• Advances in environmental research
• /
• v.2 no.4
• /
• pp.279-290
• /
• 2013

In this study, a comprehensive model developed to estimate greenhouse gas (GHG) emissions from urban area with low impact development (LID) and its integrated management practices (IMPs). The model was applied to the actual urban area in Asan Tangjeong district (ATD) as a case study. A rainwater tank (1200 ton) among various LID IMPs generated the highest amount of GHG emissions ($3.77{\times}10^5kgCO_2eq$) and led to the utmost reducing effect ($1.49{\times}10^3kgCO_2eq/year$). In the urban area with LID IMPs, annually $1.95{\times}104kgCO_2eq$ of avoided GHG emissions were generated by a reducing effect (e.g., tap water substitution and vegetation $CO_2$ absorption) for a payback period of 162 years. A sensitivity analysis was carried out to quantitatively evaluate the significance of the factors on the overall GHG emissions in ATD, and suggested to plant alternative vegetation on LID IMPs.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1569-1574
• /
• 2005

To develop new hole-blocking materials for phosphorescent organic light-emitting diodes (PhOLEDs), 5,6-dihydro-2,9-diisopropyl-4,7-diphenyl[1,10]phenanthroline (1) and 5,6-dihydro-2,9-diisopropyl-4-(4-methoxyphenyl)-7-phenyl[1,10]phenanthroline (2) were synthesized. While the absorption spectrum of 1 is very similar to that of 2, the photoluminescence spectrum of 1 has the feature of the narrower and blue-shifted blueviolet emission at the peak of 356 nm compared to that of 2. The HOMO and LUMO energy levels of 1 and 2 were estimated from the measurement of cyclic voltammetry, and 1 has the appropriate levels for a holeblocking layer (HBL). The use of 1 as a HBL in a green PhOLED led to good efficiency of 23.6 cd/A at 4.4 mA/$cm^2$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.21.2-21.2
• /
• 2009

발광다이오드는 에너지 변환 효율이 높고 친환경적인 장점으로 인하여 차세대 조명용 광원으로 각광받고 있다. 하지만 현재 발광다이오드는 낮은 광추출효율로 인하여 미래의 수요를 충족시킬 수 있을 만큼 충분한 성능의 효율을 나타내지 못하고 있다. 발광다이오드의 낮은 광추출효율은 반도체소재와 외부 공기와의 큰 굴절률 차이로 인하여 발생하는 전반사 현상에 기인한 것으로 이 문제를 해결하기 위하여 발광다이오드 소자의 발광면 및 기판을 텍스처링하는 방법이 중요하게 인식되고 있다. 하지만 현재까지 패턴의 구조에 따른 광추출 특성을 분석한 연구는 미진한 상황이다. 본 연구에서는 임프린팅 및 건식식각 공정을 이용하여 다양한 구조의 나노 및 micron 급 패턴을 발광다이오드의 p-GaN층에 형성하였다. 발광다이오드 기판 위에 하드마스크로 사용하기 위한 SiO2를 50nm 증착한 후 그 위에 UV 임프린팅 공정을 진행하여 폴리머 패턴을 형성시켰다. 임프린팅 공정으로 형성된 폴리머 패턴을 CF4CHF3 플라즈마를 이용하여 SiO2를 건식식각하였고, 이후에 SiCl4와 Ar 플라즈마를 이용한 ICP 식각 공정을 진행하여 p-GaN층을 100nm 식각하였다. 마지막으로 BOE를 이용한 습식식각 공정으로 p-GaN층에 남아있는 SiO2층을 제거하여 p-GaN층에 sub-micron에서 micron급의 홀 패턴을 형성하였다. Photoluminescence(PL) 측정을 통해서 발광다이오드 소자에 형성된 패턴의 구조에 따른 광추출 특성을 분석하였다.

• Proceedings of the Microbiological Society of Korea Conference
• /
• 2000.10a
• /
• pp.15-23
• /
• 2000

The subcellular localization of the SopB protein, which is encoded by the Escherichia coli F plasmid and is involved in the partition of the single-copy plasmid, was directly visualized through the expression of the protein fused to the jellyfish green fluorescent protein (GFP). The fusion protein was found to localize to positions close but not at the poles of exponentially growing cells. Examination of derivatives of the fusion protein lacking various regions of SopB suggests that the signal for the cellular localization of SopB resides in a region close to its N terminus. Overexpression of SopB led to silencing of genes linked to, but well-separated from, a cluster of SopB-binding sites termed sopC. In this SopB-mediated repression of sopC-linked genes, all but the N-terminal 82 amino acids of SopB can be replaced by the DNA-binding domain of a sequence-specific DNA -binding protein, provided that the sopC locus is also replaced by the recognition sequence of the DNA-binding domain. These results suggest a mechanism of gene silencing: patches of closely packed DNA-binding protein is localized to specific cellular sites; such a patch can capture a DNA carrying the recognition site of the DNA -binding domain and sequestrate genes adjacent to the recognition site through nonspecific binding of DNA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.255-260
• /
• 2018

In recent years, increasing electricity use has led to considerable interest in green energy. In order to effectively supply, cut off, and operate an electric power system, many electric power facilities such as gas insulation switch (GIS), cable, and large substation facilities with higher densities are being developed to meet demand. However, because of the increased use of aging electric power facilities, safety problems are emerging. Electromagnetic wave and leakage current detection are mainly used as sensing methods to detect live-line partial discharges. Although electromagnetic sensors are excellent at providing an initial diagnosis and very reliable, it is difficult to precisely determine the fault point, while leakage current sensors require a connection to the ground line and are very vulnerable to line noise. The partial discharge characteristic in particular is accompanied by statistical irregularity, and it has been reported that proper statistical processing of data is very important. Therefore, in this paper, we present the results of analyzing ${\Phi}-q-n$ cluster distributions of partial discharge characteristics by using K-means clustering to develop an expert partial discharge diagnosis system generated in a GIS facility.

