• 한국안전학회지
• /
• 제35권4호
• /
• pp.84-91
• /
• 2020

The Korean nuclear industry developed the SPACE (Safety and Performance Analysis Code for nuclear power plants) code and this code adpots two-phase flows, two-fluid, three-field models which are comprised of gas, continuous liquid and droplet fields and has a capability to simulate three-dimensional model. According to the revised law by the Nuclear Safety and Security Commission (NSSC) in Korea, the multiple failure accidents that must be considered for accident management plan of nuclear power plant was determined based on the lessons learned from the Fukushima accident. Generally, to improve the reliability of the calculation results of a safety analysis code, verification work for separate and integral effect experiments is required. In this reason, the goal of this work is to verify calculation capability of SPACE code for multiple failure accident. For this purpose, it was selected the experiment which was conducted to simulate a Multiple Steam Generator Tube Rupture(MSGTR) accident with Passive Auxiliary Feedwater System(PAFS) operation by Korea Atomic Energy Research Institute (KAERI) and focused that the comparison between the experiment results and code calculation results to verify the performance of the SPACE code. The MSGR accident has a unique feature of the penetration of the barrier between the Reactor Coolant System (RCS) and the secondary system resulting from multiple failure of steam generator U-tubes. The PAFS is one of the advanced safety features with passive cooling system to replace a conventional active auxiliary feedwater system. This system is passively capable of condensing steam generated in steam generator and feeding the condensed water to the steam generator by gravity. As the results of overall system transient response using SPACE code showed similar trends with the experimental results such as the system pressure, mass flow rate, and collapsed water level in component. In conclusion, it could be concluded that the SPACE code has sufficient capability to simulate a MSGTR accident.

• 상하수도학회지
• /
• 제23권5호
• /
• pp.557-564
• /
• 2009

A combined sewer system can quickly drain both storm water and sewage, improve the living environment and resolve flood measures. A combined sewer system is much superior to separate sewer system in reduction of the non-point source pollutant load. However, during rainfall. it is impossible in time, space and economic terms to cope with the entire volume of storm water. A sewage system that exceeds the capacity of the sewer facilities drain into the river mixed with storm-water. In addition, high concentration of CSOs by first-flush increase pollution load and reduce treatment efficiency in sewage treatment plant. The aim of this study was to develope a processing unit for the removal of high CSOs concentrations in relation to water quality during rainfall events in a combined sewer. The most suitable operational design for processing facilities under various conditions was also determined. With a designed discharge of 19.89 m/min, the removal efficiency was good, without excessive overflow, but it was less effective in relation to underflow, and decreased with decreasing particle size and specific gravity. It was necessary to lessen radius of vortex separator for increasing inlet velocity in optimum range for efficient performance, and removal efficiency was considered to high because of rotation increases through enlargement of comparing height of vortex separator in diameter. By distribution of influent particle size, the actual turbulent flow and experimental results was a little different from the theoretical removal efficiency due to turbulent effect in device.

• 대한족부족관절학회지
• /
• 제6권1호
• /
• pp.21-27
• /
• 2002

Pressure sores are an ulceration and necrosis of the skin and underlying tissue usually occur after prolonged or repeated pressure by interruption of blood flow from the small. vessels to the skin and deep tissue. The management of pressure sores is mostly difficult and requires prolonged hospitalization or repeated surgical interventions with a high recurrence rate. In this article we reviewed 14 cases of National Pressure Ulcer Advisory Pannel staging III, IV over the lateral malleolar area of the ankle in 2 years period from January 1999 to October 2001. The pressure over lateral malleolar area was mainly due to unique Korean sitting position with cross legs at flexed hips and knees or supine position of patient with external rotation of low extremity. Male to female ratio was 11: 3 and ages were between 36 and 83 (mean age: 67.1 years). Associated diseases were DM(7 cases), Hemiparesis caused by CVA(2 cases), Liver cirrhosis(2 cases), disarticulation of opposite hip due to squamous cell ca.(1 case), Intertrochanteric Fx.(1 case). Wound cultures reported Staphylococus, Pseudomonas and others. Abnormally elevated ESR and CRP were seen in 6 cases. Operative treatments were irrigation and debridement, direct closure with gravity drainage and skin grafting. The most important aspect of pressure sore treatment is pressure relief of the lateral malleolar area. Pressure-relieving Cast or Brace was helpful for local management and preventing recurrence.

