• 공학논문집
• /
• 제2권1호
• /
• pp.5-11
• /
• 1997

입자 물질의 흐름(granular flow)은 일반 산업체의 거의 모든 공정에서 발생한다. 본 논문은 중력 하에서 경사진 슈트 (chute)를 통하여 흐르는 입자들의 속도를 측정하기 위하여 고속 디지털 영상을 이용한 방법을 논한다. 유리 입자 들이 이 실험에서 사용되었다. 유리 입자 들의 평균 속도를 측정하기 위하여 블록 매칭 (block matching)이 사용되었으며 유리입자 들의 평균속도는 변동 정규 상관 함수에 보간법을 적용함으로서 화소 간격보다 적은 단위로 측정하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.673-678
• /
• 2010

In this paper, the limit load of granular materials was evaluated considering unsaturated shear strength. The unsaturated shear strength parameters were estimated using the results from triaxial compression test and soil-water characteristic curves test. In addition, the limit load of different rates of materials was compared. Also, two important design parameters, yield and failure load were defined utilizing 2-D nonlinear finite element analysis respectively.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.403-407
• /
• 2011

Metal-insulator type, nano-granular soft magnetic films have been reviewed from the viewpoint of high frequency magnetic materials. The formation of nano-granular structure is related to the magnitude of heat of formation of intergranule materials. Variation of the ratio of granule phase to intergranule phase in the film is found to produce various characteristics in the magnetic properties of the film. The HRTEM observation reveals that neighboring granules in the film with above 60 at.% Co, contact at considerable points and the films show soft magnetic properties which are explainable in terms of the random anisotropy model for nano-crystalline materials. Addition of Ni group elements in Co-O based films enhances their anisotropy field up to 400 Oe and they exhibit excellent frequency response of permeability. Also, large electromagnetic noise suppression effect is demonstrated as one of their potential applications.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.3-7
• /
• 2008

Vibratory conveyors are widely used in industry to transport granular materials and products. A theoretical point mass model for vibratory conveying was studied. The results agreed well with experimental observations. The model theory included the resting, sliding and flight states of the material. Each state was considered separately when determining the equations of motion. For the coefficients of restitution, values of zero for the normal component and 0.8 for the tangential component were found to be appropriate for modeling the collisions of the granular particles with the conveying surface. The vibration angle had a large influence on the mode and rate of transport. There was an optimum vibration angle for a given set of conditions. The optimum vibration angle decreased and was better defined as the coefficient of friction increased. The results suggest the existence of an optimum dimensionless track acceleration (throw number), which does not support general industrial practice in which the track acceleration is limited when the feed cycle becomes erratic and unstable.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.640-649
• /
• 2010

Coarse granular materials such as gravel and crushed stone have been used as an important fill materials to large soil structure of railway, road, dam and so on. Although much studies for general soil materials have been carried out domestically, the studies for coarse materials were insufficient. Particularly, it is the level in which the study for dynamic properties(Elastic modulus and damping ratio) of coarse materials, applies the foreign country literature. This is due to the lack of large equipment for element test. But large soil structures made of coarse granular materials are generally important infrastructures. Therefore, the reliable design parameters for coarse materials should be obtained for safe and economic design, construction and maintenance. Triaxial test is the laboratory test method that is capable of controlling a confining pressure and boundary condition. In this project, we made a multi-purpose large triaxial testing system. This testing system is able to test coarse granular materials with maximum particle diameter of 100mm and support both the load control and displacement control. The load cell is installed inside of triaxial cell and the axial displacement is measured locally in order to control and measure more accurately in the small strain level. The verification test of this testing system was carried out with urethane verification specimens. So, from now on the useful information for coarse granular materials are expected to suggested by performing many tests with various material and condition.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.788-799
• /
• 2008

This study is concerned with the effects of Mo, Cr, and V addition on tensile and Charpy impact properties of API X80 linepipe steels. Four kinds of steels were processed by varying Mo, Cr, and V additions, and their microstructures and tensile and Charpy impact properties were investigated. Since the addition of Mo and V promoted to form fine acicular ferrite and granular bainite, while prohibiting the coarsening of granular bainite, it increased the strength and upper shelf energy, and decreased the energy transition temperature. The Cr addition promoted the formation of coarse granular bainite and secondary phases such as martensite-austenite constituents, thereby leading to the increased effective grain size, energy transition temperature, and strength and to the decreased upper shelf energy. The steel containing 0.3wt.% Mo and 0.06wt.% V without Cr had the highest upper shelf energy and the lowest energy transition temperature because its microstructure was composed of fine acicular ferrite and granular bainite, together with a small amount of hard secondary phases, while its tensile properties maintained excellent.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.625-630
• /
• 2008

