• Journal of Korean Society of Forest Science
• /
• v.83 no.2
• /
• pp.205-210
• /
• 1994

This study was conducted to develop a method of mass production by cutting of superior genotypes of Larix leptolepis and to examine the effects of ortet age, clone, crown position, and an applied plant growth substance upon the rooting of cuttings. Four different ortet ages, 2, 8, 16 and 30 years and three levels of root-promoting substances, indole butyric acid(IBA), at 1000, 2000, and 5000ppm were employed. Greenwood cuttings were taken from mother trees in late July and rooted for three months in rooting medium containing peatmoss : vermiculite : perlite(1 : 1 : 1 by volume). with temperature controlled at $20-25^{\circ}C$, humidity by intermittent misting and light by partial shading in the greenhouse. Cuttings treated with 1000ppm IBA showed highest rooting, with 80%, 71%, 52%, 25% for 2-, 8-, 16-. 30-year-old ortet, respectively. Untreated cuttings showed rooting of 52%, 48%, 36%, 20% for the ortet age of 2, 8, 16, 30 years, respectively. The average number of adventitious roots decreased with increasing ortet age from 2 to 30 years, whereas IBA treatment increased the number of roots in all ages. A variation in rooting among 20 clones tested was observed. The 4 clones, Chungnam 6, and 7 and Chonbuk 1, and 9 showed good rooting of about 67%, while Kangwon 49 showed boor rooting of 40% at 1000ppm IBA treatment. When crown position was compared, cuttings taken from middle crown showed highest rooting of 60%, while cuttings from upper crown showed lowest rooting of 53%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4679-4688
• /
• 2011

This study was performed to the municipal waste generation amounts and characteristics for B city in Gangwon province, predicted the methane gas generation rate emitted from landfill, and analyzed the possibility of energy recovery to RDF(Refuse Derived Fuel) using combustible waste. The study results showed that the average bulk density of municipal waste for B city was 144.0 kg/$m^3$, and the average ratios of combustible waste were 36.0 % of paper, 21.6 % of vinyl, and 19.7 % of food waste. respectively. In the experiment for heating value, high and low heating value(moisture) was measured to 3,471 $kca{\ell}$/kg and 2,941 $kca{\ell}$/kg, respectively. After the prohibition of burying of food waste in landfill, the heating value of municipal waste was dramatically increased due to increase of the ratio of paper, vinyl, and plastic waste. The prediction results of methane gas generation rate emitted from landfill showed that the gas generation rate is increasing to 2,505.7 CH4 ton/year in 2021. After then, the rate is decreasing gradually. When the RDF facility is installed, the rate is decreasing after peaking at 1,956.9 CH4 ton/year in 2013. The generation rate of LFG emitted from waste landfill of B city was analyzed to 9.92 $m^3$/min, similar to 10.11 $m^3$/min for other city.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.46-54
• /
• 2016

BACKGROUND: The tobacco whitefly(Bemisia tabaci Gennadius) and western flower thrips(Frankliniella occidentalis Pergande) seriously damaged to several greenhouse crops and transmitted plant viruses such as the Tomato Yellow Leaf Curl Virus(TYLCV) and Tomato Spotted Wilt Virus(TSWV). Objective of this study was to elucidate exclusion effects of insect screen nets by various hole sizes and colors for control of the two insect pests in controlled environments such as a closed plant production system.METHODS AND RESULTS: The exclusion effects to various hole sizes of three other colors with 30 individuals of two insect pests was evaluated. B. tabaci was not showed not difference to different colors and sizes. F. occidentalis showed that 0.2 mm black screen was the most effective exclusion than other colors of 0.6 and 0.8 mm.CONCLUSION: The two insects were different reponses to various hole sizes of white and other color screen nets. It was proved that the 0.4 mm white screen net used in this experimental condition was suitable for exclusion of B. tabaci and 0.2 mm black forF. occidentalis.

