• 대한치과의사협회지
• /
• 제52권12호
• /
• pp.762-770
• /
• 2014

Bony exostosis, one of the osseous deformities, could act as a contributing factor of periodontal disease since it makes proper tooth brushing difficult and causes traumatic ulcer. The purpose of this case report is to show improvement of periodontal health by removal of bony exostoses and creation of physiologic osseous form. A 58 year-old female patient with recurrent ulcer and pain on bony exostoses located on left maxillary palatal area and both mandibular buccal areas was treated. Exostoses were removed and physiologically positive osseous form was created following vertical grooving, radicular blending, flattening interproximal bone and gradualizing marginal bone. The patient showed no further recurring traumatic ulcer and bone exposure. Moreover, periodontal pocket was eliminated and food impaction was decreased. In conclusion, periodontal health could be achieved through removal of multiple bony exostoses and development of ideal osseous form.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.63-70
• /
• 2020

As the consumer market in the VR(virtual reality) and the head-up display industry grows, the demand for 5-axis machines and grooving machines using on a ultra-precision machining increasing. In this paper, ultra-precision diamond tools satisfying the cutting edge width of 500 nm were developed through the process research of a focused ion beam. The material used in the experiment was a single-crystal diamond tool (SCD), and the equipment for machining the SCD used a focused ion beam. In order to reduce the influence of the Gaussian beam emitted from the focused ion beam, the lift-off process technology used in the semiconductor process was used. 2.9 ㎛ of Pt was coated on the surface of the diamond tool. The sub-micron tool with a cutting edge of 492.19 nm was manufactured through focused ion beam machining technology. Toshiba ULG-100C(H3) equipment was used to process fine-pattern using the manufactured ultra-precision diamond tool. The ultra-precision machining experiment was conducted according to the machining direction, and fine burrs were generated in the pattern in the forward direction. However, no burr occurred during reverse machining. The width of the processed pattern was 480 nm and the price of the pitch was confirmed to be 1 ㎛ As a result of machining.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.52-52
• /
• 2018

Apple (Malus domestica) is one of the most economically important fruits in Korea. But virus infection has decreased sustainable production of apple and caused the serious problems such as yield loss and poor fruit quality. Virus or viroid infection including Apple chlorotic leaf spot virus (ACLSV), Apple stem pitting virus (ASPV), Apple stem grooving virus (ASGV), Apple mosaic virus (ApMV) and Apple scar skin viroid (ASSVd) has been also reported in Korea, furthermore, its damages and economic losses have increased constantly. In our research, we tried to survey virus infection for commercial nursery trees of major apple cultivars, especially dwarfing rootstocks 'M.9' and 'M.26' as well as scions. Trees were collected from 11 locations which have produced a great amount of apple nursery stocks in Korea. Infection degree was investigated in apple cultivars, 'Hongro' and 'Fuji' using RT-PCR method. In the scion of cultivar 'Hongro', infection ratio of ACLSV, ASPV and ASGV were 100%, 81.8% and 100% respectively. In the rootstock of cultivar 'Hongro', infection ratio of ACLSV, ASPV, ASGV and ApMV were 90.9%, 81.8%, 100% and 9.1% respectively. In the scion of cultivar 'Fuji', infection ratio of ACLSV, ASPV and ASGV were 81.8%, 90.9% and 100% respectively. In the rootstock of cultivar 'Fuji', infection ratio of ACLSV, ASPV, ASGV and ApMV were 81.8%, 90.9%, 100% and 9.1% respectively. Infection of ASSVd was not detected in both cultivars. From our results, it was found that most of apple rootstocks and scions had multiple infections by apple viruses which have caused economic damage in fruit production.

• Corrosion Science and Technology
• /
• 제19권3호
• /
• pp.122-130
• /
• 2020

In this study, a corrosion failure analysis of a heat transport pipe was conducted, as the result of a pinhole leak. Interestingly, the corrosion damage occurred externally in the pipeline, resulting in severe thickness reduction near the seam line. Also, while a stable magnetite protective film formed on the inner surface, the manganese oxide formation occurred only on the outer surface. The interior and exterior of the pipe were composed of ferrite and pearlite. The large manganese sulfide and alumina inclusions were found near the seam line. In addition, the manganese sulfide inclusions resulted in grooving corrosion, which progressed in the seam line leading to the reduction in the thickness, followed by the exposure of the alumina in the matrix to the outer surface. To note, the corrosion was accelerated by pits generated from the boundaries separating the inclusions from the matrix, which resulted in pinhole leaks and water loss.

