• Journal of Korea Foundry Society
• /
• v.30 no.3
• /
• pp.115-120
• /
• 2010

Recently, an advanced raw material supplying system in diecasting industry that molten metal produced by the raw material supplier can be directly delivered to the diecasting shops was proposed. It was known to have advantages of reducing melting process cost and improving working environment. However, for its successful mass production, the development of high insulation ladle is inevitable. In this study, the optimal mixing ratio of $SiO_2-Al_2O_3$ was investigated and the high insulation ladle with computer simulation result was built in a prototype and evaluated. The prototype which has refractory wall of $SiO_233%-Al_2O_3$ 35%-CaO 33% showed high insulation sufficient for carrying the Al molten metal for 138 minutes. Gas quantity result and SEM-EDS analysis on the melt poured in the ladle also showed extremely low level of 0.028 cc / 100 g and no penetration of Al molten metal into the refractory wall, satisfying the requirements for mass production.

• Journal of Navigation and Port Research
• /
• v.28 no.9
• /
• pp.809-813
• /
• 2004

Experiments revealed that green water phenomena resemble dam-break, in which flow over deck edge forms a vertical wall of water and suddenly falls down into deck. In this paper the dam breaking problems were formulated using Glimm's algorithm, so-rolled, Random Choice method and, several validations were presented.

• Journal of People, Plants, and Environment
• /
• v.23 no.2
• /
• pp.179-189
• /
• 2020

In order to increase the indoor air purification effect of plants, plants need to be placed on 5-10% of indoor spaces. To increase the density and utilization of plants in indoor spaces, studies on bio-wall, a vertical green wall system, have been recently conducted. The purpose of this study was to investigate the growth characteristics of 7 indoor plants introduced to the system and their rooting zones at different irrigation cycles. This study was conducted to investigate a proper irrigation cycle for the continuous maintenance of bio-wall systems. The conditions of their growth environment were maintained as follows: light intensity, 20-50 μmol·m^-2·s^-1 PPFD; and temperature, 20 - 25℃. For fertilization, Hyponex diluted with water at the ratio of 1:1,000 was supplied to plants. Irrigation was treated at intervals of 1, 3, 5, and 7 days for 1 hour at a time. As a result, there was no significant difference in the growth of plants between different irrigation cycles. Dieffenbachia 'Marianne' showed a significant decrease in the number of leaves at the irrigation cycle of 7 days. In addition, the chlorophyll content was relatively low at the irrigation cycle of 7 days. In terms of the color of leaves, a decrease in L value and b value and an increase in a value were observed, resulting in changes in brightness and color. Ardisia pusilla 'Variegata' showed a slightly higher photosynthetic activity and stomatal conductance when it was watered every day and once per 5 days, while Epipremnum aureum showed a relatively higher photosynthetic activity and stomatal conductance at the irrigation cycle of 3 days. In the case of root activity, it was found that the longer irrigation cycle, the higher root activity compared to daily irrigation. The development of roots of Peperomia clusiifolia was promoted by watering at long intervals. However, in the case of Aglaonema 'Siam-Aurora', the total number of roots decreased at the interval of 7 days. In conclusion, a proper irrigation cycle for the sustainable maintenance of vertical bio-wall systems seems to be 3 days.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.1
• /
• pp.79-86
• /
• 2012

It is very important to investigate and understand the motion of a FPSO on waves because green water phenomenon occurs owing to the relative motions between incident waves and a ship on them. In this research, both experimental and some numerical approaches have been performed in head sea conditions with regular waves. As an object model of this research, a FPSO model is set free to heave and pitch during the experiments. Also, the motions of the FPSO model which are the results of the experiments are used for the corresponding numerical computations. The purpose of this study is to clarify the effect of bow flare on green water load. In this research, it is found that the amount of green water entered from the side of bow is decreased by the increase of bow flare angle. Moreover, the relation between the green water on the bow upper deck and the impact load on the vertical wall located at turrethead is investigated. The results of this research could be used as one of the fundamental data to design bow flares. Also, an optimized bow flare angle is proposed in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.140-147
• /
• 2011

The strength properties of wooden retaining wall which was made with pitch pine were evaluated. Wooden retaining wall was made with diameter 90 mm of pitch pine round posts treated with CUAZ-2 (Copper Azole). The length of the front stretcher of the retaining wall was 3,000 mm. The distance between the headers (the notched member) is 1,000 mm in center and is 900 mm in side. There were connections every 2,000 mm because actually the length of stretcher is limited in the retaining wall. The strength test was carried out according to connection type because the section between stretchers can act as a defect. A result of the strength test according to connection type confirms that connection does not act as defect because the strength of retaining wall in single stretcher is similar to that in the section between stretchers. The strength test of the wooden retaining wall was carried out in 5 types according to the condition of the base section. When the upper soil pressure was 9.8 kN/$m^2$, the maximum load of the retaining wall fixing the front foundation shows higher values than those of others. But the total deformation is lower in the retaining wall not to fix a base section than in that to fix a base section. It is thought that the retaining wall not to fix a base section shows low value because the deformation is distributed throughout the retaining wall and it is confirmed that the soil pressure affects supporting the structure because the deformation of the retaining wall under low pressure is 3~4 fold higher than those of others. The failure mode of the retaining wall is the overturning type because the high section is deformed. Mostly, the failure mode is the separation of the header in the notched section.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1417-1423
• /
• 2011

