• YAKHAK HOEJI
• /
• v.39 no.4
• /
• pp.395-400
• /
• 1995

The sorption and desorption properties of four adsorbents were evaluated for the trace enrichment of clobazam from biological samples. Graphitized carbon black(GCB) gaved the highest dynamic adsorption coefficient. Among the six organic solvents examined, acetone gave the highest desorption coefficient for the clobazam adsorbed on GCB. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the on-line monitored breakthrough curve for clobazam. When GCB as the solid adsorbent and acetone as the eluting solvent were used for the solidphase extraction of clobazam from serum, the recoveries were higher than 83% with good reproducibility in the concentration range of 20-50 $\mu\textrm{g}$/ml.

• YAKHAK HOEJI
• /
• v.36 no.2
• /
• pp.120-125
• /
• 1992

Ths sorption and desorption properties of four different solid adsorbents were evaluated for the trace enrichment of diphenylhydantoin from biological samples. Graphitized carbon black(GCB) gave the highest adsorption coefficient. And among the organic solvents examined, methanol gave the highest desorption coefficient. Using the GCB column, the optimum elution volume of the eluting solvent was evaluated from the breakthrough curve of diphenylhydantoin. The usefulness of GCB as the solid adsorbent was examined for the solid-phase extraction of diphenylhydantoin from serum in the concentration range of $20-50\;{\mu}g/ml$.

• Journal of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.79-84
• /
• 1974

Adsorption isotherms of benzene and its derivatives on Spheron 6, a graphitized carbon black, are obtained using a sensitive quartz beam microbalance. From the isotherms the molecular area of each adsorbate on Spheron 6 is calculated on the basis of nitrogen area of 16.2 $A^2$. the results show that the molecules of each species are adsorbed on Spheron 6 with the planes of benzene rings lying flat on the surfaces and doing hindered rotation.

• Journal of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.380-385
• /
• 1978

Adsorption isotherms of o-xylene on Spheron 6, a graphitized carbon black, are obtained at various temperatures using a quartz beam microbalance. BET plots are made to estimate the molecular area of o-xylene from these isotherms. On Spheron 6, the molecular area of o-xylene (m.p $-25^{\circ}C$) remains constant until the temperature is increased up to $-15^{\circ}C$, but increases abruptly between $-15^{\circ}C$ and $-14^{\circ}C$, and then again remains constant thereafter. These results are interpreted as implying that the adsorbed o-xylene molecules are flatly localized on Spheron 6 with compact packing below $-15^{\circ}C$ while they gain a rotational degree of freedom around the benzene ring at the higher temperature.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.351-357
• /
• 1976

Adsorption isotherms of benzene and p-xylene on both of Spheron 6 (a graphitized carbon black) and Alucer (Alumina) are obtained at various temperatures using a sensitive quartz beam microbalance. From these isotherms BET plots are made to obtain the molecular areas of these adsorbates. On the Spheron 6, the molecular area of p-xylene remains constant until the temperature is increased up to $19^{circ}C$, increases abruptly at $19^{circ}C$ through $19.2^{circ}C$, and then again remains constant thereafter. On the other hand, adsorbed benzene molecules give a quite temperature-independent molecular area. The results are interpreted as the adsorbed p-xylene molecules and benzene molecules are localized on the adsorbents with compact packing, while it gains a hindered-rotational degree of freedom at the expense of vibrational one at the higher temperatures. This peculiar behavior of adsorption is considered as due to the interactions between benzene rings of adsorbents and graphite surface. Molecular areas of these adsorbates on Alucer M. A. increase gradually with temperature, indicating that the adsorbed molecules are unlocalized.

• Journal of Food Hygiene and Safety
• /
• v.36 no.3
• /
• pp.220-227
• /
• 2021

Fluoroimide is a fungicide and is also used as a pesticide for persimmons and potatoes. The established fluoroimide pesticide analysis method takes a long time to perform and uses benzene, a carcinogen. In addition, a lower limit of quantification is required due to enforcement of the Positive List System. Therefore, this study aimed to improve the analysis method for residual fluoroimide to resolve the problems associated with the current method. The analytical method was improved with reference to the increased stability of fluoroimide under acidic conditions. Fluoroimide was extracted under acidic conditions by hydrogen chloride (4 N) and acetic acid. MgSO₄ and NaCl were used with acetonitrile. C₁₈ (octadecylsilane) 500 mg and graphitized carbon black 40 mg were used in the purification process. The experiment was conducted with agricultural products (hulled rice, potato, soybean, mandarin, green pepper), and liquid chromatograph-tandem mass spectrometry was used for the instrumental analysis. Recovery of fluoroimide was 85.7-106.9% with relative standard deviations (RSDs) of less than 15.6%. This study reports an improved method for the analysis of fluoroimide that might contribute to safety by substituting the use of benzene, a harmful solvent. Furthermore, the use of QuEChERS increased the efficiency of the improved method. Finally, this research confirmed the precise limit of quantification and these results could be used to improve the analysis of other residual pesticides in agricultural products.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.417-433
• /
• 2011

