• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.4
• /
• pp.529-544
• /
• 2015

This study investigated consumer's fragrance preferences as well as image, color, and TPO associations with fragrance. Eight branded perfumes of four fragrance families were selected according to the top note (floral, fruity, green, and citrus) as stimuli; consequently, fragrance preferences and associations were measured. A survey that included a scent test was conducted; subsequently, 186 responses from male and female consumers in their twenties were analyzed using descriptive statistics, independent sample t-test, paired t-test, and chi-square analysis. The fruity fragrance was shown to be preferred the most. The perfume itself was associated with cool image, blue or pale tone colors, summer, and casual occasions in general, while a citrus fragrance was related to warm, winter, and deep tone colors in specific. Fragrance associations could be utilized in perfume marketing plans and activities such as advertising and packaging development.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.583-591
• /
• 2008

Recently, as a demand for the portable device is surged, there are needs to develop a new fuel cell system for replacing the conventionally used secondary battery. For this purpose, it becomes important to develop direct formic acid fuel cell (DFAFC) that uses formic acid as a fuel. The formic acid can offer typical advantages such as excellent non-toxicity of the level to be used as food additive, smaller crossover flux through electrolyte, and high reaction capability caused by high theoretical electromotive force (EMF). With the typical merits of formic acid, the efforts for optimizing reaction catalyst and cell design are being made to enhance performance and long term stability of DFAFC. As a result, to date, the DFAFC having the power density of more than $300mW/cm^2$ was developed. In this paper, basic performing theory and configuration of DFAFC are initially introduced and future opportunities of DFAFC including the development of catalyst for the anode electrode and electrolyte, and design for the optimization of cell structure are discussed.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.438-442
• /
• 2020

Studies on the recovery conditions and optimization process for valuable metal recovery through chemical treatment from detoxified asbestos-containing waste composed of calcium silicate, larnite, merwinite, and akermanite were conducted. The main components, Si, Ca, and Mg, of detoxified asbestos-containing waste (DACW) were separated and recovered in the form of SiO₂, CaSO₄, and Mg(OH)₂ compounds, respectively. Each separated component was confirmed through X-ray diffraction (XRD) and inductively coupled plasma spectrometer (ICP) analysis. The recovery conditions for each component were first treating them with an acid to separate SiO₂ and subsequently with H₂SO₄ to recover Ca in the form of sulfate, CaSO₄. The remaining Mg was recovered by precipitation with Mg(OH)₂ under strong basic conditions. This study suggested that it is possible to convert existing treatment process of asbestos waste by landfill through recovering the components into a resource-recycling green technology.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.20-30
• /
• 2007

Environmental Conservation Value Assessment Map (ECVAM) is the class map to divide the national land into conservation areas and development areas based on legal and ecological assessment criteria. It contributes to enhancements of the efficiency and the scientificity when framing a policy in various fields including the environment. However, it is impossible to understand the multiphase vegetation structure as data on judging the national forest class in ECVAM are restricted to areal information of Ecological Nature Status, Degree of Green Naturality and Forest Map. This point drops the reliability of ECVAM. Therefore we constructed vegetation information using LiDAR (Light Detection And Raging) technology. We generated Biomass Class Maps as final results of this study, to introduce the new forest assessment criterion in ECVAM that alternates or makes up for existing forest assessment criteria. And then, we compared these with Forest Map and Landsat TM NDVI image. As a result, biomass classes are generally higher than stand age classes and DBH classes of Vegetation Map, and lower than NDVI of Landsat TM image because of the difference of time on data construction. However distributions between these classes are mostly similar. Therefore we estimates that it is possible to apply the biomass item to the new forest assessment criterion of ECVAM. The introduction of the biomass in ECVAM makes it useful to detect the vegetation succession, to adjust the class of the changed zone since the production of Vegetation Map and to rectify the class error of Vegetation Map because variations on tree heights, forest area, gaps between trees, vegetation vitality and so on are acquired as interim findings in process of computing biomass.

