• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.257-265
• /
• 1999

To investigate the sequential changes in microvascular architecture and osseous regeneration during the bony healing after an application of the guided tissue regeneration method, we made artificial defects measuring $0.7cm{\times}0.3cm$ in size on femoral bones of rats measuring about 200gm and applied non-absorbable TEFE membrane at experimental sites but not at control sites. Then we observed the sequential changes and correlations between new vacuolation and bony regeneration using microvascular corrosion cast method and routine light microscopic observation at 1, 2 and 3 weeks after operation, respectively. The results showed that there were close relationships between regeneration of microvasculature and bone. In early phase, the invasion of granulation tissue at control sites delayed bony regeneration, however, in later phase, there was no remarkable differences in bony regeneration between control and experimental sites. The placement of barrier also affected in revascularization of regenerating bony defects. This is, the experimental sites showed parallel arranged nutritional vessels along long axis with well developed retiform plexus whereas the control revealed vertical invasion of microvasculature from outside of marrow space through bony defects which was also rearrange with time into parallel pattern with a vertical plexus but lesser organized than that of experimental sites. These findings suggest that the reconstruction of regenerating vasculature within the marrow cavity only may be sufficient and/or more be efficient in regeneration of bony defects.

• Journal of Periodontal and Implant Science
• /
• v.29 no.3
• /
• pp.539-553
• /
• 1999

The purpose of this 6-months study was to compare the clinical and radiographic outcomes following guided tissue regeneration treating human mandibular Class II furcation defects with a bioabsorbable BioMesh barrier(test treatment) or a nonabsorbable ePTFE barrier(control treatment). Fourteen defects in 14 patients(mean age 44 years) were treated with BioMesh barriers and ten defects in 10 patients(mean age 48 years) with ePTFE barriers. After initial therapy, a GTR procedure was done. Following flap elevation, root planing, and removal of granulation tissue, each device was adjusted to cover the furcation defect. The flaps were repositioned and sutured to complete coverage of the barriers. A second surgical procedure was performed at control sites after 4 to 6 weeks to remove the nonresorbable barrier. Radiographic and clinical examinations(plaque index, gingival index, tooth mobility, gingival margin position, pocket depth, clinical attachment level) were carried out under standardized conditions immediately before and 6 months after surgery. Furthermore, digital subtraction radiography was carried out. All areas healed uneventfully. Surgical treatment resulted in clinically and statistically equivalent changes when comparisons were made between test and control treatments. Changes in plaque index were 0.7 for test and 0.4 for control treatments; changes in gingival index were 0.9 and 0.5. In both group gingival margin position and pocket depth reduction was 1.0mm and 3.0mm; clinical attachment level gain was 1.9mm. There were no changes in tooth mobility and the bone in radiographic evaluation. No significant(p${\leq }$0.05) difference between the two membranes could be detected with regard to plaque index, gingival index, gingival margin position, pocket depth, and clinical attachment level. In conclusion, a bioabsorbable BioMesh membrane is effective in human mandibular Class II furcation defects and a longer period study is needed to fully evaluate the outcomes.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.456-463
• /
• 2004

To enhance the performance of anode-supported SOFC, single cell fabrication procedure was changed for better and resulting power generating characteristics of single cell were investigated. Liquid condensation process was employed for the granulation of NiO/YSZ powder mixture and the produced powder granules were compacted into anode green substrate by uni-axial pressing. YSZ electrolyte was printed on green substrate via screen-printing method and co-fired at 1400$^{\circ}C$ for 3 h. LSM/YSZ composite cathode of which the composition and heat treatment condition was adjusted to minimize the polarization#resistance with AC-impedance spectroscopy, was screen printed. The final single cell size from this multi-step procedure was 5${\times}$5 $\textrm{cm}^2$ and 10${\times}$10 $\textrm{cm}^2$. The maximum power densities of 5${\times}$5 and 10${\times}$10 single cells were about 0.45 W/$\textrm{cm}^2$ and 0.22 W/$\textrm{cm}^2$ at 800$^{\circ}C$, which are two times superior than those from single cells fabricated by the conventional process in previous our work.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.461-468
• /
• 2001

The effectiveness and safety of Enzyme Food, a group of dietary supplements designated by Korean Food Law, were evaluated and the possibility of HACCP (Hazard Analysis Critical Control Point) application was investigated. Chemical composition, enzyme activities and the degree of bacterial contamination in 12 samples of different brands sold in Korean market were measured. The chemical composition of the selected products varied and inconsistent to those claimed in the label description. It is known that effectiveness of Enzyme Food depends on enzyme activity, but enzyme activities of ${\alpha}-amylase$ varied from $1,793\;{\mu}g/min$ g to $159\;{\mu}g/min$ g and those of ${\beta}-amylase$ ranged from $171\;{\mu}g/min$ g to $11\;{\mu}g/min$ g. The protease activities varied from $27.57\;{\mu}g/min$ g to $0.18\;{\mu}g/min$ g. In coli-form bacterial test, positive reactions were appeared in the 50 % of the samples. Numbers of bacteria ranged from $1.3\;{\times}\;10^5\;to\;1.2\;{\times}\;10^9$. Five CCPs were identified; heating, inoculation, cultivation, drying and granulation. Consideration of HACCP system indicated that the pretreatment of raw material, checking of bacterial contamination and stability of enzyme activity during fermentation process were important factors for the quality of Enzyme Foods.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.1
• /
• pp.92-97
• /
• 2005

