• Journal of Environmental Science International
• /
• v.30 no.8
• /
• pp.605-612
• /
• 2021

Supply electrical conductivity (EC) concentration of the nutrition solution is an important factor in the absorption of nutrients by plants and the management of the root zone, as it can control the vegetative/reproductive growth of a plant. Paprika usually undergoes its reproductive and vegetative growth simultaneously. Therefore, ensuring proper growth of the plant leads to increased yield of paprika. In this study, growth characteristics of paprika were examined according to the EC concentration of a coir and a rockwool substrate. The supply EC was 1.0, 2.0, and 4.0 mS·cm^-1 applied at the initial stages of the growth using the rockwool (commonly used by paprika farmers) and the coir substrate with a chip and dust ratio of 50:50 and 70:30. For up to 16 weeks of paprika growth, EC concentrations of 1.0 and 2.0 mS·cm^-1 were found to have a greater effect on the growth than EC at 4.0 mS·cm^-1. The normality (marketable) rate of fruit, the soluble solid content, and paprika growth showed that the coir was generally better than the rockwool regardless of the supply EC concentration. The values of the yield per plant at an EC concentration of 4.0 mS·cm^-1 was mostly similar at 1.6 kg (coir 50:50), 1.5 kg (coir 70:30) and 1.5 kg (rockwool), but the yield of the rockwool was 88%, which was lower than 98% and 94% yield of the coir substrate. Therefore, this concludes that coir substrate is more effective than rockwool at improving paprika productivity. The results also suggest that the use of coir substrate for paprika has many benefits in terms of reducing production costs and preventing environmental destruction during post-processing.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.43-52
• /
• 2021

As port development in soft ground is actively promoted for international logistics and transportation, the Deep Mixing Method (DMM) is continuously applied to form an improved column body directly in the ground by mixing cement with soil to secure the stability of the structure. However, in the case of cement, there is a problem of emitting a lot of greenhouse gases during the production process, so the development and use of new alternative materials are socially required to achieve the national goal of carbon neutrality. Accordingly, in this study, CMD-SOIL, developed to induce a hardening reaction similar to cement by recycling recycled resources, was used as a ground improvement material for the DMM. In addition, it was attempted to determine the possibility of replacing cement by conducting on-site test construction and evaluating applicability. As a result of the study, the compressive strength of CMD-SOIL compared to the design reference strength was 1.46 to 2.64 times higher in the field mixing test and 1.2 to 5.03 times higher than in the confirmed boring. In addition, the ratio (λ) of the compressive strength in the field to the design reference strength was 0.63 to 1.14, which was similar to the previous research results. Therefore, in the case of CMD-SOIL, it is possible to express the compressive strength necessary to secure stability, and there is no difference in applicability compared to existing materials such as ordinary portland cement and blast furnace slag cement, so it was analyzed that it could be used as a ground improvement material for the DMM.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.37-45
• /
• 2022

The development of the electrical, electronic, and telecommunication industries has increased the share of electricity in total energy consumption. With the enforcement of the Act on the Promotion of the Development, Use, and Diffusion of New and Renewable Energy in 2021, the mandatory supply ratio of new and renewable energy is expected to expand, and the amount of waste cables generated in the stage of replacing and discarding cables used in the industry is also expected to increase. The purpose of this study was to quantify the environmental burden of waste cable recycling through the life cycle assessment (LCA) method. The results showed that the higher the amount of glue contained in the waste cable, the greater was the amount of fine dust and greenhouse gases generated. In addition, by assigning weights to 10 environmental burden items, it was confirmed that the marine aquatic eco-toxicity potential (MAETP) and human toxicity potential (HTP) had the greatest environmental burden. The main causes were identified as heptane and ethanol, which were the glue contained in the waste cable and the cleaning solutions used to remove them. Therefore, it is necessary to refrain from using glue in the cable production process and reduce the environmental burden by reducing the use of waste cable cleaning solutions used in the recycling process or using alternative materials.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.30-42
• /
• 2022

OSC is a type of supply chain and value chain that spans the entire process of construction production (planning, design, construction, maintenance, etc.). It is a method of producing the final object by manufacturing it in a factory, transporting it to the site, installing and construction. This research as is the construction cost was compared for each case A, which applied the PC method, and case B, which applied the RC method. In the case of applying the PC method (excluding the PC design cost), compared to the case where only the RC method was applied, the frame construction cost per unit quantity (m³) increased by about 70% (50% based on the total RC construction type). Of the total frame construction cost of PC method application, PC accounted for 90.2%, 'PC manufacturing cost' 54.8%, 'PC assembly cost' 28.5%, and 'transportation cost' accounted for 6.89%. Also a decision-making framework that can consider both costs and benefits was established. In the case of benefits, the construction period, defect repair, disaster occurrence, energy efficiency, noise/dust/waste, and greenhouse gas emission indicators reflecting OSC technical advantages were presented. It can contribute to providing a basis for helping decision-making on the introduction of PC apartment houses using OSC.