• 대한족부족관절학회지
• /
• 제17권4호
• /
• pp.288-293
• /
• 2013

Purpose: Number of arthroscopic surgery is gradually increasing with development of its equipment and technique. Arthroscopic ankle surgery performed with the traction device has various complications and need more time for preparation. We investigated whether the complication rate increased when surgery was performed without the traction device, and compared the complication rate of arthroscopic surgery with the traction device. Materials and Methods: From January 2009 to June 2012, arthroscopic ankle surgery was performed without the traction device in four hundred eleven cases. There were two hundred sixty-one males and one hundred fifty females. The average age at operation was 35 years (range, 17-56), and the average follow up period was 28 months (range, 12-41). Postoperative symptoms and complications were checked. Results: There were difficulties performing arthroscopic surgery without the traction device in five cases with severe traumatic osteoarthritis. However, after burring and shaving, we had enough space to work on. Superficial peroneal nerve symptom was found in two cases, grooving of talus was found in 11, and saphenous vein injury was found in five. Since preparing for the traction device was unnecessary, we were able to save time with the mean duration of surgery of 50 minutes (range, 30-120). Conclusion: With only manual traction, we could explore the entire ankle joint without damage on cartilage. Yet, skilled arthroscopic technique will be necessary for arthroscopic surgery without the traction device.

• The Plant Pathology Journal
• /
• 제32권5호
• /
• pp.441-451
• /
• 2016

Deep sequencing has generated 52 contigs derived from five viruses; Apple chlorotic leaf spot virus (ACLSV), Apple stem grooving virus (ASGV), Apple stem pitting virus (ASPV), Apple green crinkle associated virus (AGCaV), and Apricot latent virus (ApLV) were identified from eight apple samples showing small leaves and/or growth retardation. Nucleotide (nt) sequence identity of the assembled contigs was from 68% to 99% compared to the reference sequences of the five respective viral genomes. Sequences of ASPV and ASGV were the most abundantly represented by the 52 contigs assembled. The presence of the five viruses in the samples was confirmed by RT-PCR using specific primers based on the sequences of each assembled contig. All five viruses were detected in three of the samples, whereas all samples had mixed infections with at least two viruses. The most frequently detected virus was ASPV, followed by ASGV, ApLV, ACLSV, and AGCaV which were withal found in mixed infections in the tested samples. AGCaV was identified in assembled contigs ID 1012480 and 93549, which showed 82% and 78% nt sequence identity with ORF1 of AGCaV isolate Aurora-1. ApLV was identified in three assembled contigs, ID 65587, 1802365, and 116777, which showed 77%, 78%, and 76% nt sequence identity respectively with ORF1 of ApLV isolate LA2. Deep sequencing assay was shown to be a valuable and powerful tool for detection and identification of known and unknown virome in infected apple trees, here identifying ApLV and AGCaV in commercial orchards in Korea for the first time.

• Computers and Concrete
• /
• 제24권2호
• /
• pp.159-172
• /
• 2019

This paper presents an investigation into the flexural behavior of reinforced concrete (RC) beams retrofitted by ultra-high performance fiber-reinforced concrete (UHPFRC) layers. The experimental study has been conducted in two parts. In the first part, four methods of retrofitting with UHPFRC layers in both the up and down sides of the beams have been proposed and their efficiency in the bonding of the normal concrete and ultra-high performance fiber-reinforced concrete has been discussed. The results showed that using the grooving method and the pre-casted UHPFRC layers in comparison with the sandblasting method and the cast-in-place UHPFRC layers leads to increase the load carrying capacity and the energy absorption capacity and causes high bond strength between two concretes. In the second part of the experimental study, the tests have been conducted on the beams with single UHPFRC layer in the down side and in the up side, using the effective retrofitting method chosen from the first part. The results are compared with those of non-retrofitted beam and the results of the first part of experimental study. The results showed that the retrofitted beam with two UHPFRC layers in the up and down sides has the highest energy absorption and load carrying capacity. A finite element analysis was applied to prediction the flexural behavior of the composite beams. A good agreement was achieved between the finite element and experimental results. Finally, a parametric study was carried out on full-scale retrofitted beams. The results indicated that in all retrofitted beams with UHPFRC in single and two sides, increasing of the UHPFRC layer thickness causes the load carrying capacity to be increased. Also, increases of the normal concrete compressive strength improved the cracking load of the beams.

