• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.545-553
• /
• 1998

Recently a new process known as the magnetic fluid grinding has been developed, which can remove material from the surface of ceramic balls by fifty to one hundred times more rapidly than the conventional lapping process. In this study, the ceramic balls with various compositions are made and ground by using the magnetic fluid grinding technique with various machining parameters. In order to make well-round shaped balls by using the magnetic fluid grinding technique, the fundamental research to find out the machining factors has been carried out. Developing an equipment with higher efficiency and reliability in the machining could certainly lead to the higher productivity with excellent quality of ceramic balls.

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.614-619
• /
• 2009

An engine for marine propulsion and power generation consists of several cylinder liner-piston sets. And the oil groove is on the cylinder liner inside wall for the lubrication between a piston and cylinder. The machining process of oil groove has been carried by manual work so far, because of the diversity of the shape. Recently, we developed an automatic grinding robot system for oil groove machining of engine cylinder liners. It can covers various types of oil grooves and adjust its position by itself. The grinding robot system consists of a robot, a machining tool head, sensors and a control system. The robot automatically recognizes the cylinder liner's inside configuration by using a laser displacement sensor and a vision sensor after the cylinder liner is placed on a set-up equipment.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.10-15
• /
• 2005

For the development of compensation machining program, ultra precision grinding used in ultra precision machine and corrective machining was studied. We explored a new rough grinding technique on optical material such as zerodur. The facility used is a polishing machine with a custom grinding module and a range of diamond resin bond wheel. Surface roughness and form accuracy are measured by surface measurement equipment(Form Talysurf series2). Our compensation machining program has complied with a target of producing surface roughness better than $0.05{\mu}m$ Ra and form accuracy of around $0.05{\mu}m$ Rt and has been unveiled as a work-hour model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1075-1080
• /
• 2008

An engine for marine propulsion and power generation consists of several cylinder liner-piston sets. And the oil groove is on the cylinder liner inside wall for the lubrication between a piston and cylinder. The machining process of oil groove has been carried by manual work so far, because of the diversity of the shape. Recently, we developed an automatic grinding robot system for oil groove machining of engine cylinder liners. It can covers various types of oil grooves and adjust its position by itself. The grinding robot system consists of a robot, a machining tool head, sensors and a control system. The robot automatically recognizes the cylinder liner's inside configuration by using a laser displacement sensor and a vision sensor after the cylinder liner is placed on a set-up equipment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.178-178
• /
• 2009

High-density optical information storing equipment, which is using Blu-ray, is the next generation information storing equipment that has about form six times to thirty-five times capacities. and high-density optical information storing equipment uses high NA(Numerical Aperture) aspheric glass objective lens as optical pick-up equipment to record and recognize high-density date. Generally this objective lens is developed and produced through a way of GMP(Glass Molding Press) that uses molding core that is performde by Ultra precision grinding, but grinding performing that has high-accuracy is very difficult because objective lens form is high NA. In this research, we preformed Ultra precision turning, using single crystal diamond bite, about WC(Co 0.5%), sintering brittleness material that is used molding core's material for GMP. and we confirmed aspheric glass lens compression of deformities molding core's Ultra precision turning possibility by measuring surface roughness(Ra) and processing surface's condition.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.73-78
• /
• 2011

The existent cutting insert have occupied most product of grinding style, because it has a problem of accuracy and manufacturing process. The product has a concept but development is difficult, because grinding and manufacturing by press are impossible. But by development and stabilization of a technology, preference of non-ground insert increases gradually. And then insert that grinding is impossible is developed availably as non-ground product by using developed equipment and software. In this paper reports some experimental results on the machining performance of non-ground Cutting inserts. Three kinds of Cutting inserts were manufactured without using grinding process. Machining experiments were carried out to compare the machining performance of non-ground inserts with that of ground ones. The experimental results indicate that the cutting forces and tool wear and surface roughnesses of machined surface of both ground and non-ground inserts are comparable.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.611-622
• /
• 2016

Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.78-86
• /
• 2014

Since cellulose nanofibrils (CNF) has large specific surface area and high water holding capacity, it is very difficult task to remove water from the CNF suspension. However, dewatering of CNF suspension is a prerequisite of following processes such as mat forming and drying for the application of CNF. In this study, we evaluated the drainage of cellulose fibers suspension under vacuum and pressure conditions depending on the number of grinding passes. Also, the effect of the addition of cationic polyelectrolyte on dewatering ability of CNF suspension was investigated. Regardless of dewatering condition, the total drained water amount as well as the drainage rate were decreased with an increase in the number of grinding passes. Pressure dewatering equipment enables us to prepare wet CNF mat with relatively higher grammage. The cationic polyelectrolytes improved the dewatering ability of CNF suspension by controlling the zeta potential of CNF. The fast drainage was obtained when CNF suspension had around neutral zeta potential.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1683-1691
• /
• 2013

콘크리트 표면절삭 작업은 포장면의 노화 또는 파손으로 인한 보수작업과 그루빙(Grooving) 시공을 통한 포장면의 배수능력을 강화하거나 평탄성을 확보를 위하여 자주 적용되는 공법이다. 그러나 그 작업특성이 노동집약적이고 분진, 슬러지, 소음 등으로 인한 유해한 작업환경을 보유하고 있으며 장비를 다루는 기능공의 숙련도에 따라 생산성 및 절삭품질의 편차가 큰 경향이 있다. 따라서 장비 조종자가 각종 위험에 노출되지 않도록 하기 위한 원격조종 콘크리트 표면절삭 장비 개발이 필요하다. 원격 조종 환경에서는 조종자가 객관적인 절삭 품질을 확인함과 동시에 장비가 계획 경로에 따라 작업이 올바르게 수행되고 있는지를 확인할 수 있도록 하는 지원시스템이 필요케되는 바, 본 연구에서는 머신비전 시스템(Machine Vision System)과 GPS를 적용하여 네트워크 카메라로 촬영한 절삭면의 이미지를 디지털 영상처리(Image Processing)과정을 거쳐 객관적이며 품질관리 프로세스가 자동화된 시스템을 구축하였다. 또한 장비의 현재 위치와 방향, 속도, 계획된 경로와의 오차정보 그리고 작업의 진척도 등을 종합적으로 산출하여 워크 스테이션에 표시함과 동시에 머신 비전 시스템에 의한 작업 품질 정보와의 통합을 위한 프로그램을 개발하였으며, 현장 적용 테스트를 통해 본 기술을 검증하였다.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.469-476
• /
• 2009

Hard facing overlay welding in high chromium carbide is a representative way of extending the fatigue life or recompensing damage, because workpiece surface is uniformly overlay-welded by alloy material. In general, grinding process is currently used for finish due to hardness of weld material. The development of tool material, such as PCBN, has made it possible to use turning instead of grinding. There are many advantages of hard Owning, as lower equipment costs, shorter setup time, fewer process steps, higher material removal rate, better surface integrity and the elimination of cutting fluid. In this paper, machining characteristics and cutting performance are examined to investigate turning possibility of overly welding in high chromium carbide.