• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.5
• /
• pp.55-64
• /
• 2015

In this study, negative air ions, which can increase comfort and positively influence human health, was set as an evaluative factor for school forests. The characteristics, location and microclimate of school forests were examined to determine an effective school forest model for maximum negative air ion generation. It also aimed to provide basic data for the development of urban green fields. The negative air ion concentrations were different according to the green types. The order from the highest to the lowest was: single-layer structure($934ea/cm^3$) > multi-layer structure($794ea/cm^3$) > grass($553ea/cm^3$) > bare ground($529ea/cm^3$). As for the correlation with microclimate, negative air ion concentration was negatively correlated with temperature. The negative air ion concentration was significantly different according to planting type. The negative air ion concentration was higher at single-layer structure sites than at multi-layer structure sites, which appears to indicate that the temperature is higher when the vegetation structure was single-layer compared to multi-layer. Wind speed was higher at the single-layer planted site than at the multi-layer planted site. The vegetation wind shielding effect was lower at single-layer planted sites than at multi-layer planted sites. The single-layer planted site provided more favorable conditions for the generation and dispersion of negative air ions.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.245-250
• /
• 1999

Plantlets derived from leaf blade-segment culture of a variegated tobacco (Nicotiana tabacum L. cv. BY-4) that was induced by a heavy-ion ($^{14}N$) beam irradiation to proembryos, were characterized. When explants from both white and green sections of leaves of the variegated plant were cultured on MS medium containing 0.1 mg/L NAA and 1.0 mg/L BAP, the white sections yielded only white shoots, whereas the green sections generated approximately 47.2% green, 37.4% white and 15.4% variegated shoots. In the F1 generation of a green tobacco derived from the leaf blade-segment culture, the segregation ratio of green to white was 1,651:54. Furthermore, reciprocal crosses showed that all of the progenies was green, indicating that the variegation is not maternally inherited. When the signal intensity of photosynthesis genes was determined by DNA gel blot analysis using the variegated leaves derived from green sections of variegated leaves, there were more of the rbcL, psbA, 16S rDNA and 23S rDNA chloroplast genes in the white sections than the chloroplast genes in wild type and green sections of the variegated plants.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.587-595
• /
• 2019

This study analyzed the influence of the environmental factor of each vegetation type in an urban, mountainous park (Tangeumdae Park in Chungju) on air ion. The measuring points were divided according to the tree species, diameter at breast height, crown density, and layered structure, and the meteorological factors and the air ion were measured. The results of the measurement showed the average generation of positive ions of $610.90{\pm}50.27ea/cm^3$, the average generation of negative ions of $723.58{\pm}64.25ea/cm^3$, and the air ion index of $1.19{\pm}0.10$. The results of the analysis, according to the vegetation type, are as follows. Firstly, the air ion varied according to the species, the chest diameter at breast height, and the layered structure, and was analyzed to be statistically significant. Secondly, the air ion and the vegetation type showed a positive correlation with the species, diameter at breast height, crown density, and layered structure. The cation showed a negative correlation with the species, diameter at breast height, and the crown density, and the anion showed a positive correlation with the species, the diameter at breast height, crown density, and layered structure. Thirdly, the ion index in ridges had a higher correlation with the vegetation type than the meteorological factors. In detail, the correlation was higher in the species > layered structure > crown density > diameter at breast height. This study had the limitation of evaluating air ions in the ridge. Therefore, future studies on air ion should consider both terrain structure and vegetation type and analyze the seasonal changes and comparison.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.168-174
• /
• 2003

The chemical compositions and antioxidant activity of green tea extracts in medilite-extraction water were compared to that of distilled water(DW). Antioxidant activity was fetermined by the formation of thiobarbituric acid reactive substances (TBARS) in rat liver homogenates and microsomes and the scavenging activity of free radicals by DPPH ($\alpha$, $\alpha$'-diphenyl-$\beta$-picrylhydrazyl). The order of total polyphenolic compounds and extracted yield by extracts was medilite 325 mesh-extraction water, medilite 600 mesh-extraction water and distilled water(DW). The ranges of scavenging activity of green tea extracts in DPPH method were 60.95% - 64.51%. The inhibition ratios of TBARS formation in the rat liver homogenates and microsomal fractions were significantly lower with green tea extracts by DW-extraction than with both medilite 325 mesh and 600 mesh-extraction water. The concentration of iron ion of water containing medilite 325 mesh and green tea extracts and of water containing medilite 600 mesh and green tea extracts were significantly higher compared to DW. Therefore, this result suggested that enhanced concentration of iron ion in green tea extracts by medilite-extraction water containing high iron ion content was associated with enhanced peroxidation of the rat liver microsomal fractions. These results showed that total polyphenolic compounds, the % of yield and mineral compounds of green tea extracts were increased using medilite 325 mesh and 600 mesh-extraction water.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.803-809
• /
• 1998

