• 제목/요약/키워드: gratings

검색결과 445건 처리시간 0.026초

비정질 As2Se3 박막의 Ag 의존적 홀로그래픽 격자 형성 특성 분석

  • 남기현;김장한;정홍배
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.275-276
    • /
    • 2011
  • We have investigated the holographic grating formation on Ag-doped amorphous chalcogenide As2Se3 thin films with Ag layer. The basic optical parameter which is a refractive index and extinction coefficent was taken by n&k analyzer. The source of laser was selected based on these parameter. Holographic gratings have been formed using He-Ne laser (wavelength: 632.8 nm) Diode Pumped Solid State laser (DPSS, wavelength: 532.0 nm) under [P:P] polarized the intensity polarization holography. The diffraction efficiency was obtained by +1st order intensity.

  • PDF

TEM 관련 이론해설 (2): Fourier 변환 (Fourier Transformations)

  • 이확주
    • Applied Microscopy
    • /
    • 제32권3호
    • /
    • pp.195-204
    • /
    • 2002
  • TEM 이론의 기초가 되는 델타함수, 콘볼루션 적분, 퓨리에 변환에 관한 개념을 소개하고 이에 대한 응용으로 슬릿함수, 현저한 폭을 갖는 2개의 슬릿, 유한 크기의 파동 train, 좁은 슬릿의 주기적인 배열, 임의의 주기 함수, diffraction grating, 회절 격자, 그리고 gaussian 함수에서의 퓨리에 변환에 관한 수학적인 방법의 적용을 소개하였다.

유전체 도파관 대역통과 필터에 관한 연구 (A Study of Dielectric Waveguide Bandpass Filter)

  • Park, Dong-Chul
    • 대한전자공학회논문지
    • /
    • 제23권2호
    • /
    • pp.178-181
    • /
    • 1986
  • Dielectric waveguide gratings of the image-guide type can be made by periodically cutting notches on the sides or in the top is the image guide. In this paper modeling of grattings using a transmission-line equivalent circuit with equal line lenghth is biscussed, and systematic design procedure of dielectric-waveguide bandpass filter using coupled gratings is presented. It is shown that experimental results is in excellent agreement with the computed response.

  • PDF

Fabrication of Micro-Photonic Component in Silica Glass with Femtosecond Laser Pulses

  • Watanabe, Wataru;Itoh, Kazuyoshi
    • Journal of the Optical Society of Korea
    • /
    • 제8권1호
    • /
    • pp.21-28
    • /
    • 2004
  • When femtosecond laser pulses are focused inside the bulk of transparent materials, the intensity in the focal volume becomes high enough to produce permanent structural modifications. This technique has been applied to fabricate three-dimensional photonic structures such as optical memory, waveguides, gratings, and couplers inside a wide variety of transparent materials. In this paper, we review the fabrication of optical elements in glasses with femtosecond laser pulses, including the fabrication of waveguides, couplers, Bragg gratings, zone plates, holographic memory, and micro holes.

Diffractive Liquid Crystal Displays

  • Tsvetkov, V.A.
    • Journal of Information Display
    • /
    • 제4권1호
    • /
    • pp.9-13
    • /
    • 2003
  • An overview of author activity in the area diffractive LCDs are given. The formation of colour spectrum DL CDs is made by switchable phase diffraction gratings created in a LC layer due to using of comb-like electrodes. The offered DLCDs functionate without polarizes, have high contrast and spectral of pure colours, broad viewing ngles. The existing production equipment can be adapted to manufacturing of DLCD without considerable alterations.

페라이트층을 갖는 유전체 슬랩 도파관 격자구조의 해석 (Analysis of planar dielectric waveguide gratings with a ferrite layer)

  • 이민준;윤상원;장익수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
    • /
    • pp.119-122
    • /
    • 1987
  • By cascading the step discontinuities on planar dielectric waveguides with a ferrite layer through two uniform planar dielectric waveguides, nonreciprocal scaterring characteristics of planar dielectric waveguide gratings are analyzed. The calculated results at 35GHz shows that the isolation mechanism takes place near band stop frequency range.

  • PDF

고온 어닐링 조건에 따른 FBG 센서의 내방사선 특성 (Radiation Hardness Characteristics of Fiber Bragg Gratings on the High Temperature Annealing Condition)

  • 김종열;이남호;정현규
    • 한국정보통신학회논문지
    • /
    • 제20권10호
    • /
    • pp.1980-1986
    • /
    • 2016
  • 본 논문에서는 KrF 레이저를 이용한 격자 공정 후 고온 어닐링 온도조건에 따른 감마방사선 영향을 분석하였다. 제작된 광섬유 브래그 격자는 게르마늄(Ge)이 첨가된 동일한 광섬유에 어닐링 온도를 달리하여 제작하였으며, $Co^{60}$ 감마선원을 이용하여 약 115 Gy/min의 선량률로 총선량 약 31 kGy 감마선을 조사하였다. 격자의 안정화를 위한 고온 어닐링 공정은 광섬유 브래그 격자의 방사선 민감도 변화에 영향을 주는 것으로 나타났다. 실험결과를 통하여, 각각 다른 온도(100, 150, $200^{\circ}C$)로 안정화시킨 광섬유 브래그 격자들은 고온에 노출될수록 방사선 민감도가 증가했으며, 어닐링 온도조건에 따라서 방사선에 의한 브래그 파장 변화는 2배 이상의 차이를 보였다.

광섬유 브래그 격자의 방사선 민감도에 대한 수소로딩의 영향 (The Influence of Hydrogen Loading on Radiation Sensitivity of Fiber Bragg Gratings)

  • 김종열;이남호;정현규
    • 한국정보통신학회논문지
    • /
    • 제17권10호
    • /
    • pp.2461-2465
    • /
    • 2013
  • 본 논문은 광섬유 브래그 격자의 방사선 민감도에 대한 수소로딩 공정의 영향에 대해서 연구하였다. 게르마늄이 함유된 광섬유에 수소로딩 기간을 달리하여 광섬유 브래그 격자를 제작하였다. 광섬유 브래그 격자는 총 18 kGy 감마선에 조사하여 방사선에 의한 브래그 파장의 변화를 측정하였고, 방사선 조사 후에는 반치대역폭과 온도 감도 계수의 변화를 평가하였다. 수소로딩 조건에 따라서 방사선에 의한 브래그 파장의 변화는 약 2 배 이상의 차이를 보였다.

Optical diffraction gratings embedded in BK-7 glasses by tightly focused femtosecond laser

  • Yoon, Ji Wook;Choi, Won Suk;Kim, Hoon Young;Cho, Sung-Hak
    • 한국레이저가공학회지
    • /
    • 제17권2호
    • /
    • pp.19-25
    • /
    • 2014
  • Optical embedded diffraction gratings with the bulk modification in BK-7 glass plates excited by tightly focused high-intensity femtosecond (130fs) Ti: sapphire laser (peak wavelength = 790nm) were demonstrated. The structural modifications with diameters ranging from 400nm to $4{\mu}m$ were photo-induced after plasma formation occurred upon irradiation with peak intensities of more than $1{\times}1013W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred. The maximum refractive index change was estimated to be $1.5{\times}10^{-2}$. The two optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.

  • PDF