTReC) , Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. The developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies for the ground receiving system for high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development from Dec. 1998 until Aug. 2002, the system had been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialized system for KOMPSAT-1. Currently the system is under customization for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• 한국위성정보통신학회논문지
• /
• 제1권2호
• /
• pp.25-31
• /
• 2006

기상, 해양 및, Ka-대역 통신 탑재체를 탑재하고 정지궤도에서 기상 및 해양 감시 임무 및 통신 서비스를 수행하는 통신해양기상위성은 기상 및 해양 탑재체에서 관측된 원시 데이터의 지상국 전송 및 지상국에서 처리된 기상 데이터의 최종 사용자국에게 중계 전송을 기상해양데이터통신 서브시스템이 있다. 기상해양데이터통신 서브시스템은 기상 및 해양 탑재체에서 수집된 원시 데이터를 받아 CCSDS 권고안에 준하여 포맷하고 증폭기를 거쳐 지상국에 전송하는 SD 채널과 지상국에서 처리된 기상 데이터를 CGMS 권고안에 따라 LRIT/HRIT 포맷팅된 신호를 최종 사용자국에 중계하는 기능을 제공하는 MPDR 채널로 구성된다. 본 논문은 관측 데이터 전송 및 중계를 위해 구성된 기상 해양데이터통신 서브시스템을 구성하고 서브시스템 예비 성능 해석을 통해 주요 요구 성능 파라미터의 만족 여부를 확인하는데 있다.