• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.116-123
• /
• 1991

Two solution to soil ratios, 2 : 1 and 5 : 1 were tested to determine the appropriate ratio in the sorption measurement off. sulfoxide for Wahiawa soil samples, 0-20 cm, 40-60 cm and 100-120 cm. and Salinas soil samples, 0-15cm and 115-130cm. One ${\mu}$ mol/L f.sulfoxide was used as an initial equilibration concentration. Sorption of f.sulfoxide at 5 : 1 ratio showed appropriate mixing, while sorption at 2 : 1 ratio indicated insufficient mixing during the various batch equilibration times (4, 12, 24 and 48 hours). For most samples the degree of sorption was about 20-50%, which falls in the desired range (20-80%) at the 5 : 1 ratio. An exception was with the low-sorptive Wahiawa subsoil in which the ranges were below 20%. Thus the 5 : 1 ratio can be used for f.sulfoxide sorption measurement. Four equilibration times (4, 12, 24 and 48 hours) and four concentrations(0.1, 1.0, 5.0 and $10{\mu}mol/L$) were used to determine the appropriate equilibration time for Wahiawa and Salinas soils. Sorption increased over all equilibration times, indicating no complete equilibrium within 48 hours. Apparent equilibrium was reached in 4 hours, and sorption increased slowly until 24 hours and faster thereafter, except for the Wahiawa soil, 100-120 cm. The recommended equilibration time is 24 hours, since it may eliminate the insufficient sorption and yet avoid undesirable transformation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.8
• /
• pp.1194-1199
• /
• 2015

Vitamin $K_1$ (phylloquinone) content of commonly consumed foods in Korea were determined by solvent extraction followed by reversed-phase liquid chromatography using post-column derivatization and fluorescence detection. Samples were obtained in the years of 2013 and 2015. In this study, 46 vegetables, 14 fruits, and 6 legumes were analyzed. Relatively higher amounts of vitamin $K_1$ were found in sweet potato leaves, green kiwi, and mung beans among vegetables, fruits, and legumes, respectively. The content of vitamin $K_1$ in vegetables including spinach, broccoli, and potato ranged from non-detectable (ND) to $1,467.3{\mu}g/100g$. The content of vitamin $K_1$ in fruits ranged from ND to $42.7{\mu}g/100g$. The content of vitamin $K_1$ in legumes, including soybeans, mung beans and peas ranged from 1.7 to $63.4{\mu}g/100g$. In addition, the analytical method validation parameters including recovery, reproducibility, repeatability, peak purity, and linearity were calculated to ensure the method's validity. The results showed high linearity with a correlation coefficient of 0.9999. Overall recovery was close to 100% (n=5). This study revealed reliable vitamin K content in commonly consumed foods in Korea for a nutritional information and food composition database.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.333-343
• /
• 2011

The yellow poplar is an appropriate species for the age of low carbon green growth, because its absorption rates of ozone is greatly excellent, and also the absorption rates of carbon dioxide causing climate changes is very remarkable. The yellow poplar, which is a kind of rapid growth tree, shows a lack of performance as a structural member, however, it is suitable to use a variety of purposes like furniture materials, interior materials, plywood materials, and so on. In this study, the structural size skin-timbers were made by using the yellow poplar, and the compressive capacity was evaluated, also the numerical model was developed for the various uses. The rectangular shape skin-timber presented a good performance by showing 56.3% residual strength about the solid material. In case of the cylinder shape skin-timber showed a possibility to use diversely as a furniture material, as well as a structural uses, because almost 50% compressive capacity of material even though its residual area rates was 25%. Both rectangular shape and the cylinder shape represented that 'Brooming or end rolling' were the major failure mode, and partly splitting failure mode. The compressive capacity of the rectangular shape which residual area rates was large was higher than the cylinder shape, but it did not show statistical significance about the compressive capacity between them. Thus, it will be possible to use them mixed for a convenience of users. The result of the numerical analysis model was quite similar to actual test of the compressive capacity. Therefore, the yellow poplar can be utilized in the development of various uses by applying numerical analysis model about a variety of shapes and dimensions.

• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.63-76
• /
• 2011

This paper studies the impact of Korean introduction of the Generalized System of Preferences(GSP) to developing countries, which are continuously arguing to support research and development for reducing greenhouse gas(GHG) emission with developed countries in the Conference of the Parties(COP) of UNFCCC. This paper is focusing on the expecting effects of trade and GHG emission reduction when Korea provides GSP to Indonesia, Brazil, and Ethiopia, which are selected in the first session of Global Green Growth Institute(GGGI). This paper uses the methodology of the intra-industry trade index multiplied by Korean import-induced coefficients. To Indonesia, Korean probable GSP would benefit exports of Indonesian agriculture, forestry, fishery, and livestock farming industries, which would contribute to Indonesian reduction of GHG emission. To Brazil, the exports to Korea would increase in the GHG sensitive industries such as metal, fat, oils, food, and beverage industries. Ethiopia belongs to the least developed countries. So Korean GSP would support the exports and GHG reduction in Ethiopian agriculture, forestry, fisheries, textiles, and leather industries. Without conflicting most favored nation treatment(MFN) principle in WTO, the introduction of GSP would be a good compensation for GHG reduction to developing countries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.610-616
• /
• 2012

All the countries in the world is currently facing the full scale of energy-climate era currently, and making strong energy policy that will lead to green growth of the future energy resources by utilizing renewable energy as the basis of entering the advanced country becomes the goal of development that satisfies the demand for energy in 21st century. Recently, ocean energy attracted the attention along with the necessity of developing renewable energy. Ocean energy is the one of most prominent recyclable and clean resources that has not been developed yet. So, it is highly required to develop good tidal current energy conversion system in coastal area. The inflow angle that acts against tidal current turbine, seabed effect and the change of efficiency along the occurrence of cavitation were investigated through the wake flow characteristics in this study. Power coefficient degradation by seabed effect did not appear in the condition of this calculation. Efficiency degradation appeared from above $10^{\circ}$ regarding inflow angle and power coefficient was calculated as lower by 7 % at $45^{\circ}$. Torque and power coefficient increased as inflow velocity rose, but power coefficient degradation appeared from above 3m/s when the cavitation happened. So, it was recognized that the larger inflow angle and occurrence of cavitation become the reason for power degradation through the flow characteristics.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.102-115
• /
• 2011

The purpose of this study is to establish the evaluation model through the systematic process of selecting the indicators and to evaluate the environmental-control function on forest using GIS in Deagu for the sustainable forest planning. The 35 indicators as basic items were selected by literature review and those were squeezed into the 29 indicators through expert brainstorming. Also, the 8 indicators to evaluate environmental-control function were selected by the first survey and the 5 final indicators such as carbon sink, temperature decrease, wind formation, water circulation, air purification were determined by MCB analysis using the second survey. The evaluation model was established through the weight of each indicator by AHP analysis using the third survey. According to the result of evaluating the environmental-control function on forest, the functions around the top area of Mt. Ap, Mt. Biseul, Mt. Palgong had more than 66 scores. On the other hand, the functions around Mt. Waryong and forest of Chilgok in Buk-gu had less than 40 scores. It is necessary to improve the function through the sustainable restoration and management in case of forest that the environmental-control function was lower. Furthermore, these results will be able to be utilized as basic data in order to establish the preservation area and control development area at the urban, environmental, and forest planning.

• Korean Journal of Environment and Ecology
• /
• v.22 no.6
• /
• pp.666-678
• /
• 2008

The needs for drawing up of biotope map is rapidly spreaded over each local government recently in Korea, according as enhancing of interest about biotope, which is recognized to practical instrument for concretely being able to considering natural environment and ecosystem on all sorts of development plan. However, there are not yet the standard suggestion on biotope types and classification systems and biotope classification criteria. Therefore, each other methodologies are applied to each of local autonomies. First, under such critical mind the biotope types and classification systems were drafted by a review on biotope types, biotope classification systems, and biotope classification criteria of the preceded case studies until now at the inside and outside of the country. And then the purpose of this study is to derive biotope types and biotope classification systems applicable to the whole Korean region through continual feed back such as field surveys in selected representative areas and consultations. As a result of reviewing the case examples, first, the biotope classification systems were mixed two steps system with three steps system and those were composed mostly of the structure of two steps: large and small. Second, land-use, soil pavement ratio, green cover ratio, and vegetation usually were applied to the biotope classification criteria. This study suggests that the biotope classification system is consisted of four steps system: large(biotope class), medium(biotope group), small(biotope type) and detail(sub-biotope type), and the biotope types are classified into 13 types of large step, 45 types of medium step and 127 types of small step. However, this study suggests that the new biotope types on small step or detail step should be continually supplemented with the foundation of classification system proposed in this study because the biotope type classification should consider regional characteristics.