Inhibition of inflammatory response, acceleration of basal cell growth, and balanced synthesis of extracellular matrix (ECM) are important in healing of cutaneous open wounds. In order to evaluate the healing effects of water extracts of Radix Astragali (the root of Astragalus membranaceus (Fisch.)) on open wound at early stage, the experimental open wounds were generated on the dorsal sides of SD rats under anesthesia. The boiled-water extracts of Radix Astragali $(100{\mu}l)$, soaked into an occlusive film dressing were applied once a day for eleven consecutive days. The healing process was assessed by measuring macroscopic appearance and wound areas of the open wounds. The molecular aspects of healing process by Radix Astragali extracts were also investigated by Hematoxylin-Eosin (H-E) double staining and immunohistological staining of collagen type I in the healed skin area, implying cell density and linear alignment of the granulation tissue, and ECM synthesis and its remodeling, respectively. The Astragali radix extracts were found to significantly accelerate the cutaneous wound healing by suppressing the inflammation and stimulating the basal cell growth in wounded area, as compared to epidermal growth factor (EGF).

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.600-606
• /
• 2010

Purpose: Although traditional and current treatment strategies may demonstrate success, persistence or recurrence of difficult-to-heal wounds remain significant problems. A novel product, Hyalomatrix$^{(R)}$ (Fidia Advanced Biopolymer, Abano Terme, Italy) is a bilayer of an benzyl esterified hyaluronan scaffold beneath a silicone membrane. The scaffold delivers hyaluronan to the wound, and the silicone membrane acts as a temporary epidermal barrier. We present the results obtained with Hyalomatrix$^{(R)}$ in the treatment of difficult-to-heal wounds. Methods: From November, 2008 to March, 2010, Hyalomatrix$^{(R)}$ has been used on total 10 patients with wounds that were expected difficult to heal with traditional and other current strategies. After average 37.4 days from development of wounds, Hyalomatrix$^{(R)}$ was applied after wound debridement. On the average, Hyalomatrix$^{(R)}$ application period was 17.6 days. After average 16.5 days from removal of Hyalomatrix$^{(R)}$, skin grafts was performed. Results: In all cases, regeneration of fibrous granulation tissues and edge re-epithelization were present after the application of the Hyalomatrix$^{(R)}$. And all of the previous inflammatory signs were reduced. After skin grafts, no adverse reactions were recorded in 9 cases. But in one case, postoperative wound infection occured due to a lack of efficient fibrous tissues. In this model, the Hyalomatrix$^{(R)}$ acts as a hyaluronan delivery system and a barrier from the external environments. In tissue repair processes, the hyaluronan performs to facilitate the entry of a large number of cells into the wounds, to orientate the deposition of extracellular matrix fibrous components and to change the microenvironment of difficult-to-heal wounds. Conclusion: Our study suggests that Hyalomatrix$^{(R)}$ could be a good and feasible approach for difficult-to-heal wounds. The Hyalomatrix$^{(R)}$ improves microenvironments of difficult-to-heal wounds, reduces infection rates and physical stimulus despite of aggravating factors.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.227-232
• /
• 2010

Purpose: Continuous irrigation method is an important step in managing wound infection. V.A.C. devices have been used in intractable wounds for reducing discharge, improving local blood flow, and promoting healthy granulation tissue. We expect synergistic effects of reduced infection and more satisfactory, accelerated wound healing when using both methods simultaneously. This study evaluated continuous irrigation combined with V.A.C. appliance for treatment of infected chronic wounds. Methods: We reviewed data from 17 patients with infected intractable chronic wounds. V.A.C. device (Group A) was used in 9 patients, and V.A.C. with antibiotics irrigation (Group B) was used in 8 patients. We placed Mepitel$^{(R)}$ on the surface of wound and placed an irrigation and aspiration tube on each side. A sponge was placed on the Mepitel$^{(R)}$ and covered with film dressing. The wound was irrigated continuously with mixed antibiotics solution at the speed of 200 cc/hr and aspirated through the wall suction at the pressure of -125 mmHg. V.A.C. applied time, wound culture and wound size were compared between the two groups. Results: No complication were seen in two groups. Compared with Group A, in the Group B, V.A.C. applied time was shortened from 32.7 days to 25.6 days and showed efficacy in the reduction rate of wound size. No statistical differences were shown in bacterial reversion. Conclusion: V.A.C. appliance with continuous irrigation is an effective new method of managing infected chronic wounds and useful to reduce treatment duration and decrease wound size. Moreover it could be applied more widely to infected wound.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.220-226
• /
• 2010

