• Journal of Environmental Science International
• /
• v.24 no.10
• /
• pp.1239-1251
• /
• 2015

Impervious areas have been expanded by urbanization and the natural structure of water circulation has been destroyed. The limits of centralized management for controlling storm water runoff in urban areas have been suggested. Low impact development (LID) technologies have been promoted as a crucial alternative, establishing a connection with city development plans to build green infrastructures in environmentally friendly cities. Thus, the improvement of water circulation and the control of nonpoint source were simulated through XP-SWMM (storm water and wastewater management model for experts) in this study. The application of multiple LID combination practices with permeable pavements, bioretention cells, and gutter filters were observed as reducing the highest runoff volume by up to 70%. The results from four different LID installation scenarios indicated that permeable paving is the most effective method for reducing storm water runoff. The rate of storm water runoff volume reduced as the rainfall duration extended. Based on the simulation results, each LID facility was designed and constructed in the target area. The LID practices in an urban area enable future studies of the analysis of the criteria, suitable capacity, and cost-efficiency, and proper management methods of various LID techniques.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.187-191
• /
• 2003

The motion and time-mean drift force of a 2-D floating BBDB in waves are studied with and without taking account of fluctuating air pressure in the air chamber. It has been found numerically that the drift for a of the BBDB is in the reverse direction of propagation of the incident waves over specific frequency ranges as found by McCormick through his experiment work. The drift force is calculated by Pinkster's near-field method. Since Maruo's formula method for the drift force is always positive, Maruo's formula is only approximate and should be replaced by the correct near-field method.

• Journal of Fashion Business
• /
• v.2 no.1
• /
• pp.12-24
• /
• 1998

The purpose of this study is to investigate the efficiency of systematic color combination for apparel and textile design. We planned the new color systems, HUE AND TONE COLOR SYSTEM 277 and HUE AND TONE COLOR SYSTEM 253 USED KOREAN TRADITIONAL COLORS. In order to emprove the efficiency, this study aims to explore the development of systematic color combination by computer graphics. With this purpose, this study progressed in the following order and we obtained these results. 1. First, we considered the possibility of the development of the systematic color combination used the new color system, HUE AND TONE COLOR SYSTEM 277. We considered the possibility of the development of the systematic color combination by graphic computer SDS-480. Through the experimental regulation of the RGB (Red, Green, Blue) and HLS (Hue, Lightness, Saturation) we obtained an approximation of the colors of the HUE AND TONE COLOR SYSTEM 277 on the CRT display of SDS-480. 2. We planned the new color system, HUE AND TONE COLOR SYSTEM 253 USED KOREAN TRADITIONAL COLORS for systematic color combination. 3. In a practical application, we tried five principal types of color combination in apparel and textile design, monochromatic combination, tone on tone combination, moderate combination, tonal combination, and contrast combination. 4. Furthermore, we applied the systematic color combination for the textile patterns by tone on tone combination. By using the systematic color combination for apparel and textile design, we realized the efficiency and utility of the systematic color combination.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.486-493
• /
• 2010

Recently, it has been a worldwide issue to develop offshore wind farm based on the past technical experiences of onshore wind turbine installation. In Korea, the government has the wind-energy to be a new-sustainable field of development to bring green-growth in near future and put political and fiscal efforts to support the academic and industrial technical development. Especially, there are much advancement for the fields of turbine, blade, bearing, grid connection, ETC. Correspondingly, technical needs do exist for the offshore foundation installation techniques in geotechnical point of view. Within few years, 2~5MW offshore wind turbines will be constructed at about 30m water depth and it is known that monopiles of D=4~6m are suitable types of foundation. In order to construct offshore wind-turbine foundation, technical developments for drilling machine, design manual, monitoring&maintenance technique are required. This paper presents technical issues with related to offshore wind farm and large diameter monopile in the point of renewable energy development.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.6-10
• /
• 2004

The magnetic polishing is the useful method to finish using magnetic power of magnet. This method is one of precision polishing techniques and has an aim of the clean technology using for the pure of gas and inside of the clean pipe for transportation. The magnetic abrasive polishing method is not so common for machine that it tis not spreaded widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. Therefore, in ths paper deals with development of the magnetic abrasive using sludge. In this development, abrasive grain WA and GC used to resin bond fabricated low temperature. And magnetic material was fabricated from the sludge which were crused into 200 mesh and average diameter ${\o}$1.2mm ball type. The XRD analysis result show that only WA and GC abrasive and sludge crystal peaks detected which explains resin bond was not any more chemical reaction. From SEM analysis it tis found that WA and GC abrasive and sludge were stron bonding with each other by bond.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.2 s.31
• /
• pp.75-85
• /
• 2006