Heavy metal ions in water were removed using algal biomass as adsorbents. Absorbents were dried for 3 days, ground them by 40~60 mesh and then were swelled in a buffer solution for 1hr. After being packed in the column, commercially available standard solution of Cd(II) and Pb(II) ions were diluted to get the suitable concentration and then it was eluted with the rate of 1mι/min. Heavy metals on the adsorbents were recovered with nitric acid. More amounts of Cd(II) or Pb(II) ions in green algae, Ulva pertusa, than in brown algae, Sargassum horneri, were adsorbed. Pb(II) ion was adsorbed more than Cd(II) ion in both algae. The pH effect of adsorbed amounts of Cd(II), Pb(II) ions on the biomass was shown the following order ; pH 10.5 ＞ 8.5 ＞ 7.0 ＞ 5.5 ＞ 3.5. Recovery ratio of metal ions front algae is shown higher in acidic or neutral conditions than it in alkalic ones. Pb(II) ion is recovered relatively more than Cd(II) ion in our system.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.411-415
• /
• 1973

The reaction between cyanide ion and triphenyl methane dyes is subject to marked catalysis by cationic micelles of cetyltrimethyl ammonium bromide(CTABr) and retarded by anionic micelles of sodium lauryl sulfate(NaLS). Added salts, anions inhibit the catalysis by CTABr, and cations, especially $Zn^{++},\;Cd^{++}$ decrease the retardation of the reaction rates in the presence of NaLS. The kinetic effects of the ionic micelles are much larger in water than in ethanol-water, methanol-water, propanol-water and acetone-water, but strange solvent effects, acceleration the reaction rates, was found in the reaction with malachite green in water-methanol system.

• Journal of Powder Materials
• /
• v.19 no.1
• /
• pp.13-18
• /
• 2012

This study has been performed on the full density sintering of Fe nanopowder and the surface hardening by plasma ion nitriding. The Fe sintered part was fabricated by pressureless sintering of the Fe nanopowder at $700^{\circ}C$ in which the nanopowder agglomerates were controlled to have 0.5-5 ${\mu}m$ sized agglomerates with 150 nm Fe nanopowders. The green compact with 46% theoretical density(T.D.) showed a homogeneous microstructure with fine pores below 1 ${\mu}m$. After sintering, the powder compact underwent full densification process with above 98%T.D. and uniform nanoscale microstructure. This enhanced sintering is thought to be basically due to the homogeneous microstructure in the green compact in which the large pores are removed by wet-milling. Plasma ion nitriding of the sintered part resulted in the formation of ${\gamma}$'-$Fe_4N$ equilibrium phase with about 12 ${\mu}m$ thickness, leading to the surface hardening of the sintered Fe part. The surface hardness was remarkably increased from 176 $H_v$ for the matrix to 365 $H_v$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2041-2043
• /
• 2013

A layered perovskite of Dion-Jacobson phase, $RbLaTa_2O_7$, was successfully exfoliated into colloidal suspension via successive ion-exchange and intercalation reaction. The pristine perovskite $RbLaTa_2O_7$ was synthesized by conventional solid-state reaction, and then, it was ion-exchanged with hydrochloric acid to obtain a protonic form of perovskite. The resulting proton-exchanged perovskite was reacted with ethylamine to increase interlayer spaces for further intercalation reaction. Finally, the ethylamine-intercalated form was exfoliated into nanosheets via an intercalation of bulky organic cations (tetrabutylammonium). According to X-ray diffraction (XRD) analysis, the TBA-intercalated form showed remarkably increased interlayer spacing (${\Delta}d$ = 1.67 nm) in comparison with that of the pristine material. Transmission electron microscopic image of exfoliated perovskite clearly revealed that the present exfoliated perovskite were composed of very thin layers. This exfoliated perovskite nanosheets could be applicable as building blocks for fabricating functional nanocomposites.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.759-762
• /
• 2001

Mg$_2$SnO$_4$having an inverse spinel structure was selected as a new host material of $Mn^{2+}$ activator. The luminescence of the $Mg_2$SnO$_4$:Mn phosphor prepared by the solid-state reaction were investigated under ultraviolet and low-voltage electron excitation. The Mn-doped magnesium tin oxide exhibited strong green emission with the spectrum centered at 500nm wavelength. It was explained that the green emission in $Mg_2$SnO$_4$:Mn phosphor is due to energy transfer from $^4T_1to ^6A_1\;of\; Mn^{2+}$ ion at tetrahedral site in the spinel structure. The optimum concentration of $Mn^{2+}$/ion exhibiting maximum emission intensity by the low-voltage electron excitation was 0.6mol%. ？

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.106-109
• /
• 1999

Storage stability of the blue-green pigment, which was converted from Gardenia jasminoides yellow pigment by Staphylococcus epidermides and Gardenia jasminoides yellow pigment, were investigated at various conditions of light, temperature, inorganic ion and pH, The factors that cause the discoloration were light and temperature $(above\;40^{\circ}C)$. The effects of light and temperature on storage stability of blue-green pigment were less than those of Gardenia jasminoides yellow pigment. Also, the effect of light was decreased by using green filter. There were no significant effects of pH and inorganic ion on both pigments.