• Mycobiology
• /
• v.45 no.4
• /
• pp.409-420
• /
• 2017

Foliar sprays of three plant resistance inducers, including chitosan (CH), potassium sorbate (PS) ($C_6H_7kO_2$), and potassium bicarbonates (PB) ($KHCO_3$), were used for resistance inducing against Erysiphe cichoracearum DC (powdery mildew) infecting okra plants. Experiments under green house and field conditions showed that, the powdery mildew disease severity was significantly reduced with all tested treatments of CH, PS, and PB in comparison with untreated control. CH at 0.5% and 0.75% (w/v) plus PS at 1.0% and 2.0% and/or PB at 2.0% or 3.0% recorded as the most effective treatments. Moreover, the highest values of vegetative studies and yield were observed with such treatments. CH and potassium salts treatments reflected many compounds of defense singles which leading to the activation power defense system in okra plant. The highest records of reduction in powdery mildew were accompanied with increasing in total phenolic, protein content and increased the activity of polyphenol oxidase, peroxidase, chitinase, and ${\beta}$-1,3-glucanase in okra plants. Meanwhile, single treatments of CH, PS, and PB at high concentration (0.75%, 2.0%, and/or 3.0%) caused considerable effects. Therefore, application of CH and potassium salts as natural and chemical inducers by foliar methods can be used to control of powdery mildew disease at early stages of growth and led to a maximum fruit yield in okra plants.

• Korean Journal of Materials Research
• /
• v.16 no.10
• /
• pp.624-628
• /
• 2006

In this study, divalent europium-activated $NaCaPO_4$ green phosphor powders were prepared by the chemical synthetic method followed by heat treatment in reduced atmosphere, and the crystal structures, morphologies and photoluminescent properties of the powders were investigated by x-ray powder diffraction, scanning electron microscope and spectrometer for the first time. The effects of Ca/P and Na/Ca mole ratios on the final products were also investigated. The influences of input amount change of europium as the activator on the light emission intensity were studied, and the resulting concentration quenching phenomenon was observed. The optimized synthesis conditions obtained in this study were Ca/P mole ratio 1.2, Na/Ca mole ratio 3.0 and 4 mole%Eu. The peak wavelength was 505 nm for all the samples. The result of excitation spectrum measurement indicated that the excitation efficiency was high for the long-wavelength UV region. It was thus concluded that the samples prepared in this study can be successfully applied for the light-emitting devices such as LED excited with long-wavelength UV light sources.

• Weed & Turfgrass Science
• /
• v.5 no.4
• /
• pp.274-279
• /
• 2016

Aphanisticus congener is a newly recorded buprestid (Coleoptera) insect pest of turfgrass in Korea. This buprestid pest was initially found from turfgrass conservation site in a greenhouse in Jinju, Gyeongnam province, Korea in July, 2014. The Aphanisticus in the family Buprestidae is a leaf miner. A. congener is the close species of A. aeneus which was firstly reported as sugarcane leaf sucker in India. A. congener was active from early July to late August in the greenhouse. Damage by the insect led to drying out and browning of turfgrass leaf because larva fed on cell sap of leaves and adult fed on leaf surface. A. congener damaged Zoysia japonica, Z. sinica, Conodon dactylon, and Poa pratensis when adults were artificially released into potted turfgrasses in the laboratory. In green house, A. congener damaged Z. japonica, Z. macrostachya, Z. matrella, Z. sinica, Conodon dactylon, and hybrid zoysiagrass. However, no damage symptoms were observed from the same turfgrass accessions in the nearby field of the greenhouse. Thus, the new coleopteran pest may be a warm-adapted pest for turfgrass, damaging turfgrass leaf only in warmer conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.535-538
• /
• 2005

The purpose of this work is to study a process organization on space cognition by visio-auditory stimulation. We develop the system of visuo-auditory stimulation and Humans responses measurement to observe the relationship between the sensory and the motor system fur the localization of visual and auditory target direction in the space. The experiments is performed in a soundproof chamber, 2163 red, green and yellow LED(Luminescent Diode, Brightness: $20cd/m^2$ 1 degree apart each other)arrayed in front of half-circle panel were used and 57 Speaker(5 degree apart each other) arrayed in the hidden of half-circle panel. Physiological parameters such as EOG (Electro-Oculography), head movement and their synergic control are measured by BIOPAC system and Optotrak Certus. This result shows that the response latency time of the perception motion in the center is laster than the periphery of panel. These results can be used in the study of characterizing the spatial cognition.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.5
• /
• pp.233-238
• /
• 2014

In this paper, in order to achieve slim and light liquid crystal display, we examine the optical conditions that can obtain uniform light with higher optical efficiency over whole light guide plate (LGP) through simulation. Furthermore, to overcome the issues of hot spot in front of red, green, and blue light emitting diodes (RGB LEDs) source and non-uniform color mixing, we propose four shaped color mixing bars tied up with the LGP and check the optical characteristics of the LGP with them by simulation. Consequently, we could know the optical conditions of improving optical efficiency and optical uniformity in the LGP through the optical design. Also we confirmed that the issues of the hot spot and non-uniform color mixing in edge type LED could be solved by using the ${\bigwedge}$-shaped window color mixing bar.