The study aims to explore the situation of allotment garden and its implication from case study on the Kleingarten in German the Dacha in Russia and the Civic Garden in Japan. It has shown that the allotment gardens have gradually been an important for urban people to have recreation and health from agricultural activities. The results suggest that whereas most of kind of allotment gardens in three countries was perspectively enhanced according to their historic and social contexts, the basic rationales initiated were to provide recreation areas for supporting people health and preserving green areas in urban areas. To expand these kind of allotment gardens, we conclude that the establishment and amendment of the related law are needed to activate and enhance the allotment garden in Korea.

• Journal of Environmental Impact Assessment
• /
• v.18 no.3
• /
• pp.161-170
• /
• 2009

As urban growth continues, the earth ecosystem is increasingly dependent on the patterns of urban growth. The impact intensity from urban growth is expected to change predictably with distance from the urban center. However we can't fully understand yet how urban development pattern affects urban ecosystem. In researches about urban ecosystem, it is important to relate the spatial pattern of urbanization to ecological processes. So we used gradient analysis with time data; 1980's, 1990's and 2000's. We attempted to quantify the urban spatiotemporal impacts in Daejeon-city and Cheonan-city, Korea, along a 75km long and 3km wide transect. Through the results, we found the impacts range of urbanization with urban development process of two cities. When the urban growth was concentrated on in both cities, the impacts intensity and range were much stronger and wider. As a result, in urban planning or green space planning, we have to consider suitable urban development forms with surrounding areas, and make legal clauses which limits landuse change. This quantifying the urban gradient is an important step in understanding urban ecology.

• Journal of Distribution Science
• /
• v.16 no.4
• /
• pp.5-15
• /
• 2018

Purpose - This study aims to identify of prospective areas for the formation of information and high technology clusters, and propose the new distribution of Kazakhstan's regions according to the innovative development and the ability to perceive IT products. Research design, data, and methodology - The application of scientific methods in this research will allow to systematize the available data, from both a theoretical and empirical perspective. In addition, the authors proposed methodological approaches, which have a three-tiered gradation: macro-level, meso-level and micro-level. Results - This study confirms the importance of using of proposed methods and its application for real data in order to the formation of IT and high technology clusters. Further, the obtained results allowed identifying of the distribution of Kazakhstan's regions by innovative development and specialization with using of HHI indexes. Conclusions - According to the results of this theoretical and empirical study proved that distribution of the regions of Kazakhstan and results of HHI indexes shows the power of the agglomeration effect. In addition, according to the conducted survey, we conclude that in Kazakhstan there are sufficient organizational and economic opportunities, trends and conditions for the formation of IT and high technology clusters.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.136-137
• /
• 2002

We have been researching upgrade version of a stereotactic whole body frame, used for evaluating daily setup accuracy of the patient positioning during fractionated extra-cranial stereotactic radiotherapy. Currently, we are focusing on the development of a new stereotactic whole body frame, and then will handle organ movement produced by breathing at the next stage. MeV-Green is chosen for the best immobilizer possible and the epoxy board is for the frame with the dimension of 110 em in length, 50 cm in width in order to maximize transmission rate of the beam from lateral or posterior direction and to fit CT and PET scanners with an aperture of 55 cm at least. The key point of an upgraded stereotactic whole body frame will be set on the collision-free rotation of the gantry with the frame, and the development of the checking structure for the daily patient repositioning regarding internal target.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.627-632
• /
• 2010

Recently the research for lightening the railway vehicle is actively made according to the demand of the environment-friendly technology development contributing to the energy cost reduction and the green growth. The railway vehicle lightweight research is expanded to the load-supporting first structure from the secondary structure which doesn't support the load. After the composite car body development used in the Korean tilting train is completed, the composite bogie frame development in which the weight reduction efficiency is large is progressed. In this paper, distributed strain was monitored when the train load was added to the central part of the composite bogie side-frame. By using the optical fiber which was attached to the lower part of the side-frame and the developed Brillouin correlation domain analysis (BOCDA) system, the strain distribution could be measured with 3cm step over 3m section. This strain distribution was compared with the design value by the FE analysis when the load of 14ton and 18ton added. This experiment can verify the manufactured composite bogie side-frame.