• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.43-50
• /
• 2011

The only practical way to measure wind resource at high-altitude over 100 m above ground for a feasibility study on a high-rise building integrated wind turbine might be ground-based remote sensing. The remote-sensing campaign was performed at a 145 m-building roof in Jamsil where is a center of metropolitan city Seoul. The campaign aimed uncertainty assessment of Leosphere WindCube LIDAR and Scintec MPAS SODAR through a mutual comparison. Compared with LIDAR, the data availability of SODAR was about 2/3 at 550 m altitude while both showed over 90% under 400 m, and it is shown that the data availability decrease may bring a distortion of statistical analysis. The wind speed measurement of SODAR was fitted to a slope of 0.92 and $R^2$ of 0.90 to the LIDAR measurement. The relative standard deviation of wind speed difference and standard deviation of wind direction difference were evaluated to be 30% and 20 degrees, respectively over the whole measurement heights.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1803-1818
• /
• 2021

As the frequency of drought increases due to climate change, it is very important to have a monitoring system that can accurately determine the situation of widespread drought. However, while ground-based meteorological data has limitations in identifying all the complex droughts in Korea, satellite remote sensing data can be effectively used to identify the spatial characteristics of drought in a wide range of regions and to detect drought. This study attempted to analyze the possibility of using remote sensing data for drought identification in South Korea. In order to monitor various aspects of drought, remote sensing and ground observation data of precipitation and potential evapotranspiration, which are major variables affecting drought, were collected. The evaluation of the applicability of remote sensing data was conducted focusing on the comparison with the observation data. First, to evaluate the applicability and accuracy of remote sensing data, the correlations with observation data were analyzed, and drought indices of various aspects were calculated using precipitation and potential evapotranspiration for meteorological drought monitoring. Then, to evaluate the drought monitoring ability of remote sensing data, the drought reproducibility of the past was confirmed using the drought index. Finally, a high-resolution drought map using remote sensing data was prepared to evaluate the possibility of using remote sensing data for actual drought in South Korea. Through the application of remote sensing data, it was judged that it would be possible to identify and understand various drought conditions occurring in all regions of South Korea, including unmeasured watersheds in the future.

• Agricultural and Biosystems Engineering
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2005

Assessing health condition of crop in the field is one of core operation in precision fanning. A sensing system was proposed to remotely detect the crop health condition in terms of SP AD readings directly related to chlorophyll contents of crop using a multispectral camera equipped on ground-based platform. Since the image taken by a camera was sensitive to changes in ambient light intensity, it was needed to convert gray scale image data into reflectance, an index to indicate the reflection characteristics of target crop. A reference reflectance panel consisting of four pieces of sub-panels with different reflectance was developed for a dynamic calibration, by which a calibration equation was updated for every crop image captured by the camera. The system performance was evaluated in a field by investigating the relationship between com canopy reflectance and SP AD values. The validation tests revealed that the com canopy reflectance induced from Green band in the multispectral camera had the most significant correlation with SPAD values $(r^2=0.75)$ and NIR band could be used to filter out unwanted non-crop features such as soil background and empty space in a crop canopy. This research confirmed that it was technically feasible to develop a ground-based remote sensing system for assessing crop health condition.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.804-809
• /
• 2002

Remote sensing division of satellite technology research center (SaTReC), Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. Developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies related to the ground receiving system fur high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development, the system has been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialised system for KOMPSAT-1. Currently the system is under customisation for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.606-608
• /
• 2003

This paper investigates the accuracy of three-dimensional positioning for EROS A stereo pairs when different numbers of ground control points are employed. The major works of the proposed schemes include: (1) initialization of orientation parameters (2) preliminary orbit fitting, (3) orbit refinement using the least squares filtering technique, and (4) space intersection. The experiment includes validation of positioning accuracy for an EROS A in-track stereo pair when different number of check points are employed.