In the bone cement composed of dense granules of $\beta-Ca_3(PO_4){_2}(\beta-TCP)$ and $Ca(H_2PO_4){_2}H_2O$, the compressive strength, setting time and temperature rise were measured to observe the degradation of cement with respect to the stored days before setting. Decreases of compressive strength and temperature rise were observed, while setting time increased with respect to the stored days. The similar trends were repeated with the increase of temperature of storage. Such a change virtually meant the fading of the character of cement and it took place only when the two starting materials were mixed during storage. The degradation could be mitigated taking advantage of granular $\beta$-TCP instead of powdery one. The formation of $CaHPO_4$, which resulted from reaction with ambient humidity, was attributed to the degradation observed during storage. Dependence of the degradation behavior on mixing and temperature during storage was discussed in terms of the driving force for reaction of cement.

• 한국분말재료학회지
• /
• 제27권6호
• /
• pp.468-476
• /
• 2020

The bone cement used for vertebroplasty must be sufficiently injectable. The introduction of granules reduces the amount of liquid required for liquefaction, implying that higher fluidity is achieved with the same amount of liquid. By employing β-tricalcium phosphate granules with an average diameter of 50 ㎛, changes in injectability are observed based on the paste preparation route and granular fraction. To obtain acceptable injectability, phase separation must be suppressed during injection, and sufficient capillary pressure to combine powder and liquid must work evenly throughout the paste. To achieve this, the granules should be evenly distributed. Reduced injection rates are observed for dry mixing and excessive granular content, owing to phase separation. All these correspond to conditions under which the clustered granules weakened the capillary pressure. The injected ratio of the paste formed by wet mixing displayed an inverted U-type shift with the granular fraction. The mixture of granules and powder resulted in an increase in the solid volume fraction, and a decrease in the liquid limit. This resulted in the enhancement of the liquidity, owing to the added liquid. It is inferred that the addition of granules improves the injectability, provided that the capillary pressure in the paste is maintained.

• 환경생물
• /
• 제21권4호
• /
• pp.405-409
• /
• 2003

To study the tolerant capacity of anaerobic granular sludge (AGS) to oxygen using semi -dynamic batch experiment, the aerating time, pH of the basal media, reductive inorganic materials, microorganism, and microorganism metabolite were investigated. When the aerating time was higher or lower than 0.5 h, the producing gas activity of sludge was lower than that of the control. The oxygen tolerance of the experimental sludge was the highest at the initial pH 7.2. The producing gas activity of sludge I was higher than that of sludge II. And storage at $4^{\circ}C$ can low the lose of the oxygen tolerance capacity of granular sludge. The producing gas activity of sludge was the highest when KI was added. The growth of aerobic microorganisms and some metabolite could increase the producing gas activity of granular sludge.

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.827-838
• /
• 1994

많은 포장구조 거동 모델은 입상재료의 거동을 묘사하는 구성방정식에 의존하고 있다. 본 연구에서는 비행장 포장의 입상재료 기층의 거동 예측을 위하여, 체적응력(bulk stress)과 팔면체 전단응력(octahedral shear stress)의 함수로 표시된 구성모델이 제안되었다. 이 모델의 특징은 비선형거동을 정확히 예측할 수 있고, 모델상수를 간단히 구할 수 있으며 전단효과에 의한 회복탄성계수의 감소현상을 나타낼 수 있다. 실내시험을 통하여 입상재료의 비선행 회복탄성거동을 관찰하였으며, 제안된 모델을 입증하기 위해 회복탄성계수를 측정하였다. 체적응력과 축차응력이 회복탄성계수의 변화에 가장 주요한 변수임이 관찰되었으며, 실내시험 결과 제안된 모델식에 의한 회복탄성계수의 예측치가 실측치와 잘 일치함을 알 수 있었다. 따라서 제안된 모델식은 비행장 포장에서 일어날 수 있는 광범위한 응력조건하의 입상재료의 회복탄성거동을 잘 묘사할 수 있음을 알 수 있다.