• Research in Plant Disease
• /
• v.10 no.2
• /
• pp.121-125
• /
• 2004

An epidemic of target leaf spot of cucumber (Cucumis sativus) occurred in commercial greenhouses in Korea in 2000/2001. The early symptoms on the leaves were small brown spots with yellow halos. These lesions became irregular enlarging in diameter and eventually defoliation resulted. The causal agent was a fungus with morphological characteristics matching Corynespora cassiicola. The sequence of the ITS region of C. cassiicola CM2000-1 was identical to that of an authentic strain of Corynespora cassiicola. Optimal germination of spores and mycelial growth on plate was at 3$0^{\circ}C$. A long dew period on the leaf surface and high temperatures were the main contributing factors for disease development and the greenhouse epidemic. Artificial inoculation of the Korean isolate of C. cassiicola revealed resistance in some Korean cucumber cultivars.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.4
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.1
• /
• pp.1-11
• /
• 2016

The analysis of research trends is used to identify key subject areas, research trends over time, and new discussions in a study field. The purpose of this study is to examine the characteristics of research articles published in the area of rural planning using bibliometric methods. Research articles published in the Journal of Korean Society of Rural Planning "Rural Planning" from 1995 to 2014 were analyzed to determine the annual publications, the number of periodical contributions, the authorship patterns, and popular research subjects and keywords. The results of this study are as follows; (1) The number of research papers and authors has increased over the 20 years periods (1995-2014); (2) The most published authors are associated with the study of rural planning. Seoul National University, Rural Development Administration, and Chonnam National University have highly contributed to the paper publications; (3) The most frequent word in titles is "Rural" for the whole period from 1995 to 2014. The most frequent words are "Village" and "Planning" from 1995-2006, and "Landscape" and "Village" in 2007-2010, and "Village" and "Area" from 2011-2014; and (4) The most used keywords are "Rural amenity", "Rural village", and "Rural landscape" for all of the different time frames.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.1
• /
• pp.12-16
• /
• 2004

In this study, we have investigated the development of the crystal growth stability and reproducibility for large and high-quality DAST. DAST crystal were grown from a saturated methanol solution by a slow cooling method and DAST was synthesized by the condensation of 4-methyl-n-methyl pyridinum tosylate, which was prepared from 4-pocoline and methyl toluenesulponate and 4-N-dimethyl amino-bezaldehyde in the presence of piperidine. We had synthesized DAST crystals in dry Argon atmosphere in order to avoid the formation of hydride organge co-crystals, DAST$.$$H_2O$. Since DAST molecules crystallize in a humid atmosphere, crystal structure become centrosymmetric, and then second order NLO (nonlinear optical) properties would be disappeared. We fixed the growth orientation of DAST crystal (001) surface. The crystal growth was proceeded at a cooling rate of $H_2O$/day and the cooling period is for 4 days. The dimensions of seed crystal was $2.5\times 3.6\times0.4\textrm{mm}^3$ and we have obtained a DAST crystal with the dimension of $10\times 10.5\times3.0\textrm{mm}^3$. The color of grown DAST crystal is red and it's surface appears to be metallic green.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.61-71
• /
• 1995

From Salix maximowiczii of the Korean Salix, morphological and palynological characters were investigated by stereoscopic, light, and scanning electron microscopes. Also, this study was eonducted to investigate the effect of meteorological factors on the disjunct distribution in Salix maximowiczii forests grown within the restricted region. 1. Morphological characters of S. maximowiczii clarified with the descriptions and figures. 2. The palynological description was made to the S. maximowiczii and identified distinctly species. 3. S. maximowiczii is distributed only in Baekdam and Hangyeryong valley of Mt. Sorak in Kangwon-do, and valley of height region in Kyeongseong-gun (Hamgyongbuk-do), Sinhueng-gun, and Pungsan-gun (Hamgyongnam-do) in North Korea. 4. Water factors was better than temperature factors in the influence of meteorological factors for disjunct distribution. 5. These ecological and taxonomical informations could be used in practical application for silvicultural prescription, such as erosion control forest, timber production, and development of green area in river bank.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.40-49
• /
• 1995

This study was carried out to investigated the developmental characteristics and spatial distribution of mango shield scale, Protopulvinaria mangiferae injuring to Elaeocarpus sylvestris(Lour.) This mango shield scale is parthenogentic. The oviparous female have three larval stages and adult. This species has two generation a year. The crawlers of the 1st generation emerged from late may to middle July, and those of the 2nd generation from early August to early October. Their emergence reached its peak in early part of the occurrence period. The crawlers disperse from 10 to 14 o'clock from ventral side of the adult and more than 90% had settled with in 8 hours on the leaves of E. sylvestris. The larvae and adults were distributed contagiously between trees. The adult densities were higher in the lower part of the crown than those in the middle or upper parts. But differents in densities were not significant among four directions. The distribution of the adult scales per leaf cluster showed an aggregation with a slightly colonized pattern.