• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.294-294
• /
• 2022

In 2013, the Asian Development Bank classified the Philippines among the countries facing high food security risks. Evidence has suggested that climate change has affected agricultural productivity, and the effect of extreme climatic events notably drought has worsened each year. This had resulted in serious hydrological repercussions by limiting the timely water availability for the agriculture sector. Laguna is the 3^rd most populated province in the country, and it serves as one of the food baskets that feed the region and nearby provinces. In addition to climate change, population growth, rapid industrialization, and urban encroachment are also straining the delicate balance between water demand and supply. Studies have projected that the province will experience less rainfall and an increase in temperature, which could simultaneously affect water availability and crop yield. Hence, understanding the composite threat of climate change for crop yield and water consumption is imperative to devise mitigation plans and judicious use of water resources. The water footprint concept elaborates the water used per unit of crop yield production and it can approximate the dual impacts of climate change on water and agricultural production. In this study, the water footprint (WF) of six main crops produced in Laguna were estimated during 2010-2020 by following the methodology proposed by the Water Footprint Network. The result of this work gives importance to WF studies in a local setting which can be used as a comparison between different provinces as well as a piece of vital information to guide policy makers to adopt plans for crop-related use of water and food security in the Philippines.

• Clean Technology
• /
• v.16 no.1
• /
• pp.33-38
• /
• 2010

The characteristics of desorption reaction and the heating values of used activated carbons collected from the companies of Shiwha/Banwal industrial complex were investigated. The desorption characteristics of used activated carbons were analyzed based on the data obtained from a thermogravimetric analyzer. The activation energies and reaction orders for desorption reaction of used activated carbons were calculated by employing Freeman-Carroll method. Heating values of volatile organic compounds(VOC) desorbed from used activated carbons were estimated based on the data obtained from a total hydrocarbon analyzer. It was found that the reaction orders of desorption of used activated carbons were 0.1~0.8, their desorption activation energies, 6.9~26.4 kJ/mol, and VOC heating values, 0.4~10.7 kcal/kg.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.261-272
• /
• 2023

This research concentrates on the potential explosion hazards that could arise from unforeseen accidents in the rapidly proliferating hydrogen refueling stations and Energy Storage System(ESS) facilities. It underscores the pivotal role of structural protection technology in alleviating such risks. The research contributes primary data for the formulation of structure protection design by assessing the impact resistance across various reinforcement techniques used in cement composites. The experimental results elucidate that reinforced concrete, serving as the quintessential structural material, exhibits a 20% advancement in impact resistance in comparison to its non-reinforced counterpart. In situations typified by rapid loads, such as those seen with high-velocity impacts, the reinforcement of the matrix with fibers is demonstrably more beneficial than local reinforcement. These insights accentuate the importance of judiciously choosing the reinforcement method to augment impact resistance in structural design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.150-152
• /
• 2021

For the development of a resource recycling society, it is important to control the generation of waste in all processes such as production, distribution, consumption and disposal, and to recycle the recyclable resources of waste instead of simply landfilling and incineration. However, in order to develop a resource-recycling society, not only emitters, businesses, and the central government, but also local governments need to work together to find a solution. Therefore, in this study, we present a promotion strategy for the development of Sejong City's resource-recycling society, taking into consideration the current situation of Sejong City as well as changes in the government's institution system. We suggest that regionally preparing recycling priority management plan, maximizing waste resource utilization, establishing recycling industry activation plan, and building a systematic and efficient recycling platform, etc.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.41-47
• /
• 2008

Survey on the food intake status and health condition of the elerly over 65 years old living in Damyang Jeonnam was performed and meal menus for the pavillion were developed using local products. Allowance of the elderly less than 100,000 won was 45%. The local products of the area recognized by the elderly were bamboo shoot (30%) > bamboo (22.5%) > bamboo basket (12.5%) > do not know (15%) > green tea (10%) > rice(7.5%) > vegetable. In dental health, 52.5% of them had bad condition but 62.5% did not use denture at all. The most favorate foods were Korean (92.5%) and Chinese and Japanese were favored by 5%, and 2.5%, respectively. In percentage of eat-out and use of instant foods, 42.5% of them answered that eating-out chances were very rare and 62.5% answered that they do not use instant foods at all. Potassium intakes for the male and female elderly were significantly very low with values of 2579.2 mg and 2601 mg, respectively (p < 0.05). Calorie intakes for men were 1678.5 kcal, which was only 84% of RI and 1470.8 kcal for women (92%). Shortages of nutrition including calcium intake and others were very serious and the meal was not nutritionally balanced based upon the study of GMDFO. The menu for the elderly in busy farming season of the area were developed with the use of local products and the information from the study.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.9
• /
• pp.1179-1188
• /
• 2023

