• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.257-264
• /
• 2012

Objectives: This study's aims were to evaluate the effects of load center of gravity within an object lifted and feet placements on peak EMG amplitude acting on bilateral low back muscle groups, and to suggest adequate foot strategies with an aim to reducing low back pain incidence while lifting asymmetric load. Methods: The hypotheses that asymmetric load imposes more peak EMG amplitude on low back muscles contralateral to load center of gravity than symmetric load and maximum peak EMG amplitude out of bilateral ones can be relieved by locating one foot close to load center of gravity in front of the other were established based on biomechanics including safety margin model and previous researches. 11 male subjects were required to lift symmetrically a 15.8kg object during 2sec according to each conditions; symmetric load-parallel feet (SP), asymmetric load-parallel feet (AP), asymmetric load-one foot contralateral to load center of gravity in front of the other (AL), and asymmetric load-one foot ipsilateral to load center of gravity in front of the other (AR). Bilateral longissimus, iliocostalis, and multifidus on right and left low back area were selected as target muscles, and asymmetric load had load center of gravity 10cm deviated to the right from the center in the frontal plane. Results: Greater peak EMG amplitude in left muscle group than in right one was observed due to the effect of load center of gravity, and mean peak EMG amplitudes on both sides was not affected by load center of gravity because of EMG balancing effect. However, the difference of peak EMG amplitudes between both sides was significantly affected by it. Maximum peak EMG amplitude out of both sides and the difference of peak EMG amplitude between both sides could be reduced with keeping one foot ipsilateral to load center of gravity in front of the other while lifting asymmetric load. Conclusions: It was likely that asymmetric load lead to the elevated incidence of low back pain in comparison with symmetric load based on maximum peak EMG amplitude occurrence and greater imbalanced peak EMG amplitude between both sides. Changing feet positions according to the location of load center of gravity was suggested as one intervention able to reduce the low back pain incidence.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 봄 학술발표회 논문집
• /
• pp.72-78
• /
• 1991

An improved procedure for earthquake resistant design of multistory building structures is proposed in this study. The effect of gravity load on seismic response of structures is evaluated through nonlinear dynamic analyses of a single story example structure. The presence of gravity load tends to initiate plastic hinge formation in earlier stage of a strong earthquake. However, the effect of gravity load seems to disapper as ground motion is getting stronger. And one of shortcomings in current earthquake resistant codes is overestimation of gravity load effects when earthquake load is applied at the same time so that it may leads to less inelastic deformation or structural damage in upper stories, and inelastic deformation is increased in lower stories. Based on these observation, an improved procedure for earthquake resistant design is derived by reducing the factor for gravity load and inceasing that for seismic load. Structures designed by the proposed design procedure turned out to have increased safety and stability against strong earthquakes.

• Computers and Concrete
• /
• 제20권1호
• /
• pp.11-22
• /
• 2017

There are two methods to model the plastification of members comprising lumped and distributed plasticity. When a reinforced concrete member experiences inelastic deformations, cracks tend to spread from the joint interface resulting in a curvature distribution; therefore, the lumped plasticity methods assuming plasticity is concentrated at a zero-length plastic hinge section at the ends of the elements, cannot model the actual behavior of reinforced concrete members. Some spread plasticity models including uniform, linear and recently power have been developed to take extended inelastic zone into account. In the aforementioned models, the extended inelastic zones in proximity of critical sections assumed close to connections are considered. Although the mentioned assumption is proper for the buildings simply imposed lateral loads, it is not appropriate for the gravity load effects. The gravity load effects can influence the inelastic zones in structural elements; therefore, the plasticity models presenting the flexibility distribution along the member merely based on lateral loads apart from the gravity load effects can bring about incorrect stiffness matrix for structure. In this study, the linear flexibility distribution model is improved to account for the distributed plasticity of members subjected to both gravity and lateral load effects. To do so, a new model in which, each member is taken as one structural element into account is proposed. Some numerical examples from previous studies are assessed and outcomes confirm the accuracy of proposed model. Also comparing the results of the proposed model with other spread plasticity models illustrates glaring error produced due to neglecting the gravity load effects.

• 한국강구조학회 논문집
• /
• 제27권3호
• /
• pp.273-280
• /
• 2015

방폭설계에 가장 널리 사용되고 있는 등가단자유도 해석법은 구조부재의 방폭성능평가에 있어서 중력하중효과를 전혀 고려하지 않고 있다. 그러나 구조물의 기둥 및 벽체의 경우 일반적으로 중력하중이 존재하므로, 이를 고려한 구조부재의 방폭성능을 평가하여야 한다. 이 논문에서는 강재 압축재의 동적 폭발응답 등가단자유도해석에 중력하중효과를 반영하는 방안을 제시하고자 한다. 이를 위하여 압축재의 휨저항력과 고유주기를 일정하게 하고 최대폭발하중 및 지속시간, 중력하중을 달리하여 변수해석을 수행하였다. 등가단자유도해석결과와 유한요소해석결과를 비교하고, 다양한 중력하중을 작용한 경우에 대하여 유한요소해석에 의한 압축재의 폭발응답을 평가하였다. 최종적으로, 폭발하중, 중력하중, 부재특성에 따른 강재 압축재의 소요연성을 도표화하였다. 이 도표를 활용하여 중력하중을 고려한 강재 압축재의 폭발응답을 합리적이고 편리하게 예측할 수 있을 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.1-5
• /
• 1998

Nail withdrawal tests were conducted on clear wood of radiata pine. Nails were driven into the earlywood and latewood zones of each specimen, and nail withdrawal tests were then performed. Nail withdrawal loads were strongly dependent on earlywood and latewood and on nail position. The average load values for nail withdrawal in both the tangential and longitudinal directions were higher for latewood than for earlywood. Linear and nonlinear regression analyses of nail withdrawal load with specific gravity showed no discernible differences. Good correlations were obtained between nail withdrawal load and specific gravity.

