• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.336-342
• /
• 2005

본 연구에서는 조립토 다짐말뚝의 적용범위를 보다 연약한 지반에까지 폭넓게 활용하고자 하는 목적의 일환으로 등입도 콘크리트로 보강한 조립토 다짐말뚝공법의 적용가능성을 확인하였으며, 연구결과를 요약하면 다음과 같다. (1) 등입도 콘크리트에 대한 배합설계를 실시하고, 압축강도시험을 통한 강성 및 강도 특성의 규명과 변수위 투수시험을 통해 빈배합 콘크리트 공시체의 배수기능이 유지될 수 있음을 확인하였다. (2) 등입도 콘크리트에 대한 실내시험으로부터 도출된 강성 및 강도특성을 고려하고, 보강심도 및 치환율을 다향하게 가정한 조건하에서의 유한요소해석을 수행하여 각각의 조건에 따른 침하저감효과를 확인한 결과, 보강심도가 깊어지고 치환율이 커질수록 기존 조립도 다짐말뚝에 대한 침하억제효과가 커짐을 알 수 있었다. (3) 본 연구를 통해 등입도 콘크리트로 보강한 조립토 다짐말뚝의 적용가능성과 아울러 침하감소 효과를 파악하였으며, 기존 조립토 다짐말뚝의 침하량에 비해 보강심도, 치환율 등을 고려한 등입도 콘크리트로 보강된 조립토 다짐말뚝의 침하량이 억제되는 효과를 확인하였다. 향후에는 현장여건을 감안한 등입도 콘크리트의 다양한 배합비별 침하감소효과에 대한 규명과 함께 본 연구에서 제안된 공법의 현장적용성을 파악하기 위한 실물모형시험 또는 시험시공 등이 필요할 것으로 판단된다.

• 한국지반환경공학회 논문집
• /
• 제5권1호
• /
• pp.13-25
• /
• 2004

조립토 다짐말뚝 공법은 비교적 강성이 큰 쇄석, 자갈 및 모래 등과 같은 조립질 재료를 사용하여 원지반을 치환하여 보강하는 공법으로, 기초지반의 침하를 감소시키며, 연약지반의 지지력 증가 및 압밀배수를 촉진하고, 또한 지진에 의한 액상화의 방지에도 효과가 큰 공법으로 알려져 있으나, 국내에서는 아직 널리 사용되지 않고 있다. 본 연구에서는 유전자 알고리즘을 이용하여 군형태의 조립토 다짐말뚝에 대한 최적배치 기법을 제시하고자 한다. 분석결과, 조립토 말뚝의 배치가 중앙부에 집중될 때 조립토 군말뚝의 지지력은 증가하는 것으로 나타났다. 또한 경제적인 측면을 고려하여 조립토 군말뚝의 총중량에 대한 최적설계를 수행하였으며, 조립토 군말뚝 설계변수의 변화가 최적설계에 미치는 영향을 알아보기 위해 parametric study를 수행하였다.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.45-49
• /
• 2003

We present a brief review of recent experimental and theoretical results on new magneto-optical phenomena in magnetic granular metal-insulator alloys with tunnel-type magnetoresistance, focusing on magnetorefractive effect and cubic nonlinear magneto-optics.

• KSBB Journal
• /
• 제29권5호
• /
• pp.353-360
• /
• 2014

This study targets the pollutant removal of secondary effluent from final clarifiers in wastewater treatment plant using silver nanoparticles on activated carbon. The removal efficiency and treatment characteristics of pollutant are anlayzed by perfoming experiments using granular activated carbon with silver nanoparticles and ordinary granular activated carbon. The specific surface area of granular activated carbon with silver nanoparticles is smaller than that of ordinary granular activated carbon. However, the removal efficiency of $COD_{Mn}$, T-N and T-P in experiments using activated carbon with silver nanoparticles are higher than that in experiment using ordinary granular activated carbon. That means the case of activated carbon with silver nanoparticles is much better at treatment activity. In addition, activated carbon with silver nanoparticles has antimicrobial activity because there is no microbe on the surface of it after experiments.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.721-724
• /
• 2005