• 대한토목학회논문집
• /
• 제14권5호
• /
• pp.1145-1158
• /
• 1994

물의 유동(流動)에 관한 계산상 효율성(效率性)을 갖는 자유수면(自由水面)을 고려한 3차원(次元) 유한차분(有限差分) 수직모형(數値模型)을 개발하였다. 수직모형(數値模型)은 연직방향(鉛直方向)에 대해 정규화(正規化)한 좌표(座標)(${\sigma}$-coordinate)를 사용하며, 시간(時間) 적분방법(積分方法)으로는 반음해법(半陰解法)(semi-implicit)을 사용하여 계산시간(計算時間)의 효율성(效率性)을 도모하였다. 모드분리(mode-splitting)개념을 도입하여 내부모드(internal mode)에 대해서는 양해법(陽解法)을 사용하였으며, 외부모드(external mode)는 수평방향(水平方向) 운동량방정식(運動量方程式)들과 연속방정식(連續方程式)의 차분식(差分式)으로부터 구한 타원형(楕圓型) 차분방정식(差分方程式)을 SOR방법에 의하여 해석하였다. 이와 같은 방법은 계산(計算) 시간간격(詩間間隔)이 표면(表面) 중력파(重力波)에 대한 CFL(Courant-Fredrich-Lewy)조건에 의해 제약을 받지 않아 계산시간(計算時間)의 효율성을 도모할 수 있다. 개발된 모형은 1차원(次元) 수로(水路)에서 취송유(吹送流)의 연직분포(鉛直分布)에 대한 해석해(解析解)와 비교(比較) 및 연직(鉛直) 가변격자(可變格子)의 도입에 따른 오차분석(誤差分析) 정사각형(正四角形) 호수(湖水)에서 취송유(吹送流) 계산(計算) 및 차분화(差分化) 상수(常數)들의 민감도(敏感度) 분석(分析)을 수행하였다.

• 대한기계학회논문집B
• /
• 제36권7호
• /
• pp.721-730
• /
• 2012

본 연구에서는 벽면부착에 의해 야기되는 다상유동에 대한 수치적 연구를 제시한다. 먼저 다상유동 해석을 위해 표면장력에 대한 CSF(Continuum Surface Force) 모델 및 벽면부착 경계조건 모델을 비정렬격자계에 적합하도록 수치해석방법을 정립시키고, Myong(2009)이 개발한 비정렬격자계와 VOF 방법으로 체적포착법(volume capturing method)을 사용한 수치해석방법(코드)에 삽입하였다. 또한 본 수치해석방법을 사용하여 중력을 포함하여 어떤 외력도 존재하지 않고 오직 벽면부착에 의해 야기되는 유동현상인 원통형 탱크의 바닥에 위치한 얕은 물풀(water pool)에 대해 물이 벽면을 적시는 경우와 적시지 않는 경우에 대해 수치해석 하였다. 연구결과, 본 수치해석방법은 벽면부착에 의해 야기되는 다상유동 문제에 대한 유용성이 입증되었다.

• Wind and Structures
• /
• 제29권6호
• /
• pp.417-430
• /
• 2019

To study the wake influence of an upstream bridge on the wind-resistance performance of a downstream bridge, two adjacent long-span cable-stayed bridges are taken as examples. Based on wind tunnel tests, the static aerodynamic coefficients and the dynamic response of the downstream bridge are measured in the wake of the upstream one. Considering different horizontal and vertical distances, the flutter derivatives of the downstream bridge at different angles of attack are extracted by Computational Fluid Dynamics (CFD) simulations and discussed, and the change in critical flutter state is further studied. The results show that a train passing through the downstream bridge could significantly increase the lift coefficient of the bridge which has the same direction with the gravity of the train, leading to possible vertical deformation and vibration. In the wake of the upstream bridge, the change in lift coefficient of the downstream bridge is reduced, but the dynamic response seems to be strong. The effect of aerodynamic interference on flutter stability is related to the horizontal and vertical distances between the two adjacent bridges as well as the attack angle of incoming flow. At large angles of attack, the aerodynamic condition around the downstream girder which may drive the bridge to torsional flutter instability is weakened by the wake of the upstream bridge, and the critical flutter wind speed increases at this situation.