• 한국지진공학회논문집
• /
• 제24권1호
• /
• pp.39-47
• /
• 2020

Lightly reinforced concrete (RC) moment frames may suffer significant damage during large earthquake events. Most buildings with RC moment frames were designed without considering seismic loads. The load-displacement response of gravity load designed frames could be altered by masonry infill walls. The objective of this study is to investigate the load-displacement response of gravity load designed frames with masonry infill walls. For this purpose, three-story gravity load designed frames with masonry infill walls were considered. The masonry infilled RC frames demonstrated larger lateral strength and stiffness than bare RC frames, whereas their drift capacity was less than that of bare frames. A specimen with a partial-height infill wall showed the least drift capacity and energy dissipation capacity. This specimen failed in shear, whereas other specimens experienced a relatively ductile failure mode (flexure-shear failure).

• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.255-266
• /
• 2010

초고층 건물에서 아웃리거를 이용한 횡력저항시스템이 자주 사용되고 있다. 아웃리거가 외부 기둥과 내부 코어를 연결함으로써 외부 기둥이 횡력저항시스템에 참여할 수 있어 구조적 저항능력이 향상될 수 있다. 그러나 아웃리거는 횡력 뿐만 아니라 중력하중의 조절에도 기여할 수 있다. 하중을 메가 기둥으로 전이시키거나 기둥, 벽체, 파일 등의 연직 부재들 간에 중력하중을 균등하게 분포시키며, 기초 시스템에서의 부등침하를 최소화하기 위하여 중력하중의 흐름이 아웃리거 부재에 의하여 변경될 수 있다. 본 연구에서는 100층 이상의 초고층 사례들에 대한 전산구조해석을 통하여 중력하중 조절에 대한 아웃리거의 효과를 분석한다. 아웃리거 유무에 따른 3차원 모델의 구조해석이 수행되며, 기둥과 파일에서의 중력하중 분포 및 기초 침하가 분석된다. 또한, 완공 단계 뿐만 아니라 시공 단계에서의 중력하중 조절에 대한 아웃리거의 효과도 분석된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.226-232
• /
• 2009

In this paper, a design and analysis of a gravity compensator which is a new device to reduce the joint torque of robots caused due to gravity is presented. Joints of all robots are loaded by large torques due to gravity. By applying the gravity compensator to the robot joints, the load torques applied to the robot joints are reduced by the repulsive force of the gravity compensator such that the size of the joint actuation motor can be reduced. In this paper, the structure and force relation of the gravity compensator are analyzed. The superior performance of the proposed gravity compensator is verified through experiments which measure the joint motor current caused by the load applied to the robot link.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4629-4635
• /
• 2012

본 연구의 목적은 중량물 들기 작업시 비대칭 무게중심과 상체 옆으로 기울임 여부가 어떻게 L5/S1 주변 허리 근육의 Peak EMG 진폭에 영향을 미치는지를 알아보는 것이다. 요통을 포함한 근골격계질환은 무겁지 않은 물체의 지속적인 반복 취급뿐만 아니라, 일회성의 커다란 부하도 신체 조직의 부담으로 작용하여 발생할 수 있다. 11명의 20대 대학생 남성은 15.8kg의 물체를 들어올리는 Task를 3회 실행하였다. 이 때 대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 경우, 비대칭 무게중심의 물체를 상체를 기울이지 않고 들어 올리는 조건, 그리고 비대칭 무게중심의 물체를 상체를 기울여서 들어 올리는 경우에 따라 6개의 L5/S1 주변의 근육들로부터 Peak EMG 진폭이 수집되어 분석되었다. 결과는 비대칭 무게중심을 지닌 물체 취급시 무게중심에서 먼 쪽의 허리 근육에서 Peak EMG 진폭이 발생하고, 그 진폭의 크기는 대칭 무게중심 물체를 취급하는 경우보다 크게 나타났다. 또한, 비대칭 무게중심의 물체를 취급할 경우 물체나 상체를 물체의 무게중심 방향으로 기울이는 것은 기울이지 않을 때보다 대측성 등근육에서 Peak EMG 진폭 증가시켰다. 이러한 연구 결과는 비대칭 무게중심의 중량물을 들어 올리는 작업에서 요통 발생을 예방하기 위한 행정적인 조치로써 가능하면 상체를 전두면 기준으로 기울이지 않는 작업자 자세 조언이 필요함을 말해준다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.209-216
• /
• 1997

The seismic performance of R/C frame structure designed for gravity load investigated in this paper. The investigation shows a satisfactory seismic performance against moderate earthquakes but column sway failure mechanism against severe earthquakes. Capacity design method is employed to redesign the R/C frame to improve seismic performance. This study provides an insight an insight into seismic upgrading methodology for medium rise R/C frame structures designed gravity load.