Escherichia coli, particularly multidrug-resistant (MDR) strains, is a serious cause of healthcare-associated infections. Development of novel antimicrobial agents or restoration of drug efficiency is required to treat MDR bacteria, and the use of natural products to solve this problem is promising. We investigated the antimicrobial activity of dried green coffee (DGC) beans, coffee pulp (CP), and arabica leaf (AL) crude extracts against 28 isolated MDR E. coli strains and restoration of ampicillin (AMP) efficiency with a combination test. DGC, CP, and AL extracts were effective against all 28 strains, with a minimum inhibitory concentration (MIC) of 12.5-50 mg/ml and minimum bactericidal concentration of 25-100 mg/ml. The CP-AMP combination was more effective than CP or AMP alone, with a fractional inhibitory concentration index value of 0.01. In the combination, the MIC of CP was 0.2 mg/ml (compared to 25 mg/ml of CP alone) and that of AMP was 0.1 mg/ml (compared to 50 mg/ml of AMP alone), or a 125-fold and 500-fold reduction, respectively, against 13-drug resistant MDR E. coli strains. Time-kill kinetics showed that the bactericidal effect of the CP-AMP combination occurred within 3 h through disruption of membrane permeability and biofilm eradication, as verified by scanning electron microscopy. This is the first report indicating that CP-AMP combination therapy could be employed to treat MDR E. coli by repurposing AMP.

• Applied Chemistry for Engineering
• /
• v.34 no.6
• /
• pp.567-575
• /
• 2023

Water electrolysis is undergoing active research as one of the promising technologies for producing effective green hydrogen. Using seawater directly as a raw material for a water electrolysis system can solve the problem of the limitations of existing freshwater raw materials, as seawater accounts for approximately 97% of the water on Earth. At the same time, abundant by-product materials can be obtained, representative examples of which are Cl₂, ClO^-, Br₂, and Mg(OH)₂ produced during electrolysis, depending on their composition and pH environment. In order to develop a successful seawater electrolysis system and oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) catalysts, it is necessary to understand the causes and consequences of reactions that occur in the seawater environment. Therefore, in this paper, we will investigate the reaction mechanism and characteristics of the seawater electrolysis system as well as the research and development trends of electrochemical catalysts used in anode and cathode electrodes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.1
• /
• pp.17-31
• /
• 2024

The purpose of this study is to propose a modern use of traditional culture by developing creative fashion designs that combine modern and traditional styles based on an analysis of traditional costumes of women in the Tang Dynasty of China. The characteristics of the Tang Dynasty women's costume are as follows. The Tang Dynasty women's costume consists of a short coat (衫, Shan), skirt (裙, Qun), half-arm shawl (半臂, Banbi), and short embroidered cape (帔, Pei). The colors are succinct and elegant, commonly red, yellow, green and navy blue in its entirety. It may be classified by pattern that blend plant patterns, animal patterns, geometric patterns, and two or more mixed patterns. On the basis of the characteristics for traditional women's costume during the Tang Dynasty, the CLO 3D program is employed to develop digital fashion design for four pairs of 3D digital clothing and the production of two pairs of work product. The results are as follows. First, the development of fashion design reflecting the design characteristics of traditional women's clothing in the Tang Dynasty of China could be expressed as fashion design reflecting unique values while connecting tradition and modernity. Second, the 3D virtual clothing program displays an extremely important effect in design deployment and pattern arrangement by having efficiency and convenience in clothing production. The CLO 3D program is closely combined with the 2D design and 3D effect and heightened efficiency while being appropriate to realize sustainability while saving processing time and energy for the sample products. Third, the production of an actual product by facilitating the 3D virtual clothing design may lead to time savings and an effective economy and may allow for the comparison of digital fashion design and actual products as well as confirming the effects of digital fashion design.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.1
• /
• pp.96-110
• /
• 2024

Polymer electrolyte membrane fuel cells (PEMFCs) are green energy conversion devices, for which commercial markets have been established, owing to their application in fuel cell vehicles (FCVs). Development of cathode electrocatalysts, replacing commercial Pt/C, plays a crucial role in factors such as cost reduction, high performance, and durability in FCVs. PtNi octahedral catalysts are promising for oxygen reduction reactions owing to their significantly higher mass activity (10-15 times) than that of Pt/C; however, their application in membrane electrode assemblies (MEAs) is challenged by their low stability. To overcome this durability issue, various approaches, such as third-metal doping, composition control, halide treatment, formation of a Pt layer, annealing treatment, and size control, have been explored and have shown promising improvements in stability in rotating disk electrode (RDE) testing. In this review, we aimed to compare the features of each strategy in terms of enhancing stability by introducing a stability improvement factor for a direct and reasonable comparison. The limitations of each strategy for enhancing stability of PtNi octahedral are also described. This review can serve as a valuable guide for the development of strategies to enhance the durability of octahedral PtNi.

• Journal of the Korean Society for information Management
• /
• v.41 no.3
• /
• pp.359-380
• /
• 2024

This study discusses the current state and challenges of global scholarly communication and the internationalization of scholarly journals. This study defines journal internationalization from the viewpoint of global scholarly communication and examines how the pursuit of knowledge universality, inclusiveness, and bibliodiversity, as well as scholar-led global scholarly communication, are being impeded. It proposes no-fee OA and repository-based OA journal publishing models and the development of multilingual scholarly information systems as a means to foster healthy global scholarly communication. Additionally, the study discusses the significance of international and national support and policy development, the roles of university libraries and library consortia, and the awareness of researchers, universities, and learned societies in promoting global scholarly communication.