• 한국물환경학회지
• /
• 제22권2호
• /
• pp.215-221
• /
• 2006

This research presents results from laboratory and pilot-scale experiments to remove high-nitrate in pickling wastewater using the sequencing batch reactor (SBR) as a biological method. During the experimental periods, the influent concentrations of NOx-N and $Ca^{+2}$ were analyzed to be 350-1,600 and 700-800 mg/L, respectively. In order to provide carbon source for denitrification, methanol has been added in proportion to the influent nitrate loading. The mean concentrations of MLSS and MLVSS, the fraction of volatile solids in sludge and the sludge volume index were measured to be 27 g/L, 5 g/L, 18.5% and 7.5, respectively. The solid retention time was kept in the range of 18 to 22 days, specific denitrification rate ($U_{dn}$) was $0.301g{NO_3}^--N/gVSS/day$. The oxidized nitrogen concentration of effluent ranged 2-34 mg/L with an average of 5.2 mg/L, the overall reduction in total nitrogen was more than 99.2%. In order to treat the pickling wastewater including the high concentration of nitrate and $Ca^{+2}$, the continuous flow process is not suitable because the specific gravity of the sludge is considerably increased by $Ca^{+2}$, thus the SBR process is shown to be very effective to treat the pickling wastewater.

• 한국식품과학회지
• /
• 제40권6호
• /
• pp.621-625
• /
• 2008

오징어 간유 미세캡슐화 분말을 HPMC-FCC, zein-DP로 코팅하여 유동층 코팅 특성을 살펴본 결과, 유동층 코팅 효율은 HPMC-FCC, zein-DP 모두 90%의 효율을 나타내었다. 겉보기 밀도는 zein-DP 코팅분말이 0.6 g/mL로 높게 나타나 코팅 분말의 비중이 커져 흐름성이 개선되었음을 확인할 수 있었다. 인공위액과 인공장액에 대한 용해성을 살펴본 결과, HPMC-FCC는 각각 59.9%와 0%를 나타내었고 zein-DP는 각각 0%와 31.0%를 나타내어 코팅재료에 따라 용해성을 조절할 수 있었다. 저장 안정성은 zein-DP나 HPMC-FCC로 코팅한 분말이 미세캡슐화 분말보다 높은 PUFA/SFA 잔존율을 보여, 유동층 코팅 기술이 유지식품의 안정성을 확보할 수 있는 새로운 기술이 될 수 있음을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.27-34
• /
• 2004

측 추력(Lateral Jet) 제어 시스템에 의해 자세제어를 하는 미사일 주위의 초음속 유동장 해석을 위하여 삼차원 Navier-Stokes 코드 (AADL3D)를 개발하고, 이를 이용한 수치해석 연구를 수행하였다. 미사일의 받음각, 제트 노즐의 위치, 그리고 제트의 분출 각 등의 Parameter가 미사일에 미치는 수직력 및 피칭모멘트에 대한 영향을 알아보기 위한 사례 연구를 수행하였다. 또한 미사일은 무게 중심을 기준으로 4개 영역으로 나뉘어 각 부분에서의 수직력과 모멘트에 대한 기여도를 비교하였다. 공력해석 결과, 각 Parameter 변화에 대한 서로 다른 수직력과 모멘트 변화양상 및 그 원인을 확인할 수 있었다. 또한 각 Parameter 의 적절한 조합에 의해 모멘트 발생을 최소화 할 수 있음을 보여 주었다.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.