• Journal of Animal Science and Technology
• /
• v.65 no.1
• /
• pp.132-148
• /
• 2023

Ruminants are the main contributors to methane (CH₄), a greenhouse gas emitted by livestock, which leads to global warming. In addition, animals experience heat stress (HS) when exposed to high ambient temperatures. Organic trace minerals are commonly used to prevent the adverse effects of HS in ruminants; however, little is known about the role of these minerals in reducing enteric methane emissions. Hence, this study aimed to investigate the influence of dietary organic trace minerals on rumen fermentation characteristics, enteric methane emissions, and the composition of rumen bacteria and methanogens in heat-stressed dairy steers. Holstein (n=3) and Jersey (n=3) steers were kept separately within a 3×3 Latin square design, and the animals were exposed to HS conditions (Temperature-Humidity Index [THI], 82.79 ± 1.10). For each experiment, the treatments included a Control (Con) consisting of only basal total mixed rations (TMR), National Research Council (NRC) recommended mineral supplementation group (NM; TMR + [Se 0.1 ppm + Zn 30 ppm + Cu 10 ppm]/kg dry matter), and higher concentration of mineral supplementation group (HM; basal TMR + [Se 3.5 ppm + Zn 350 ppm + Cu 28 ppm]/kg dry matter). Higher concentrations of trace mineral supplementation had no influence on methane emissions and rumen bacterial and methanogen communities regardless of breed (p > 0.05). Holstein steers had higher ruminal pH and lower total volatile fatty acid (VFA) concentrations than Jersey steers (p < 0.05). Methane production (g/d) and yield (g/kg dry matter intake) were higher in Jersey steers than in Holstein steers (p < 0.05). The relative abundances of Methanosarcina and Methanobrevibacter olleyae were significantly higher in Holstein steers than in Jersey steers (p < 0.05). Overall, dietary organic trace minerals have no influence on enteric methane emissions in heat-stressed dairy steers; however, breed can influence it through selective alteration of the rumen methanogen community.

• Clean Technology
• /
• v.30 no.2
• /
• pp.105-112
• /
• 2024

Globally, the demand for electric vehicles has surged due to greenhouse gas regulations related to climate change, leading to an increase in the production of used batteries as a consequence of the battery life issue. This study aims to selectively leach and recover valuable metal lithium from the cathode material of spent LFP (LiFePO₄) batteries among lithium-ion batteries. Generally, the use of inorganic acids results in the emission of toxic gases or the generation of large quantities of wastewater, causing environmental issues. To address this, research is being conducted to leach lithium using organic acids and other leaching agents. In this study, selective leaching was performed using the organic acid methane sulfonic acid (MSA, CH₃SO₃H). Experiments were conducted to determine the optimal conditions for selectively leaching lithium by varying the MSA concentration, pulp density, and hydrogen peroxide dosage. The results of this study showed that lithium was leached at approximately 100%, while iron and phosphorus components were leached at about 1%, verifying the leaching efficiency and the leaching rates of the main components under different variables.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.891-899
• /
• 2015

The lily symptomless virus (LSV) is the most common virus in Korean native lilies and causes various types of damage to overall plant growth. This study was carried out to investigate the elimination rate of the LSV by the in vitro scale culture (scaling) method in Korean native lilies and to test reinfection rates of the LSV under several field culture conditions of bulb production. Four Korean native lilies (Lilium dauricum, L. distichum, L. lancifolium, and L. maximowitzii) were used and their scales were cultured in vitro for micro-scale formation. The micro-scales were subcultured repeatedly using MS culture medium supplemented with 30 or $90g{\cdot}L^{-1}$ sucrose. The culture conditions were $24{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD with 16 hour daylength using fluorescent lamps and maintained at $22{\pm}2^{\circ}C$. The virus-free bulblets were grown for one to three years in the greenhouse and transplanted to the field in October or March. Virus infection rates were investigated by direct tissue blotting immunobinding assays and measurement of chlorophyll and protein contents. Virus-free plants could be obtained from the 5th subculture of micro-scales in L. lancifolium and L. maximowitzii or from primary culture in L. dauricum and L. distichum. LSV-free plants were reinfected during bulb production in the field. Reinfection rates were higher at older bulb ages and under higher planting density. The plants planted in October and at inland Gyeongsan had higher infection rates than those planted in March and at coastal area Pohang. The reinfection rate of L. maximowitzii was higher than those of L. dauricum and L. lancifolium. The LSV-infected plants had lower chlorophyll contents and unchanged protein contents compared to virus-free plants.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.72-80
• /
• 2016