For evaluating the effect of various organic fertilizer ratios on the Spiraea${\times}$bumalda 'Gold Mound' growth, a container green wall system experiment was conducted in a greenhouse at Konkuk university. The experimental planting grounds were prepared with different organic fertilizer ratios ($A_1L_0$, $A_8L_1$, $A_4L_1$ $A_2L_1$ and $A_1L_1$) and with drought tolerance and an ornamental value Spiraea${\times}$bumalda 'Gold Mound' was planted. The change in soil moisture contents, plant height, number of branches, number of dead leafs, number of leaf, number of shoots, length of node, length of leaf, width of leaf, root-collar caliper, chlorophyll contents and survival rate were investigated from April to Jun 2010. 1. The result of soil moisture contents was analyzed with weight unit in the container green wall system during the dry summer season. The soil moisture contents were significantly enhanced in the container green wall system in increasing order as the amount of fertilizer level increased $A_1L_1$ > $A_2L_1$ > $A_4L_1$ > $A_8L_1$ > $A_1L_0$. 2. Compared to the control treatment (amended soil with 100% + organic fertilizer 0%) application, the highest plant growth was observed in the treatment of $A_2L_1$(amended soil with 67% + organic fertilizer 13%) application. However, the differences between the organic fertilizer ratio treatments of $A_1L_1$, $A_4L_1$, $A_8L_1$, and the $A_1L_0$ organic fertilizer application were mostly not significant. 3. The survival rate increased with the increasing application of organic fertilizer, but in the control treatment (amended soil with 100% + organic fertilizer 0%) application all the plants died. Experimental results from the presented study clearly demonstrated that the organic fertilizer improved the survival rate more than the Spiraea${\times}$bumalda 'Gold Mound' growth at different levels of organic fertilizers. This strain can be utilized as a plant growth application in living wall systems during the dry summer season. Therefore, Spiraea${\times}$bumalda 'Gold Mound' is expected to be a highly valuable shrub for the green wall system if it should be considered in integration with stormwater retention or as a soil conditioner for increasing soil water contents in planting ground.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1151-1156
• /
• 2009

Unstable sustain discharges can occur at the bottom cells of the panel at high temperature. To solve this problem, the wall charge variation during an address period was investigated. A test panel of 7.5 inch XGA level was used and one green cell was measured. In order to realize operating condition equal to that of the bottom cells of 50 inch panel, the addressing stress pulses are applied. It seems that the resultant wall charge loss during address period increased with increase of stress time, temperature, pressure and Xe %. Wall charge loss increases with potential difference between scan electrode and address electrode, therefore wall charge loss can be minimized by the increase of scan voltage during address period.

• Food Science and Preservation
• /
• v.2 no.1
• /
• pp.185-193
• /
• 1995

This paper was investigated the changes of the cell wall components, enzyme activities during ripening of jujuba fruits for elucidating the softening metabolism of jujuba fruits. Firmness were decreased during ripening. Moisture content did not show any notable cahanges until ripening stage but they decreased a little In overripe jujuba fruits. Polygalacturonase activities were not detected at nature green stage and $\beta$-galactosidase activities were until turning stage. But polygalacturonase activities in ripening and overripening were 51.31 and 100.72 units/100g-fr, wt. respectively. $\beta$-galactosidase activities were 16.05 and 182.55units/100g-fr. wt. in the same stages. The content of water-soluble protein was increased in overripening. Stage the contents of cell wall and alcohol-insoluble material were. decraesed during maturation, but water-soluble material was increased. The pectin and alkali-soluble hemicellulose were increased until ripening stage, but decreased in overripe jujube fruits. The total pectin and insoluble pectin during ripening, but decreased in overripe jujuba fruits.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.931-939
• /
• 2001

The slot coupling characteristics was analysed in a radial-line slot antenna for its design. The previously proposed waveguide model with a periodic boundary condition on its narrow walls and periodically arranged slots on its wide wall was used. The magnetic field integral equation and two dyadic Green\`s functions for respective regions was derived and the method of moments was used. To maximize the efficiency of numerical analysis and to extract singularities, two different kinds of basis functions, the entire domain basis function and the sub-domain one, are used. In addition, the Ewald sum technique for the rectangular waveguide and the Shanks transform for the half space were used to accelerate the computation of the slowly convergent potential Green\`s functions. Simulation results expressed the effects of the various design parameters on the slot coupling.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.62-71
• /
• 2008

Recently, the expansion of housing developments has reduced green areas in cities. The reduction of green areas caused many negative effects on human beings. For functional improvement of ecosystem, government focuses on artificial ground greening because it gives improving microclimate and saving energy consumption. This research aims to develop the system to support decision making of greening for artificial ground greening. This system consist of rooftop greening, wall greening, and street greening system which can suggest proper type of greening and calculate the effect of the greening considering the proponents inputs. It presents social, economic, and ecological value such as cost, energy saving, and temperature reduction. As it is web-based system users can easily access with internet. This system provides automatic selection modes.As a result, with this developed web-based system, decision makers can evaluate the effect of artificial ground green easily and the support to such movement will increase.