With the advantages of large vibration energy dissipation of structures, the granular materials are used as vibration and acoustic treatments. In this case of vibro acoustic controls, a finite dynamic strength of the solid component (frame) is an important design factor. The dynamic stiffness of hollow cylindrical beams containing porous and granular materials as damping treatment was measured. Using the Rayleigh-Ritz method, the effects of damping materials on the dynamic characteristics of beams were investigated. The results suggested that the acoustic structure Interaction between the frame and the structure enhances the dissipation of the vibration energy significantly. The same methods were applied also to vibration control of sandwich panels. By filling the cavities of honeycomb cores using unconsolidated granular materials, its sound transmission toss was improved significantly.

• 한국지반공학회논문집
• /
• 제17권6호
• /
• pp.207-213
• /
• 2001

조밀한 건조조립토와 건설재료(콘크리트재)사이의 경계에서의 동마찰계수를 구하기 위하여 진동대를 사용하여 동적직접전단시험을 실시하였다. 조밀한 건조조립토와 건설재료사이의 동마찰계수는 본 연구에서 고려한 미끄러짐 속도의 범위안에서는 크게 변하지 않음을 알 수 있었다. 그리고 동마찰계수는 조립토의 평균입경이 증가함에 따라 감소하였고, 이에 대한 관계식을 제안하였다. 또한 이 계수를 같은 조립토에 대하여 실시한 평면변형률시험으로 얻어진 내부마찰각으로부터의 마찰계수와 비교하였다.

• 환경생물
• /
• 제21권4호
• /
• pp.405-409
• /
• 2003

To study the tolerant capacity of anaerobic granular sludge (AGS) to oxygen using semi -dynamic batch experiment, the aerating time, pH of the basal media, reductive inorganic materials, microorganism, and microorganism metabolite were investigated. When the aerating time was higher or lower than 0.5 h, the producing gas activity of sludge was lower than that of the control. The oxygen tolerance of the experimental sludge was the highest at the initial pH 7.2. The producing gas activity of sludge I was higher than that of sludge II. And storage at $4^{\circ}C$ can low the lose of the oxygen tolerance capacity of granular sludge. The producing gas activity of sludge was the highest when KI was added. The growth of aerobic microorganisms and some metabolite could increase the producing gas activity of granular sludge.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.181-188
• /
• 2004

Composite soil methods among granular pile merhods that we could improve soft ground of fine soil particles by, have permeability as one of fundamental principals. The catual state, that voids of sand or gravel, etc. of granular soil as drainage materials are clogged by fine soil particles, is 'clogging'. In this study, it is analysed that using sand or gravel, etc. of granular soil as drainage materials, experiment are made by clogging tester on several condition.

• 상하수도학회지
• /
• 제19권6호
• /
• pp.781-790
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. Many of the problems occurring in the GAC process are associated with the operation goal and performance. The purpose of this study were to evaluate the design, operation, and performance of granular activated carbon process in D water treatment plant. The optimal operation conditions of GAC process such as backwashing condition, granular activated carbon replacement time were discussed. The design, operation and performance of GAC process is influenced by their raw water characteristics and placement within the treatment process sequence. A critical analysis of plants experience and the information from the literature identifies the effectiveness of GAC process and indicates where modifications in design and operation could lead to improved performance. It would be useful to evaluate and optimize the GAC process in other treatment plant.

• Geomechanics and Engineering
• /
• 제15권1호
• /
• pp.687-694
• /
• 2018

To investigate the crushing behaviour of coarse granular materials, a specifically designed, large-scale simple shear apparatus with eight-staged shearing rings was developed. A series of monotonic simple shear tests were conducted on two kinds of coarse granular materials under different vertical stresses and large shear strains. The evolution of the particle breakage during the compression and simple shearing processes was investigated. The results show that the amount of particle breakage is related to the particle hardness and the state of the stresses. The amount of particle breakage is greater for softer granular materials and increases with increasing vertical stresses. Particle breakage may tend towards a critical value during both the compression and the shearing processes. Particle breakage mainly occurs during the processes of confined compression and contraction.