• 한국잡초학회지
• /
• 제31권3호
• /
• pp.240-249
• /
• 2011

식물 유래 naphthoquinone계 juglone의 신규 제초제 작용점 KAPAS에 대한 in vitro 및 in vivo에서의 활성 평가를 통해 천연물 유래 제초제로서의 가능을 검토하였다. Juglone은 농도의존적인 반응으로 KAPAS를 효과적으로 저해하였으며, 50% 저해농도는 $9.5{\mu}M$이었다. 바랭이(Digitaria sanquinalis)에 대한 경엽처리에서 juglone 125, 250, 500 및 $1000{\mu}g\;mL^{-1}$ 농도에서의 활성정도는 각각 70, 95, 100 및 100%이었다. 또한, 8종의 화본과 및 광엽잡초에 대한 juglone 2,000 및 $1000{\mu}g\;mL^{-1}$ 농도에서의 살초력은 완전하였으며(100%), $500{\mu}g\;mL^{-1}$에서도 90~100%이었다. Juglone을 처리했을 때 나타나는 주요 증상은 고사(desiccation) 또는화염상(burndown)이었다. Juglone 처리에 의한 전해물질 누출은 광조건에 관계없이 농도의존적으로 일어났으나, 엽록소 함량 감소 정도는 광조건에서도 경미한 수준이었으며, 암 조건에서는 전혀 일어나지 않았다. Juglone에 의해 억제되었던 애기장대 종자의 발아율은 biotin 공급에 의해 뚜렷하게 회복되었다. 이상의 실험에 결과에 의하면 천연 naphthoquinone계 juglone은 신규 제초제 작용점 KAPAS를 효과적으로 저해하는 친환경적인 천연물 유래 제초제로서의 가능성을 확인하였다.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1659-1664
• /
• 2014

A porous metal-organic framework (MOF), MIL-101, was synthesized in the presence of sulfated zirconia (SZ) to produce acidic SZ/MIL-101 composites for the first time. The composites were characterized with XRD, nitrogen adsorption, FT-IR, scanning electron microscope, chemical analysis and so on. The composites (SZ/MIL-101s) were successfully applied in a liquid-phase esterification for a high yield of ester. This catalytic result of SZ/MIL-101, compared with that of pure SZ or MIL-101 (showing a negligible yield of ester), suggests that the SZ in the composite is highly active in the acid catalysis probably because of the well-dispersed active species of SZ. Moreover, the esterification is catalyzed in heterogeneous mode as confirmed by negligible esterification after filtration of the catalyst. Finally, microwaves can be efficiently applied both in the synthesis of the composites and the esterification reaction to accelerate the two processes of synthesis and esterification by about 5 times.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2359-2362
• /
• 2007

MALDI-TOF-MS technique was applied to obtain structural and compositional information of synthetic polyamides, Nylon6 and Nylon66. Mass spectra of both the original and the hydrolyzed polyamide samples were analyzed using the self calibration method as well as the internal calibration method with the standard materials of known masses. The MALDI-TOF mass spectra of Nylon6 samples showed the presence of protonated, sodiated, and potassiated ions that were assigned to cyclic and NH2/COOH terminated linear oligomers. From the MALDI-TOF mass spectra of Nylon66 samples, the potassiated linear oligomers with three different end groups are identified as well as the cyclic oligomers, i.e., NH2/COOH terminated oligomers, NH2/NH2 terminated oligomers, and COOH/COOH terminated oligomers. Full characterization of the molecular species and end groups present in the polyamide samples has been achieved, and also the changes in mass spectral patterns after the hydrolysis of the samples are presented.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3405-3410
• /
• 2011

We have investigated the cytotoxic potential of tellurium (Te) nanowires in BALB/3T3 fibroblast cells. Te nanowires were synthesized through an aqueous phase surfactant assisted method. Toxicological experiments, such as analysis of morphological changes, MTT assay, DAPI staining, and estimation of intracellular reactive oxygen species, were carried out to reveal the cytotoxic effects of Te nanowires. Te nanowires were found to be cytotoxic at all concentrations tested, in a dose-dependent manner. The UV/Vis spectra of Te nanowires suspended in a culture medium showed drastic changes and disappearance of two broad absorption peaks. The physicochemical properties such as, surface charge, size, and shape of Te nanowires were found to be altered during exposure of cells, due to the instability and agglomeration of nanowires in the culture medium. These results suggest that the chemical components of the DMEM medium significantly affect the stability of Te nanowires. In addition, TEM images revealed that necrosis was the basic pattern of cell death, which might stem from the formation of toxic moieties of tellurium, released from nanowire structures, in the bioenvironment. These observations thus suggest that Te nanomaterials may pose potential risks to environmental and human health.

• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.116-123
• /
• 2011

Herein, a novel preparation method of highly homogeneous carbon-silicon composite materials was presented. In contrast to conventional solvent evaporation method, a milled silicon-graphite or its oxidized material were directly reacted with petroleum-derived pitch precursor. After thermal reaction under high pressure, pitch-graphite-silicon composite was prepared. Carbon-graphite-silicon composite were prepared by an air-oxidization and following carbonization. From energy dispersive spectroscopy, it was observed that small Si particles were highly embedded within carbon, which was confirmed by disappearance of Si peaks in Raman spectra. Furthermore, X-ray diffraction and Raman spectra revealed that carbon crystallinity decreased when the strongly oxidized silicon-graphite was added, which was probably due to oxygen-induced cross-linking. From the anode application in lithium ion batteries, carbon-graphite-silicon composite anode displayed a high capacity ($565\;mAh\;g^{-1}$), a good initial efficiency (68%) and an good cyclability (88% retention at 50 cycles), which were attributed to the high dispersion of Si particles within cabon. In case of the strongly oxidized silicongraphite addtion, a decrease of reversible capacity was observed due to its low crystallinity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.200-200
• /
• 2011

Hierarchical mesoporous ZSM-5 with enhanced mesoporosity was synthesized by microwave through the rapid assembly via ionic interaction between sulfonic acid functionalized ZSM-5 nano particles and cationic surfactant. The catalytic performance of enhanced accessibility due to mesoporosity and acidity were investigated in the alkylation of mesitylene with benzyl alcohol as alkylating agent. The effect of mole ratio of aromatic with benzyl alcohol, reaction time and alkylation agent were also studied. The enhanced mesoporosity and acidity of sulfonic acid functionalized mesoporous ZSM-5 induced activity enhancement compared with non-functionalized mesoporous ZSM-5, sulfonic functionalized mesoporous ZSM-5 synthesized by hydrothermal method and conventional microporous ZSM-5. The sulfonic acid functionalized mesoporous ZSM-5 showed much higher chemoselectivity of benzylated mesitylene than others, whereas the others mainly show dibenzyl ether as product. This significant difference in catalytic selectivity was resulted from the existence of mesopores, which definitely allowed the benzylation in mesopores.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1161-1166
• /
• 2022

Green pitch coke with an average particle size of 2 mm was adopted as densifier and added to the raw materials of conventional A3-3 matrix graphite (MG) to prepare modified A3-3 matrix graphite (MMG) by the quasi-isostatic molding method. The structure, mechanical and thermal properties were assessed. Compared with MG, MMG had a more compact structure, and exhibited improved properties of higher mechanical strength, higher thermal conductivity and better molten salt barrier performance. Notably, under the same infiltration pressure of 5 atm, the fluoride salt occupation of MMG was only 0.26 wt%, whereas it was 15.82 wt% for MG. The densification effect of green pitch coke endowed MMG with improved properties for potential use in the spherical fuel elements of molten salt reactor.

• 분석과학
• /
• 제35권4호
• /
• pp.153-160
• /
• 2022

A green spectrophotometric method for the determination of cyanide has been proposed using, a green reagent, aqueous extract of blue butterfly pea. The test tube was filled with anthocyanin rich extract (pH 6) and cyanide solution. The reaction was kept constant for 10 minutes at room temperature. The reaction mixture changed color from blue to green as the amount of CN-ions increased. The 620 nm peak intensity increased with CN concentration. Therefore, this wavelength was used for all cyanide analyses. The cyanide calibration curve had a linear range of 0.25-1.00, 1.00-4.00, and 4.00-10.00 mg/L, with a satisfactory correlation coefficient of 0.99 and a LOD of 0.57 mg/L. The recovery ranged from 8.33 to 76.94 percent, indicating that this method is inaccurate at low cyanide concentrations. The intra-day and intermediate precision relative deviations were 0.391-0.871 % and 1.112-1.583 %. An H-bond forms between the C-4 group of the B-carbonyl ring and the HCN molecule according to the B3LYP/TZVP calculation. The method is convenient for cyanide concentrations above the LOQ of 1.09 mg/L, cost-effective, and capable of reducing toxic solvents with acceptable precision. The method could also be used to detect total cyanide in biological, environmental, and industrial waste samples.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2044-2050
• /
• 2013

A series of poly(glycerol-succinic acid) dithiocarbamate and 1,3,4-thiadiazole dendrimers, which have potential as anti-wear oil additives, were synthesized. Their anti-wear properties in three different oils (100N, DB-51, and soybean) were evaluated using a four-ball wear tester. The results indicated that thiocarbamate dendrimers have moderate anti-wear properties in DB-51 oil, and 1,3,4-thiadiazole dendrimers exhibited good anti-wear properties in 100N and DB-51 oils. However, dithiocarbamate and 1,3,4-thiadiazole dendrimers were not effective anti-wear additives in soybean oil.