• Journal of Environmental Science International
• /
• v.28 no.12
• /
• pp.1061-1069
• /
• 2019

Common reed (Phragmites australis) is widespread in reclaimed land and wetland habitats. Every year, the common reed produces extensive colonies by means of underground rhizomes and ground-surface stolons. From an agricultural point of view, the common reed's large biomass is a good material for supplying organic matter. However, it has not yet been studied in terms of seedling production, transplanting conditions, and decomposition characteristics in reclaimed land. Seeds were harvested from the native common reed in Saemangeum, South Korea, the previous year and stored on an open field. The seeds were sowed in the greenhouse at the beginning of April. Common reed decomposition was studied from June to September, with the use of coarse mesh (5 mm) stem litterbags, on three samping dates and with five replicate packs per sample. These packs were dug in five soil condition (low-salinity topsoil, subsoil, high-salinity topsoil, subsoil, paddy topsoil) to 0.2 m and 0.4 m depth. The highest germination rate of common reed seeds was observed in non-salt solution, but the exhibited germination rate was 70% at 9.38 dS m^-1. The plant height of young reed decreased steadily with increasing salinity, but leaf number did not decrease by 9.38 dS m^-1. The survival rate of the two-year-old reed was 83.3%, which was 35% higher than that of the one-year reed. The transplant success rate was 0% in the no vinyl mulching in the soil, but the first year and second year seedlings survived rates were 63% and 83.3%, respectively, in vinyl mulching. Common reed decomposition rates were faster low salinity than high salinity. All nutrient contents were found to fluctuate significantly with time by soil conditions. We also need to study the growth rate of reed transplanting seedlings by soil moisture contents and the comparison of degradation in common reed tissues.

• The Korean Journal of Pesticide Science
• /
• v.8 no.4
• /
• pp.332-337
• /
• 2004

A suspected biotype of Scirpus planiculmis to be resistant to sulfonylurea(SU) herbicides was identified in Seosan reclaimed paddy fields in Korea, in 2004. The fields have been cultivated for monocultural rice production with wet-direct seeding method and continuously treated with SU-based herbicide mixtures for thirteen years since 1990. In greenhouse studies, 6 different SU herbicides, such as azimsulfuron, bensulfuron-methyl, cinosulfuron, ethoxysulfuron imazosulfuron and pyrazosulfuron-ethyl, completely controlled the Musan assession of Scirpus planiculmis at the recommended dose of each herbicide, however, the Seosan accession of S. planiculmis biotype was survived 20 to 45% even treated with 5 times higher dose of each recommended rate of all herbicides treated. The $GR_{50}$ values of 6 SU herbicides for Seosan accession of S. planiculmis were 47 to 100 times higher than those for Musan accession of S. planiculmis. The $I_{50}$ values pyrazosulfuron-ethyl to acetolactate synthase(ALS) extracted from Sesan and Muan accession of S. planiculmis were 409 nM and 0.8 nM, respectively. The $I_{50}$ value of Seosan was 511 times higher than that of Muan accession. These results suggested that the Seosan accession of S. planiculmis have strong resistant characteristics to 6 SU herbicides, respectively, indicating that resistance might be due to the alteration in the target site of ALS.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.395-400
• /
• 2012

In order to survey the actual pesticide usage, this survey was carried out on the growers of 3 plant groups, fruit vegetables, fruits and rice field, from 2009 to 2011. 390 farmers were selected from main production areas to investigate their pesticide application during the growing seasons. Input amounts per area of domestic fruit vegetables was surveyed as 11.6 kg a.i./ha for red pepper of field culture, 2.0 kg a.i./ha for red pepper of greenhouse, 2.3 kg a.i./ha for strawberry, 2.2 kg a.i./ha for watermelon, 4.8 kg a.i./ha for cucumber, 1.5 kg a.i./ha for oriental melon and 2.1 kg a.i./ha for tomato, respectively. Input amounts per area on fruits and on rice field were surveyed as 11.7 kg a.i./ha for apple, 12.5 kg a.i./ha for pear, 7.7 kg a.i./ha for peach, 4.5 kg a.i./ha for grape, 40.0 kg a.i./ha for citrus 5.4 kg a.i./ha for persimmon, and 3.46 kg a.i./ha for rice, respectively. As a result of the actual pesticide usage survey, The safety guideline for pesticide use is generally kept well by all farmers of fruits vegetables, fruits and rice.

