• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.131-136
• /
• 2002

A design system of dies for hot extrusion of structural shapes such as Z's, L's, T's, U's and H's from aluminium alloys was developed in this study. The developed design system of dies is based of estimated die design rule system. The design rules for die design are obtained from the handbooks, plasticity theories and relevant references. The environment of the system is AutoCAD and AutoLISP, the graphic programming language was used for the configuration of the system. This system includes five major modules such as section shape design module, die opening number module, die opening layout module, die correction module and die bearing design module that are used to determine design variables. This system would be used to design of dies for hot extrusion from aluminum alloys and widely used in manufacturing course.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1864-1873
• /
• 1993

A biomechanical approach was carried out to analyze foot-floor reaction forces acting on five male subjects performing a walking task. The task analyzed was walking over an obstacle with the right bare foot. The foot-floor reaction data were measured from a force plate, and then processed using a software developed. The source program was coded in the C language for easier on-line data acquisition and graphic displays. High repeatability was found in the reaction data acquired from three trials by each subject. For obstacle height from 0 to 25 cm, the maximum in reaction force reached up to 1.048 BW in the vertical, 0.174 BW in the anterior-posterior, and 0.054 BW in the medio-lateral components, respectively. A quantity was defined by the difference between two vertical reaction values, and this quantity was found to be proportional to the obstacle height. It was also shown that the whole body motion could be predicted the measured foot-floor reaction data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.1-6
• /
• 2002

To provide an easy operation of drift prediction model in SAR(search and rescue) mission a GUI program running on Window environment has developed. Users can make choice of input data on the screen by just clicking the mouse and the prediction results of datum points and trajectories of vessels are drawn on the map. The program contains both Leeway Equation model and mathematical model. The FORTRAN language was used in programming and Lehay Winteracter 4.0 software was utilized for graphic presentation. The result of May, 2001 Busan field experiment was plotted with that of model prediction for demonstration purpose.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.110-112
• /
• 1999

Recently the substation automation is actively researched at each country. Since the substation automation is an integrated system that consist of electrical, electronic and computer technologies, performance evaluation is very important to inspect the developed system's applicable possibility for real power system. Most studies are verified using computer simulation, because it is hard to apply them to real power systems. Therefore development of a substation simulator is necessary for the performance evaluation of many application systems such as operator aid system. This paper introduces a substation simulator. An intelligent fault diagnosis and restorative control expert system is also introduced UDP/IP is applied as a protocol for data transport between expert system and SC(station computer). As to the Graphic User Interface, C++ Language and Visual Basic is used in the Windows NT operating system together with four Pentium II systems.

• Archives of design research
• /
• v.14 no.1
• /
• pp.145-158
• /
• 2001

There are posters of a tourist and traffics as like railroads and ships among Cassandre's posters, and they are common in dealing with 'travelling'. This series of travelling posters which includes many of his representative works, are important in the point of showing his unique styles and the process how Hey have been changed. In this thesis, I tried to analyze, especially in the plastic and graphic aspects, how Cassandre catch the peoples' desire and dreams of the travelling and images on the mechanical property of railroads and ships in 1920's and 1930's and how he put them into his works. I think that has revealed sense and visual language which has revealed through this analysis still give some messages to advertising media of moving images based on electronic technology today.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.6
• /
• pp.31-37
• /
• 2013

Modern graphic processors, multimedia processors and audio processors mostly use floating-point number. High-level language such as C and Java use both single precision and double precision floating-point number. In this paper, an algorithm which computes the reciprocal of double precision floating-point number using a 32 bit multiplier is proposed. It divides the mantissa of double precision floating-point number to upper part and lower part, and calculates the reciprocal of the upper part with Newton-Raphson algorithm. And it computes the reciprocal of double precision floating-point number with calculated upper part reciprocal as the initial value. Since the number of multiplications performed by the proposed algorithm is dependent on the mantissa of floating-point number, the average number of multiplications per an operation is derived from some reciprocal tables with varying sizes.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2018

A keyboard system for hands-free virtual reality head mounted display using electrooculogram (EOG) signal which occurs during the eye-blinking is proposed. This system consists of display device, gyroscope sensor, gravity sensor and electro-encephalogram (EEG) sensor, and it is implemented with Unity3D engine for system control and graphic processing. If the input language of proposed keyboard system is Korean, i.e. Hangul, the Chonjiin keyboard method is utilized; but for the English spelling, numbers or special characters, $3{\times}4$ keyboard method is used in order to solve the spatial problem. By the implemented method, it can be verified that the user can handle the keyboard input of virtual reality head mounted display with only neck movement and EOG, instead of using hands.

• Journal of Korean Academy of Nursing
• /
• v.29 no.1
• /
• pp.9-20
• /
• 1999

Postpartum depression is one of the most serious problems in maternal health because it affects not only the mother but also her family. Postpartum depression disturbs maternal -infant interaction and attachment. However, most postpartum depression patients ignore this problem and do not seek treatment. Thus this study in conducted to development of a Home-Based Multimedia Tutoring System for postpartum depression management. With this computerized system, mothers in the postpartum periods can check the level of postpartum depression using a personal computer. This system will go through each mother's data and screen those who have abnormal values. In addition this system includes intervention programs -education for nutrition, hygiene care, sleep, postpartum exercise, methods of relaxation, deep breathing, visualization, music therapy and family therapy-to relieve postpartum depression. Using this system, a mother who has a minor level of depression can manage it by herself. Computer language used in this study were html 3.2, OS used was Microsoftware NT Server 4.0, the graphic tool was Adobe Photoshop 4.0, and the Webpage tool was Notepade. The results of this study are show at internet “URL : http : //203.241.225.42/”. Finally, the author suggests that this system could be adequately applied to assessing postpartum depression and as a intervention strategy for mothers during the postpartum period. Further this study contributes to designing an appropriate postpartum depression prevention strategy.

• IE interfaces
• /
• v.10 no.3
• /
• pp.63-73
• /
• 1997

This paper presents requirements for workflow management systems supporting CITIS. We propose an architecture of global workflow management system which aims at supporting external workflow among different organizations rather than internal one. The architecture consists of five key elements, that is process definition language, process graphic design tool, control engine, status monitoring tool, and interface models. For each of these elements, implementation requirements are presented and its major functions are described. A key concept to the CITIS standard is the integration of disparate systems in distributed environment. This leads us to place a special emphasis on the interface models that can enhance the interoperability between externally participating workflow systems. Two interface models for the global workflow management system are explained. CORBA, the most widely accepted standard for distributed object management, can be adopted to facilitate the integration. World Wide Web can be used for the underlying platform on which information is exchanged and the status of processes instances is monitored. The workflow management system can provide a ready and easy access to and management of the data for CALS environments.