The study tested QuEChERS (quick, easy, cheap, effective, rugged and safe) sample preparation and HPLC-MS/ MS analysis for measurement of pesticide residues in fruit and vegetable. 240 kinds of pesticides spiked at three levels of 90, 45, 9 ng/g in lettuce and apple. For QuEChERS sample preparation, graphitized carbon black (GCB) was used for only lettuce in dispersive-SPE as absorbent. Matrix-matched standard calibration was used for quantitative analysis of HPLC-MS/MS. 218 pesticides (91%) in apple and 207 pesticides (86%) in lettuce showed recoveries in the range of 70~120% with $RSD{\leq}20%$. The lowest calibrated level (LCL) were 4.5 ng/g for 192 pesticides, 9 ng/g for 42 pesticides, 45 ng/g for 3 pesticides and 3 pesticides were not detected at all concentration levels. The results showed that the QuEChERS sample preparation and HPLC-MS/MS analysis can be applied to multi-residue analysis of pesticides in vegetables and fruits.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.140-147
• /
• 2019

An analytical method was developed for the determination of quinoxyfen in agricultural products using the QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted with 1% acetic acid in acetonitrile and water was removed by liquid-liquid partitioning with $MgSO_4$ (anhydrous magnesium sulfate) and sodium acetate. Dispersive solid-phase extraction (d-SPE) cleanup was carried out using $MgSO_4$, PSA (primary secondary amine), $C_{18}$ (octadecyl) and GCB (graphitized carbon black). The analytes were quantified and confirmed by using LC-MS/MS in positive mode with MRM (multiple reaction monitoring). The matrix-matched calibration curves were constructed using six levels ($0.001-0.25{\mu}g/mL$) and the coefficient of determination ($R^2$) was above 0.99. Recovery results at three concentrations (LOQ, 10 LOQ, and 50 LOQ, n=5) were in the range of 73.5-86.7% with RSDs (relative standard deviations) of less than 8.9%. For inter-laboratory validation, the average recovery was 77.2-95.4% and the CV (coefficient of variation) was below 14.5%. All results were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40-1993, 2003) and Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for quinoxyfen determination in agricultural commodities. This study could be useful for the safe management of quinoxyfen residues in agricultural products.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.115-123
• /
• 2019

An analytical method was developed for the determination of fenpropimorph, a morpholine fungicide, in hulled rice, potato, soybean, mandarin and green pepper using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) sample preparation and LC-MS/MS (liquid chromatography-tandem mass spectrometry). The QuEChERS extraction was performed with acetonitrile followed by addition of anhydrous magnesium sulfate and sodium chloride. After centrifugation, d-SPE (dispersive solid phase extraction) cleanup was conducted using anhydrous magnesium sulfate, primary secondary amine sorbents and graphitized carbon black. The matrix-matched calibration curves were constructed using seven concentration levels, from 0.0025 to 0.25 mg/kg, and their correlation coefficient ($R^2$) of five agricultural products were higher than 0.9899. The limits of detection (LOD) and quantification (LOQ) were 0.001 and 0.0025 mg/kg, respectively, and the limits of quantification for the analytical method were 0.01 mg/kg. Average recoveries spiked at three levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n=5) and were in the range of 90.9~110.5% with associated relative standard deviation values less than 5.7%. As a result of the inter-laboratory validation, the average recoveries between the two laboratories were 88.6~101.4% and the coefficient of variation was also below 15%. All optimized results were satisfied the criteria ranges requested in the Codex guidelines and Food Safety Evaluation Department guidelines. This study could serve as a reference for safety management relative to fenpropimorph residues in imported and domestic agricultural products.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.2
• /
• pp.82-94
• /
• 2022

BACKGROUND: Spiropidion and its metabolite are tetramic acid insecticide and require the establishment of an official analysis method for the safety management because they are newly registered in Korea. Therefore, this study was to determine the analysis method of residual spiropidion and its metabolite for the five representative agricultural products. METHODS AND RESULTS: Three QuEChERS methods (original, AOAC, and EN method) were applied to optimize the extraction method, and the EN method was finally selected by comparing the recovery test and matrix effect results. Various adsorbent agents were applied to establish the clean up method. As a result, the recovery of spiropidion was reduced when using the dispersive-SPE method with MgSO₄, primary secondary amine (PSA), graphitized carbon black (GCB) and octadecyl (C₁₈) in soybean. Color interference was minimized by selecting the case including GCB and C18 in addition to MgSO₄. This method was established as the final analysis method. LC-MS/MS was used for the analysis by considering the selectivity and sensitivity of the target pesticide and the analysis was performed in MRM mode. The results of the recovery test using the established analysis method and inter laboratory validation showed a valid range of 79.4-108.4%, with relative standard deviation and coefficient of variation were less than 7.2% and 14.4%, respectively. CONCLUSION(S): Spiropidion and its metabolite could be analyzed with a modified QuEChERS method, and the established method would be widely available to ensure the safety of residual insecticides in Korea.