• 식물병연구
• /
• 제25권1호
• /
• pp.43-47
• /
• 2019

Apple chlorotic leaf spot virus (ACLSV), Apple stem pitting virus (ASPV), Apple stem grooving virus (ASGV), and Apple scar skin viroid (ASSVd) are economically important viruses that infect pear tree species worldwide. To evaluate the prevalence of these viruses in Korea, we investigated infection degree of three viruses and one viroid for the commercial nursery trees of the pear cultivars, Niitaka, Chuwhang, Wonwhang, and Whasan in 2017 and 2018. The results showed that the infection ratio of ACLSV, ASPV, ASGV, and ASSVd for the scion of pear cultivar Niitaka was 10%, 45%, 77%, and 50%, respectively. From the scion of pear cultivar Chuwhang, infection ratios of ASPV, ASGV, and ASSVd were found to be 70%, 50%, and 60%, respectively. From the scion of pear cultivar Whasan, infection ratios of ACLSV, ASPV, ASGV and ASSVd were found to be 40%, 60%, 93%, and 20%, respectively. From the root stock of pear cultivar Wonwhang, infection ratios of ACLSV, ASPV, ASGV, and ASSVd showed 28%, 57%, 100%, and 14%, respectively. ASGV had the highest recorded infection rate, and ACLSV was characterized by the lowest infection rate. The mixed infection ratio of Niitaka, Chuwhang, Whasan, and Wonwhang was 45%, 60%, 70%, and 85%, respectively.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.913-920
• /
• 2012

In spite of some problems in processability and bondability, Au wires in the microelectronics industry are gradually being replaced by copper wires to reduce the cost of raw material. In this article, the effects of surface roughness enhanced capillaries on thermosonic Cu wire bonding were evaluated. The roughness-enhanced zirconia toughened alumina (ZTA) capillaries were fabricated via a thermal grooving technique. As a result, the shear bond strength of first bonds (ball bonds) bonded using the roughness-enhanced capillary was enhanced by 15% as compared with that of normal bonds due to more effective plastic deformation and flow of a Cu ball. In the pull-out test of second bonds (stitch bonds), processed at two limit conditions on combinations of process parameters, the bond strength of bonds formed using the roughness-enhanced capillary also resulted in values higher by 55.5% than that of normal bonds because of the increase in the bonding area, indicating the expansion of a processing window for Cu wire bonding. These results suggest that the adoption of roughness-enhanced capillaries is a promising approach for enhancing processability and bondability in Cu wire bonding.

• The Plant Pathology Journal
• /
• 제38권5호
• /
• pp.533-540
• /
• 2022

Thunberg fritillary (Fritillaria thunbergii), a perennial used in traditional Chinese herbal medicine, is a members of the family Liliaceae. The degeneration of germplasm is a severe problem in the production of Fritillaria thunbergii var. chekiangensis. However, no information about viral infections of F. thunbergii var. chekiangensis has been reported. In this study, we sequenced the small RNAs of F. thunbergii var. chekiangensis from leaves and bulbs, and viruses were identified using a phylogenetic analysis and BLAST search for sequence. In addition, multiplex reverse transcriptase-polymerase chain reaction (RT-PCR) was used to rapidly detect viruses in this variety. Our study first reported that five viruses infected F. thunbergii var. chekiangensis. Among them, fritillary virus Y (FVY), lily mottle virus (LMoV), Thunberg fritillary mosaic virus (TFMV), and hop yellow virus (HYV) had been reported in F. thunbergii, while apple stem grooving virus was first reported in the genus Fritillaria. A multiplex RT-PCR method was developed to rapidly test the four viruses FVY, LMoV, TFMV, and HYV in F. thunbergii var. chekiangensis. Our results provide a better understanding of the infection of F. thunbergii var. chekiangensis by viruses and a basic reference for the better design of suitable control measures.