Gummy stem blight, caused by the fungus Didymella bryoniae, is major disease of watermelons worldwide. The objective of the present study was to establish an efficient screening system to identify watermelon resistant to D. bryoniae. An GSB3 isolate was prepared from a watermelon plant showing typical symptoms of gummy stem blight in Haman-gun and identified as D. bryoniae based on molecular analysis of internal transcribed spacer sequence. A simple mass-production technique of inoculum was developed based on spore production of D. bryoniae GSB3 under several incubation conditions and their virulence on watermelon plants. Resistance degrees of 22 commercial watermelon cultivars to the GSB3 isolate were evaluated. Among them, four watermelon cultivars showing different degree of resistance response were selected for further study. Development of disease on the cultivars according to various conditions including inoculum concentrations, incubation periods in dew chamber, and incubation temperatures was investigated. From the results, we suggest an efficient screening method for resistant watermelon cultivars to gummy stem blight. Seeds of watermelon cultivar are sown and grown in a greenhouse until plant stage of 2-fully expanded leaves. Seedlings are inoculated with D. bryoniae by spraying spore suspension of the fungus at a concentration of $5.0{\times}10^5spores/ml$. The infected plants are incubated in humidity chamber at $25^{\circ}C$ for 48 hours and then transferred to a growth chamber at $25^{\circ}C$ and 80% relative humidity with 12-hour light a day. Three to four days after inoculation, disease severity of the plant are measured using percentage of infected leaf area.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.2
• /
• pp.118-126
• /
• 2002

To evaluate the correlations of microbial populations with soil healthiness and crop production and establish the criteria for microbial population of soil types. We analyzed the microbial community structure of 13 soils which were different in physical and chemical properties and cultivation methods. According to the analysis of microbial population suing the dilution plate method, the large differences of the microbial population structures among soil types were shown: aerobic bacteria $2-27{\times}10^6$, fluorescent Pseudomonas $1-1,364{\times}10^5$, Gram negative bacteria $1-126{\times}10^4$, and mesophilic Bacillus $1-110{\times}10^5$. The density of Gram negative bacteria was highest on red pepper cultivating soils (sample no. 4 and 6) of Umsung and Gesan, Chungbuk, and the density of the fluorescent Pseudomonas was highest on greenhouse soil (sample no. 7) of Jinju, Kyungnam. The crop productivity of three soils was high as compared with those of other soils. It was supposed that the density of fluorescent Pseudomonas and mesophilic Bacillus were correlated with the incresed crop production. By MIDI analysis, 579 strains isolated from 13 soils composed of a variety of microbes including 102 isolates of Agrobacterium, 112 isolates of Bacillus, 32 isolates of Pseudomonas, 44 isolates of Kocuria, and 34 isolates of Pseudomonas. Among the 624 isolates of Gram negative bacteria, Pseudomonas including P. putida and p. fluorescens occupied the highest density (51%), and Stenotrophomonas maltophilia and Burkholderia cepacia also appeared at high density. From RAPD analysis, the fluorescent Pseudomonas strains isolated from 13 soil types showed a high level of strain diversities and were grouped into 2 - 14 patterns according to soil types. Many of unknown bacteria were recovered from the paddy soil, and needed to be further characterized on the molecular basis.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.80-88
• /
• 2020

This study was conducted to examine the effect by application method and concentration of the indole-3-butyric acid (IBA), which is auxin-based plant growth regulator, on the growth and runner plants production of strawberry in the greenhouse. The seedlings of strawberry were transplanted in the pot (150 ×135 × 90 mm) filled with coir medium on April 12, 2019. The IBA was applied with a foliar spray or drench as 50, 100, 150, and 200 mg·L^-1 (50 mL per plant), respectively. The treatment was started on April 29, 2019. The foliar spray and drench treatment of IBA were repeated at 2-week intervals for 9 weeks from the start date of treatment. At 9 weeks after treatment, the petiole length of mother plants was the shortest in the control. The number of runner plants showed a tendency to decreased in the foliar spray. The number of lateral buds showed a tendency to decreased in the IBA treatment, and the least in the foliar with 100 mg·L^-1. There was not significantly difference in the fresh and dry weights of the first and second runner plants. However, in the third runner plants, the fresh and dry weights were the greatest in the drench with 100 mg·L^-1. Therefore, when considering the growth of third runner plants and lateral bud suppression, the drench with the 100 mg·L^-1 could be better application method and concentration of IBA treatment for growth of the third runner plants and runner plants production of strawberry, and the results can be used as a basic research of plant growth regulator application to save the labor force and enhance the seedling quality in strawberry seedling stage.