• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.226-235
• /
• 2002

This experiment was to evaluate lodging characteristics of 35 recommended rice varieties of Kyonggi-do at normal (110 kg N/ha) and hen (220 kg N/ha) nitrogen application rates during 1999 to 2000. At heavy N fertilization rate, varieties that were highly resistant to lodging were Obongbyeo, Daejinbyeo, Naepoongbyeo, Nonganbyeo and Ilpumbyeo. Fourteen varieties including Daeanbyeo were moderately resistant and 11 varieties including Jinbubyeo were susceptible to lodging. The lodging-related characters which showed the highest effect on lodging at lodging degree of 9 were culm length and height of center gravity, culm length at lodging degree of 5, and culm length and the third internode length at lodging degree of 3 or below. The difference in rice yield between normal and heavy nitrogen fertilization rate was within 5% in early-maturing varieties but there was great yield difference in mid- and late-maturing varieties depending on the degree of lodging. Consequently, stable rice yield could be obtained by selecting lodging-resistant varieties and lowering fertilization rate, specially in the paddy field where lodging occurrence is common.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.395-402
• /
• 2013

The purpose of this study was to investigate change of mechanical energy before and after training of half vinyasa yoga. Thirteen subjects (height: $163.4{\pm}3.9$ cm, body mass: $54.9{\pm}7.3$ kg, age: $20.0{\pm}0.49$ yrs) participated in this experiment. The motions of half vnyasa yoga were captured with Vicon system and parameters were calculated with Visual-3D. After training of half vinyasa yoga, the mechanical energies of body segments were increased and increments of mechanical energies in the lower segments were greater than the upper segments. The phase increments of mechanical energies increased phase 1, phase 2, and phase 3 in order. After training of half vinyasa yoga, phase contributions of body segments were similar before training of half vinyasa yoga. The contribution of mechanical energy on trunk segment in body was the greatest contribution of upper segments; also that of mechanical energy on thigh segment in body was the greatest contribution of lower segments. Before training, the coefficient of correlation between vertical center of gravity (CoGz) and mechanical energy of phase 3 was a -.559, but after training, the coefficient of correlation between CoGz and mechanical energy of phase 2 was a .587. These findings suggest that the training of half vinyasa yoga may be increasing the mechanical energies of body segments.

• Korean journal of food and cookery science
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2015

The loquat (Eriobotrya japonica) is a plant belonging to the Rosaceae family, native to south-central China. It is cultivated in relatively warm areas such as Spain, Japan and South Korea. It is used commercially as an ornamental plant and for its yellow fruit, which contains much carotenoid, sugar and a little organic acid. In this study, chiffon cakes were prepared with the addition of 3%, 6%, 9% and 12% loquat fruit powder (LFP) in order to invest the mixing conditions. When more LFP was added to the dough, the pH level of the dough became lower. Specific gravity and viscosity of the dough significantly increased as higher amounts of LFP were added. In baked cakes, the weight and baking loss rate of LFP were not significantly different between samples, and the height of the risen test samples were lower than that of the controls. Moisture content was 33.58% in the 12% LFP sample (12% LFPS), which was the highest of all the samples. With respect to crust color, lightness, redness and, yellowness, these significantly decreased as the amount of LFP was increased, the 12% LFP being the lowest of all the samples. Lightness and yellowness of crumbs significantly decreased as the amount of LFP was increased, whereas redness showed the reverse effect. When looking at hardness and adhesiveness, the 12% LFPS was the highest of all the samples, nevertheless a difference in resilience was not significant among the samples. According to consumer perception, bitterness was significantly increased as amounts of LFP increased, however a difference in salty, astringency and oily tastes were not significant among the samples. The 12% LFPS showed the lowest score with respect to softness and overall acceptability. In conclusion, LFP could be considered a functional material, with the optimum amount of LFP for a chiffon cake of 3~9%.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.49.1-49.1
• /
• 2010

The study of pores, small penumbraless sunspots, can give us a chance to understand how strong magnetic fields interact with convective motions in the photosphere. For a better understanding of this interaction, we investigate the temporal variation of several tiny pores smaller than 2". These pores were observed by the Solar Optical Telescope (SOT) onboard Hinode on 2006 December 29. We have analyzed the high resolution spectropolarimetric (SP) data and the G-band filtergrams taken during the observation. Magnetic flux density and Doppler velocities of the pores are estimated by applying the center of gravity (COG) method to the SP data. The horizontal motions in and around the pores are tracked by adopting the Nonlinear Affine Velocity Estimator (NAVE) method to the G-band filter images. As results, we found the followings. (1) Darkness of pores is positively correlated with magnetic flux density. (2) Downflows always exist inside and around the pores. (3) The speed of downflows inside the pores is negatively correlated with their darkness. (4) The pores are surrounded by strong downflows. (5) Brightness changes of the pores are correlated with the divergence of mass flow (correlation coefficient > 0.9). (6) The pores in the growing phase are associated with the converging flow pattern and the pores in the decay phase with the diverging flow pattern. Our results support the idea that a pore grows as magnetic flux density increases due to the convergence of ambient mass flow and it decays with the decrease of the flux density due to the diverging mass flow.