• Journal of Korea Water Resources Association
• /
• v.46 no.7
• /
• pp.745-754
• /
• 2013

The systematic analysis and evaluation of required energy in the processes of drinking water production and supply have attracted considerable interest considering the need to overcome electricity shortage and control greenhouse gas emissions. On the basis of a review of existing research results, a practical method is developed in this study for evaluating energy in water supply networks. The proposed method can be applied to real water supply systems. A model based on the proposed method is developed by combining the hydraulic analysis results that are obtained using the EPANET2 software with a mathematical energy model on the MATLAB platform. It is suggested that performance indicators can evaluate the inherent efficiency of water supply facilities as well as their operational efficiency depending on the pipeline layout, pipe condition, and leakage level. The developed model is validated by applying it to virtual and real water supply systems. It is expected that the management of electric power demand on the peak time of water supply and the planning of an energy-efficient water supply system can be effectively achieved by the optimal management of energy by the proposed method in this study.

• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.230-238
• /
• 2009

We study about small gas engine and fuel cell CHP (Combined Heat and Power) as the technologies for energy conservation and $CO_2$ emissions reduction. Korea government plans to use them in near future. This study quantitatively analyzed energy consumption and $CO_2$ emissions reduction potential of small CHP instead of existing electric power plant (coal steam, combined cycle and oil steam) using LEAP (Long-range Energy Alternative Planning system) as energy-economic model. Three future scenarios are discussed. In every scenario similar condition for each CHP is used. Alternative scenario I: about 6.34% reduction in $CO_2$ emissions is observed in 2019 due to increase in amount of gas engine CHP and fuel cell CHP while coal use in thermoelectric power plant is almost stagnant. In alternative scenario II: a small 0.8% increase in $CO_2$ emission is observed in 2019 keeping conditions similar to alternative scenario I but using natural gas in combined cycle power plant instead of coal. During alternative scenario II overall $CO_2$ emission reduction is observed in 2019 due to added heat production from CHP. Alternative scenario III: about 0.8% reduction in $CO_2$ emissions is observed in 2019 using similar CHP as AS I and AS II. Here coal and oil are used in thermoelectric power plant but the quantity of oil and coal is almost constant for next decade.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.51-63
• /
• 2017

Paris Agreement on Climate Change(2015) requires to reduce the greenhouse gas emission. One of the responses to the requirement is to change the proportion of power generation, which is summarized to the decrease in thermal power and the increase in new and renewable power. This article conducts a comparative analysis on the economic effects between thermal- and new and renewable- power generations, using the Input-Output Table from The Bank of Korea. The results of this analysis show that the new and renewable power generation has got the larger effects in production-inducing, value-added-inducing, employment-inducing, and supply-shortage scopes, while the smaller effect in price-pervasive scope than the thermal power generation. According to these results, the complex consideration should be taken into when the changes in power generation mix are tried. Especially, the political efforts to reduce the supply-shortage effect of new and renewable power and the price-pervasive effect of thermal power will be important.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.2
• /
• pp.13-21
• /
• 2020

In Korea, small reservoirs have been constructed for the supply of agricultural water, but most of them have been over 50 years from the year of construction. Aging agricultural reservoirs are being investigated for serious defects such as leaks and movements in slope, which are very vulnerable to safety. Accordingly, grouting methods are used to reinforce aging agricultural reservoirs in Korea. However, cement used as a grouting injection material consumes natural resources and generates a large amount of greenhouse gases during production. In addition, there is a problem that sufficient reinforcement is not made due to various factors such as the injection amount, the compounding ratio, the injection pressure, and etc. Therefore, due to these problems, the development of new materials and methods that can replace the grouting method and cement is required. In order to solve these problems, this study conducted an laboratory test on the surface stabilizer used to secure the stability of road and rail slopes. In addition, the program was analyzed and the reinforcing effect was examined when the surface stabilizer was used as reinforcement material for aging agricultural reservoir. As a result of the laboratory test, when the surface stabilizer is mixed, the increase of cohesion is possible up to 9% and there is no change in the friction angle. The results of the program analysis showed that the 1.0m reinforcement of slopes increased the factor of safety by 1.4 times, making it possible to reinforce the aging agricultural reservoir using surface stabilizers. And as a reinforcement method, it was analyzed that it is most appropriate to reinforce the slope and the bottom of slope simultaneously.