• Journal of Information Processing Systems
• /
• v.16 no.4
• /
• pp.795-808
• /
• 2020

Due to the poor evaluation indexes such as detection accuracy and recall rate when Yolov3 network detects aircraft in remote sensing images, in this paper, we propose a remote sensing image aircraft detection method based on machine vision. In order to improve the target detection effect, the Inception module was introduced into the Yolov3 network structure, and then the data set was cluster analyzed using the k-means algorithm. In order to obtain the best aircraft detection model, on the basis of our proposed method, we adjusted the network parameters in the pre-training model and improved the resolution of the input image. Finally, our method adopted multi-scale training model. In this paper, we used remote sensing aircraft dataset of RSOD-Dataset to do experiments, and finally proved that our method improved some evaluation indicators. The experiment of this paper proves that our method also has good detection and recognition ability in other ground objects.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.2
• /
• pp.92-103
• /
• 2003

Research and technological advances in the field of remote sensing have greatly enhanced the ability to detect and quantify physical and biological stresses that affect the productivity of agricultural crops. Reflectance in specific visible and near-infrared regions of the electromagnetic spectrum have proved useful in detection of nutrient deficiencies. Especially crop canopy sensors as a ground remote sensing measure the amount of light reflected from nearby surfaces such as leaf tissue or soil and is in contrast to aircraft or satellite platforms that generate photographs or various types of digital images. Multi-spectral vegetation indices derived from crop canopy reflectance in relatively wide wave band can be used to monitor the growth response of plants in relation to environmental factors. The normalized difference vegetation index (NDVI), where NDVI = (NIR-Red)/(NIR+Red), was originally proposed as a means of estimating green biomass. The basis of this relationship is the strong absorption (low reflectance) of red light by chlorophyll and low absorption (high reflectance and transmittance) in the near infrared (NIR) by green leaves. Thereafter many researchers have proposed the other indices for assessing crop vegetation due to confounding soil background effects in the measurement. The green normalized difference vegetation index (GNDVI), where the green band is substituted for the red band in the NDVI equation, was proved to be more useful for assessing canopy variation in green crop biomass related to nitrogen fertility in soils. Consequently ground remote sensing as a non destructive real-time assessment of nitrogen status in plant was thought to be useful tool for site specific crop nitrogen management providing both spatial and temporal information.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.100-113
• /
• 2005

Leaf color and plant vigor are key indicators of crop health. These visual plant attributes are frequently used by greenhouse managers, producers, and consultants to make water, nutrient, and disease management decisions. Remote sensing techniques can quickly quantify soil and plant attributes, but it requires humans to translate such data into meaningful information. Over time, scientists have used reflectance data from individual wavebands to develop a series of indices that attempt to quantify things like soil organic matter content, leaf chlorophyll concentration, leaf area index, vegetative cover, amount of living biomass, and grain yield. The recent introduction of active sensors that function independent of natural light has greatly expanded the capabilities of scientists and managers to obtain useful information. Characteristics and limitations of active sensors need to be understood to optimize their use for making improved management decisions. Pot experiments involving sand culture were conducted in 2003 and 2004 in a green house to evaluate corn and red pepper biomass. The rNDVI, gNDVI and aNDVI by ground-based remote sensors were used for evaluation of corn and red pepper biomass. The result obtained from the case study was shown that ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season crop nitrogen management providing both spatial and temporal information.

• Korean Journal of Remote Sensing
• /
• v.28 no.6
• /
• pp.693-704
• /
• 2012

Space-born remote sensing camera systems tend to be developed to have very high performances. They are developed to provide extremely small ground sample distance, wide swath width, and good MTF (Modulation Transfer Function) at the expense of big volume, massive weight, and big power consumption. Therefore, the camera system occupies relatively big portion of the satellite bus from the point of mass and volume. However, the camera systems for lunar exploration don't need to have such high performances. Instead, it should be versatile for various usages under various operating environments. It should be light and small and should consume small power. In order to be used for national program of lunar exploration, electro-optical versatile camera system, called MAEPLE (Multi-Application Electro-Optical Payload for Lunar Exploration), has been designed after the derivation of camera system requirements. A ground model of the camera system has been manufactured to identify and secure relevant key technologies. The ground model was mounted on an aircraft and checked if the basic design concept would be valid and versatile functions implemented on the camera system would worked properly. In this paper, results of design and functional test performed with the field campaigns and air-born imaging are introduced.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.750-752
• /
• 2003

The objective of this investigation is to compare the geometric precision of Rigorous Sensor Model and Rational Function Model for QuickBird images. In rigorous sensor model, we use the on-board data and ground control points to fit an orbit; then, a least squares filtering technique is applied to collocate the orbit. In rational function model, we first use the rational polynomial coefficients provided by the satellite company. Then the systematic bias of the coefficients is compensated by an affine transformation using ground control points. Experimental results indicate that, the RFM provides a good approximation in the position accuracy.