• Physical Therapy Korea
• /
• v.6 no.3
• /
• pp.11-21
• /
• 1999

Human balance is maintained through a complex process involving sensory detection of body motions, integration of sensorimotor information within the central nervous system, and execution of appropriate musculoskeletal responses. The basic task of balance is to position the body center of gravity (COG) over some portion of the support base. When the COG extends beyond the base of support, the person has exceeded the limits of stability (LOS). At this point, a step or stumble is required to prevent a fall. Automatic postural responses operate to keep the COG over the base of support. They are a set of functionally organized, long-loop responses that act to keep the body in a state of equilibrium. There are four commonly identified automatic postural responses, or strategies. These are ankle strategy, hip strategy, suspensory (knee) strategy, and stepping strategy. Thus, the purpose of this study was to evaluate the LOS using various knee strategies. Forty subjects participated in this study. The subjects were comprised of 20 males and 20 females who were without neurologic, orthopaedic or balance performance impairments. The LOS was measured with a Balance Performance Monitor (BPM) Dataprint Software Version 5.3. The results of this study were as follows: 1) Knee joint angle which is to increase stability of standing balance with using knee strategy was at mid-range. 2) There were statistically significant differences in anteroposterior LOSs according to the knee strategy. 3) There were no statistically significant differences in mediolateral LOSs according to the knee strategy. 4) There were statistically significant differences of anteroposterior LOSs with using knee strategy according to gender. 5) There were no statistically significant differences in mediolateral LOSs with using knee strategy according to gender.

• Journal of Environmental Health Sciences
• /
• v.18 no.2
• /
• pp.39-51
• /
• 1992

This study was carried out for 1 year between 1990 and 1991. The interviewers visited 513 households to evaluate the perception of the residents using the Simple Piped Water Supply (SPWS), and examined the pollution source surrounding 48 SPWS facilities and water quality by the chemical and microbiological method. The purpose of this study was to find out problems linked with SPWS and to investigate more efficient way of improvement in rural water supply. The results of the study are summarized as follows: 1) Approximately 44.0% of the sampled population have been served by simple piped water supply. 2) The drinking water was mostly taken from the springs in 8 sites and valley water in 40 sites. 3) Considering the type of distribution of the SPWS, there are 40 natural gravity systems and 8 pumping systems. 4) Out of the 180 SPWS in Chun Sung Area, 73.9% of the SPWS facilities %'ere used more than ten years. 5) 47.4% of the SPWS facilities are neighbored with pollution source. 6) 42.4% of the maintenance crews were not committed to their job but instead, the facilities were operated by some residents or community leaders who were personally concerned about quality of the facilities. 7) About 36.9% of the residents complaind that the amount of daily water supply is not adequate. 8) About 55.6% of the residents felt that the water quality is good for drinking water and therefore, But in contrast, the biochemical tests indicated that most of the SPWS met the drinking water quality standards. 9) Under the present water analysis system, The method of sampling and analysis are not effective, so that analysis system shoud be done by local health center.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.348-350
• /
• 1997

Because of internal voids ininsulators give rise to partial discharge(PD), which cause local breakdown and even entire insulation breakdown. Treeing due to PD is one of the main causes of breakdown of the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation has become important. From this viewpoint, our studies diagnose insulation degradation using the method of computer sensing system, which has the advantages of PD and acoustic emission(AE) sensing system. To use advantages of these two methods can be used effectively to search for treeing location and PD in some materials. In analysis method of degradation. We analyzed the PD pulse and AE pulses by regression analysis, compared to these obtained the correlation coefficient and determination coefficient by T-distribution and saw that PD and AE pulses show a similar pattern on the whole. Finally using statically operator such as the center of gravity(G), the gradient of the discharge distribution(C), we have analyzed for the prediction of life which we can be obtained the time, occurred of many pulse of small discharge amplitude.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.147-160
• /
• 2017

In this study, the optimum parameters of Tuned Mass Dampers (TMDs) are proposed using Gravity Search Algorithm (GSA) and Particle Swarm Optimization (PSO) to reduce the responses of the structures. A MATLAB program is developed to apply the new approach to the benchmark 10 and 40-story structures. The obtained results are compared to those of other optimization methods used in the literature to verify the developed code. To show the efficiency and accuracy of the proposed methods, nine far-field and near-field worldwide earthquakes are applied to the structures. The results reveal that in the 40-story structure, GSA algorithm can reduce the Relative Displacement (RD) and Absolute Acceleration (AA) up to 43% and 21%, respectively while the PSO decreases them by 50% and 25%, respectively. In contrast, both GSA and PSO algorithms reduce the RD and AA about 29% and 21% for the 10-story structure. Furthermore, using the proposed approach the required TMD parameters reduce by 47% and 63% in the 40 and 10-story buildings in comparison with the referenced ones. Result evaluation and related comparison indicate that these methods are more effective even by using smaller TMD parameters resulting in the reduction of acting force from TMD, having smaller stiffness and damping factors while being more cost effective due to its decreased parameters. In other words, the TMD with optimum parameters can play a positive role in both tall and typical structures.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.258-268
• /
• 2017

In this study, we aim to converge a technology for analyzing the hydraulic circuit of a loading arm with an- other one for analyzing multi-body dynamics by utilizing analysis software SimulationX. Further, this study intends to overcome the limitations of the existing technology for analyzing a hydraulic circuit with a variation at the rotation center of the moving mass and the difficulty of incorporating the behavior in a gravity field. First, the specifications of the hydraulic circuit components were reflected in an analysis model to secure reliability. Hydraulic circuit modeling was then performed using a single analysis model with a verified reliability. Subsequently, the multi-body system (MBS) model of the loading arm was formed. Finally, the analysis model of the hydraulic circuit and the MBS model were converged to check if the circuit analysis result was exactly reflected in the MBS model. The convergence analysis model has development cost-saving effect because it is capable of predicting the dynamic behavior of an object without the prototype.