Purpose: Many topical agents had been used for burn or wound treatment. An awareness of topical agents on various aspects of wound healing permits the clinician to choose the most appropriate material to advantageously control the wound process and final results. Although polydeoxyribonucleotide (PDRN) was used as a tissue repair stimulating agent in a number of human diseases, such as ulcers and burns, its wound healing effects were largely unreported. We aimed to compare the woundhealing effects of PDRN and common dressing materials on full-thickness skin defect in the mouse. Methods: Full-thickness skin defects were made on the back of mice (N=60). The mice were divided into the following 4 groups according to the dressing used for the wounds: group O (Polydeoxyribonucleotide cream), group I (Polydeoxyribonucleotide solution), group M (Medifoam$^{(R)}$), and group G (dry gauze, control group). We analyzed the gross findings, wound sizes and histological findings for the groups. Results: The rate of wound size was decreased in order of group I, group O, group M and group G. The histological findings revealed that the I group showed more reepithelialization and granulation tissue formation and less inflammatory cell infiltration than the other materials. The grade score of wound healing was increased in order of group I, group O, group M and group G. Conclusion: PDRN applicated wound dressings can be used for treating a full-thickness skin defect wounds. Considering its superior efficacy in comparison to the efficacies of other wound dressings, PDRN soaked gauze dressing should be preferentially used for the treatment of fullthickness skin wounds.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.288-293
• /
• 2005

Osmotic granule system which is one of the drug delivery systems has been developed to improve manufacturing process and other problems of tablet osmotic systems. It consists of water swellable seed layer, nifedipine drug layer, and drug release controlled membrane layer and manufactured by fluidized bed coater. The granule size and mombrane thickness can be controlled by various amounts of seed and coating solution, respectively. It could be observed that the morphology of osmotic granule was different at each coating step as well as type of coating solution. The bigger the size of granule, the slower the release rate was observed due to decreasing the total specific surface wed of granule. Also, it was observed that the increase of membrane thickness was caused to retard the dissolution of nifedipine due to decreasing the water absorption rate. The drug solubility for dissolution media is greatly affected to nifedipine release. From these results, we assured that osmotic granule can be fabricated by fluidized bed coating methods, and the appropriate release profile could be controlled by the controlling of bead size, membrane thickness and dissolution media.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.5
• /
• pp.401-418
• /
• 2000

1. Production of the artificial zeolite from coal ash Coal fly ash is mainly composed of several oxides including $SiO_2$ and $Al_2O_3$ derived from inorganic compounds remained after burning. As minor components, $Fe_2O_3$ and oxides of Mg, Ca, P, Ti (trace) are also contained in the ash. These components are presented as glass form resulting from fusion in the process of the combustion of coal. In other word, coal ash may refer to a kind of aluminosilicate glass that is known to easily change to zeolite-like materials by hydrothermal reaction. Lots of hot seawater is disposing near thermal power plants after cooling turbine generator periodically. Using seawater in the hydrothermal reaction caused to produce low price artificial zeolite by reduction of sodium hydroxide consumption, heating energy and water cost. As coal ash were reacted hydrothermally, peaks of quartz and mullite in the ash were weakened and disappeared, and new Na-Pl peaks were appeared strengthily. Si-O-Si bonding of the bituminous coal ash was changed to Si-O-Al (and $Fe^{3+}$) bonding by the reaction. Therefore the produced Na-Pl type zeolite had high CEC of 276.7 $cmol^+{\cdot}kg^{-1}$ and well developed molecular sieve structure with low concentration of heavy metals. 2. Utilization of the artificial zeolite in agro-environment The artificial zeolite(1g) could remove 123.5 mg of zinc, 164.7 mg copper, 184.4 mg cadmium and 350.6 mg lead in the synthetic wastewater. The removability is higher 2.8 times in zinc, 3.3 times in copper, 4.7 times in cadmium and 4.8 times in lead than natural zeolite and charcoal powder. When the heavy metals were treated at the ratio of 150 $kg{\cdot}ha^{-1}$ to the rice plant, various growth inhibition were observed; brownish discoloration and death of leaf sheath, growth inhibition in culm length, number of panicles and grains, grain ripening and rice yield. But these growth inhibition was greatly alleviated by the application of artificial zeolite, therefore, rice yield increased $1.1{\sim}3.2$ times according to the metal kind. In addition, the concentration of heavy metals in the brown rice also lowered by $27{\sim}75%$. Artificial Granular Zeolites (AGZ) was developed for the purification of wastewater. Canon exchange capacity was 126.8 $cmol^+{\cdot}kg^{-1}$. AGZ had Na-Pl peaks mainly with some minor $C_3S$ peaks in X-ray diffractogram. In addition, AGZs had various pore structure that may be adhere the suspended solid and offer microbiological niche to decompose organic pollutants. AGZ could remove ammonium, orthophosphate and heavy metals simultaneously. Mixing ratio of artificial zeolite in AGZs was related positively with removal efficiency of $NH_4\;^+$ and negatively with that of $PO_4\;^{3-}$. Root growth of rice seedling was inhibited severely in the mine wastewater because of strong acidity and high concentration of heavy metals. As AGZ(1 kg) stayed in the wastewater(100L) for 4days, water quality turned into safely for agricultural usage and rice seedlings grew normally.