• Journal of Life Science
• /
• v.26 no.4
• /
• pp.484-489
• /
• 2016

Living organisms can maintain or extend their territories by producing allelochemicals that influence the growth, survival, and reproduction of other organisms. To identify natural biostimulants of positive allelochemicals, we screened 18 common seaweed extracts for enhancement of rhizoid and blade production in a convenient Porphyra suborbiculata monospore assay. By addition of methanolic extract from the most potent green seaweed, Codium fragile, 100% and 50% enhancement doses reflecting the amount of C. fragile extract required to enhance rhizoid formation (in terms of number of spores with rhizoids per total spores tested) were approximately 100 and 50 μg/ml, respectively, in the P. suborbiculata monospore culture. The C. fragile extract quickly enhanced rhizoid formation, rhizoid numbers per rhizoid-holding spore, rhizoid length, blade formation (in number of spores with blade per total spores tested), and blade length from most monospores at early culture days. The extract enhanced rhizoid formation after 2 days of culture significantly, rhizoid numbers per rhizoid-holding spore after 3 days, rhizoid length after 3 days, blade formation after 2 days, and blade length after 1 day, respectively, from most monospores. The allelochemicals that enhanced favorite seaweed species may be efficacious for new seaweed management technologies, including the development of biostimulant agents based on natural products.

• Journal of Korean Society on Water Environment
• /
• v.34 no.1
• /
• pp.46-56
• /
• 2018

A mcyB-specific Ultra-Rapid quantitative PCR was developed for the quantitative detection of Microcystis aeruginosa, which is often a dominant species in green tide. McyB-specific UR-qPCR was optimized under extremely short times of each step in thermal cycles, based on the specific primers deduced from the mcyB in microcystin synthetase of M. aeruginosa. The M. aeruginosa strain KG07 was used as a standard for quantification, after the microscopic counting and calculation by mcyB-specific UR-qPCR. The water samples from the river water with the Microcystis outbreak were also measured by using both methods. The $1.0{\times}10^8$ molecules of mcyB-specific DNA was recognized inner 4 minutes after beginning of UR-qPCR, while $1.0{\times}10^4$ molecules of mcyB-specific templates was detected inner 7 minutes with quantitative manner. From the range of $1.0{\times}10^2$ to $1.0{\times}10^8$ initial molecules, quantification was well established based on $C_T$ using mcyB-specific UR-qPCR (Regression coefficiency, $R^2=0.9977$). Between the numbers of M. aeruginosa cell counting under microscope and calculated numbers using mcyB-specific UR-qPCR, some differences were often found. The reasons for these differences were discussed; therefore, easy compensation method was proposed that was dependent on the numbers of the cell counting. Additionally, to easily extract the genomic DNA (gDNA) from the samples, a freeze-fracturing of water-sample using liquid nitrogen was tested, by excluding the conventional gDNA extraction method. It was also verified that there were no significant differences using the UR-qPCR with both gDNAs. In conclusion, the mcyB-specific UR-qPCR that we proposed would be expected to be a useful tool for rapid quantification and easy monitoring of M. aeruginosa in environmental water.

• Composites Research
• /
• v.28 no.1
• /
• pp.22-27
• /
• 2015

Although it is important to have high strength of each of fiber and matrix, interface between fiber and matrix is most important. If NaCl water penetrates the interface, that area will be weak. So experiment about increasing interfacial strength is in process. In this study, the change of properties by mechanical, interfacial and micromechanical tests was observed after NaCl and aging treatment. The changes in mechanical properties of glass fiber were investigated using single-fiber tensile test. Interfacial properties between glass fiber and epoxy resin were evaluated using nondestructive acoustic emission (AE) and micromechanical test applied to fatigue test. Through change of fatigue properties, relative interfacial properties were evaluate. In conclusion, glass fiber diameter decreased and the reduction of mechanical and interfacial was observed with NaCl solution and aging treatment.