• 한국주조공학회지
• /
• 제4권1호
• /
• pp.12-20
• /
• 1984

In order to investigate the effect of size of sand grains, bentonite content and moisture on mixing power, standard mixing power, permeability, green compressive strength and green mold hardness were measured with mixing time, and also coated layer of mixed sand with time was observed by optical microscope and scanning electron microscope. From this experiment, the results were summarized as follows. 1. Mixing power increased as size of sand grains decreased. 2. Mixing power increased gradually as bentonite content increased and in particular, increased rapidly in 7-10% bentonite. 3. Mixing power increased as moisture content decreased. 4. The mixing time required to get the optimum mixing power decreased as moisture content and grain size increased, but increased as bentonite content increased.

• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.81-86
• /
• 2020

A ceramic vacuum chamber feedthrough ceramic insulator is made of Al2O3; the manufacturing process involves filling alumina powder into a urethane mold and pressing it with a rubber press to produce a molded body. Thereafter, manufacturing is completed through primary shape processing, sintering, and secondary shape processing in the green body, which is a pressurized molding body, This work is intended to prevent defects in the first shape processing by improving the ceramic insulator in the green body, and to improve the productivity of the ceramic insulator by determining the optimal processing conditions.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.283-298
• /
• 2007

Environment-friendly composites reinforced with bagasse fiber (BF), a kind of natural fiber as the remains from squeezed sugarcane, were fabricated by injection molding and press molding. As appropriate matrices for injection molding and press molding, polypropylene (PP) and polycaprolactone-cornstarch (PCL-C) were selected, as a typical recyclable resin and biodegradable resin, respectively. The mechanical properties of BF/PP composites were investigated in view of fiber mass fraction and injection molding conditions. And the mechanical properties and the biodegradation of BF/PCL composites were also evaluated. In the case of injection molding, the flexural modulus increased with an increase in fiber mass fraction, and the mechanical properties decreased with an increase in cylinder temperature due to the thermal degradation of BF. The optimum conditions increasing the flexural properties and the impact strength were $90^{\circ}C$ mold temperature, 30 s injection interval, and in the range of 165 to $185^{\circ}C$ cylinder temperature. On the other hand, as to BF/PCL-C fully-green composites, both the flexural properties and the impact strength increased with an increase in fiber mass fraction. It is considered that the BF compressed during preparation could result in the enhancement in mechanical properties. The results of the biodegradability test showed the addition of BF caused the acceleration of weight loss, which increased further with increasing fiber content. This reveals that the addition and the quantities of BF could promote the biodegradation of fully-green composites.

• Mycobiology
• /
• 제31권3호
• /
• pp.139-144
• /
• 2003

This study was conducted to investigate physiological characteristics of Trichoderma spp. isolated from Pleurotus spp. Damage tests of Pleurotus spp. and mycotoxins tests of Trichoderma spp. were also done. The optimal growth temperature of Trichoderma spp. was $27{\sim}30^{\circ}C$. Although, T. longibrachiatum was able to grow at $37^{\circ}C$ and grew $30{\sim}40$ times faster than Pleurotus. The colony colour on PDA medium of T. cf. virens was yellowish green, T. longibrachiatum was yellow, and T. harzianum was turning to bright green. In damage tests of Pleurotus by Trichoderma, T. cf. virens caused the most severe damage to Pleurotus. T. longibrachiatum and T. harzianum caused less damage on Pleurotus but were able to cause greater damage to P. eryngii. One of the mushroom cultivars, P. ostreatus 8 was the most resistant to all Trichoderma spp.. Chitinolytic mycotoxin released by Trichoderma spp. caused 52.7% damage to Pleurotus. Mycotoxins released by T. longibrachiatum caused the greatest damaged(78.6%) on P. eryngii.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.42-48
• /
• 2012

Due to increase in demand of stable and long pipelines in natural gas industry, wide range of researches are being performed on automation welding to improved welding quality with respect to weld process parameters in real time measurement. In particular, the coupling between the pipe manufacturing process and location of the weld seam, the measured size of the gap that exists in the weld position and the weld angle depending on whether the movement of molten weld. This is due to absence of controlling welding penetration position, depending on the required size of the angle of the setting. In addition, the optimum welding conditions must be considered while selecting, the correlation between these variables and the systematic correlation has not yet been identified. Therefore, in most welded pipe root-pass weld solely depends on the experience of workers in relation to secure a stable weld quality. In this study, automation welding system is implemented to select a suitable root-pass STT (Surface Tension Transfer) welding method using the optimal welding conditions. To successfully accomplish this objective, there were various welding conditions used for welding experiment to confirm that the assessment required for construction through the pipe and automatic welding process is proposed to optimize this plan.

• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.12-22
• /
• 2005

The purpose of this study is to select suitable planting base for the mat-type rooftop greening in order to popularize rooftop greening system easily. The experiment was conducted from 2004 June to 2005 May under several conditions; 4 soil depths under mats(2cm, 5cm, 10cm, 15cm), two soil mixtures(natural soil 80%+leaf mold 20%, artificial soil) and two light conditions(full sun place, 20% shaded place). In this experiment, 3 types of mats were used ; the herbaceous plants mat(11 plants inclusive of Lotus corniculatus L., Silene armeria L.), the lawn mat with Festica arundinacea and Sedum mat with Sedum kamtschaticum, Sedum sarmentosum, Sedum oryzifolium, Sedum middendorffianum. The result is as follows; in the mat-type rooftop greening, the herbaceous plants mat, lawn mat and sedum mat are the similar number of plant and effect of greening on soil depth 2cm, 5cm and 10cm, 15cm. So suitable soil depth of rooftop greening is 10cm for the load and economical factor. Thus the mat-type rooftop greening possible planting base depth of all 13cm as soil depth 10cm and mat depth 3cm. As soil mixtures, the number and growth of plants were better mat and 'natural soil 80% +leaf mold 20%' than mat and artificial soil. In herbaceous plants mat, Silene armeria L., Dianthus chinensis, Centaurea cyanus L., Lotus corniculatus L. are survival in full sun place and Silene armeria L., Dianthus chinensis, Centaurea cyanus L. are survival in 20% shaded place. In conclusion, selection of suitable soil mixtures and plants is possible extensive management rooftop greening with effect of continuous greening. The mat-type rooftop greening are lightweight and simple preparation without management and can popularize readily.

• Journal of Welding and Joining
• /
• 제33권6호
• /
• pp.27-35
• /
• 2015

Laser welding sector in the automotive industry has been widely recognized as one of the most important bonding processes, such as parts welding. Efforts to improve productivity and weld quality have been progressing steadily. In addition, laser welding is suitable for welding process that can produce high-quality welds suitable for flexible production and small quantity batch productions. In order to ensure the rigidity of the material, high strength material are applied to more than 1 GPa class body parts and automotive bumper beams. However, not only the situation is that the trend of domestic research, but also development is based on product molding considering freedom of shape where reinforcement is applied to meet the safety regulations and high-speed crash performance, despite the use of high strength materials. The tendency for heat-affected zone (HAZ) softening phenomenon common in areas of laser welded high tensile steel welding confirmed the occurrence of weld softening effect according to the process parameters. Based on this, range of process parameters could be selected for ensuring weld quality.

• 한국수산과학회지
• /
• 제51권4호
• /
• pp.369-375
• /
• 2018

This study investigated the effects of selected seaweeds on rice koji preparation (rice inoculated with Aspergillus luchuensis) and enzyme activity. Four types of rice koji were prepared using one of three seaweeds (0.5% laver, 0.5% kelp and 0.5% green laver) or a control for 72 h. The changes in the moisture content, water activity, pH, total mold cell count, amylase and protease activities were measured. During preparation, there was no significant difference in the moisture content among the four kojis, whereas the pH in the kojis made with either laver or green laver decreased rapidly compared with the control (P<0.05). This seemed to result from the seaweeds promoting the growth of mold cells. In terms of the activities of both amylase and protease, the koji with laver was superior. Subsequently, the amylase and protease activities of the koji made with laver were evaluated at various pHs (3 to 9), temperatures ($15-55^{\circ}C$) and NaCl concentrations (0-10%). The activities of both enzymes decreased notably at pH 9 and the protease activity decreased at temperatures above $45^{\circ}C$. Although the activities of both enzymes decreased at greater than 2.5% NaCl, activity was present at 10% NaCl.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.592-600
• /
• 2012

Conventional methods for preparing ceramic bodies, such as cold isostatic pressing, gypsum-mold slip casting, and filter pressing are not completely suitable for fabricating large and thick ceramic plates owing to disadvantages of these processes, such as the high cost of the equipment, the formation of density gradients, and differential shrinkage during drying. These problems can be avoided by employing a pressure-vacuum hybrid slip casting approach that considers not only by the compression of the aqueous slip in the casting room (pressure slip casting) but also the vacuum sucking of the dispersion medium (water) around the mold (vacuum slip casting). We prepared the alumina formed bodies by means of pressure-vacuum hybrid slip casting with stepwise pressure loading up to 0.5 MPa using a slip consisting of 40 vol% solid, 0.6 wt% APC, 1 wt% PEG, and 1 wt% PVA. After drying the green body at $30^{\circ}C$ and 80% RH, the green density of the alumina bodies was about 56% RD. The sintered density of an alumina plate created by means of sintering at $1650^{\circ}C$ for 4 h exceeded 99.8%.This method enabled us to fabricate a $110{\times}110{\times}20$ mm alumina plate without cracks and with a homogeneous density, thus demonstrating the possibility of extending the method to the fabrication of other ceramic products.

• 현장농수산연구지
• /
• 제24권3호
• /
• pp.5-14
• /
• 2022

Trichoderma is known as pathogen caused serious green mold disease on commercial production. T. pleuroti and T. pleuroticola were common species in various mushroom media. Many strains of T. pleuroti, known as aggressive species causing major economic losses in Korea, showed benomyl resistance. Accurate identification and detection of Trichoderma species associated with oyster mushrooms is very important for disease control. We developed species-specific primers for T. pleuroticola, T. pleuroti, T. harzianum, and T. atroviride based on species-specific fragments isolated from amplified fragment length polymorphism analysis. PCR products corresponding to the predicted fragment of 500bp, 230bp, 180bp, and 410bp were amplified from T. pleuroticola, T. pleuroti, T. harzianum, and T. atroviride, respectively. Multiplex PCR assay using species-specific primers quickly and accurately identified and detected T. pleuroti from mushroom media in which various species co-exist. Our results can be useful for the effective control of mushroom disease.