• Journal of Plant Biotechnology
• /
• v.38 no.2
• /
• pp.176-185
• /
• 2011

Rice is one of the most important crop in the world, in particular for food resources. With its small genome size of 383 Mb, the Oryza sativa is a model plant for genome research. Indeed, it's grain provides human with a source of carbohydrates and proteins. Rice grain has relatively low protein contents (around 8%) compared to other legume seeds (around 40%). Osborne classified seed proteins into water soluble albumin, salt soluble globulin, alcohol soluble prolamin and acidic/alkaline solution soluble glutelin. Glutelin and prolamin are the major storage proteins in rice. For the gene expression study of seed storage proteins, we analyzed 33,192 EST clones at immature stages in a rice cultivar (Oryza sativa L. cv. 'Ilpum'). Based on the expression analysis, we cloned 11 glutelin genes and figured out the 8 genes are located on Chromosome 2. The expression of glutelin genes appears to be about 28.2% of total level in immature seeds. Interestingly, glu-04 is duplicated as inverted sequences on the same chromosomes as far 4.5 kb. Our results indicate that glutelin genes, evolutionarily, were replicated on the chromosome and thus expressed as specific manners. In a whole protein composition analysis, glu05 (type B7) contains the highest lysin contents (4.51%) among the 11 rice glutelin genes. It will be an interesting future work to increase lysin contents by the gene overexpressor strategy with the aim of improved diet nutritionally fortified.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.13-27
• /
• 2016

The characteristics of the rock cleavage inherent in Jurassic granite from Geochang were analysed. The phases of distribution of microcrack spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. The evaluation for the six directions of rock cleavages was performed using nine parameters such as (1) frequency of microcrack spacing(N), (2) frequency ratio(${\leq}1mm$ and 4 mm >) to total spacing frequency(N:191), (3) spacing ratio(${\leq}1mm$) to total spacing(118.49 mm), (4) mean spacing($S_{mean}$), (5) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$), (6) density of spacing, (7) median spacing, (8) reduction ratio of spacing frequency to length frequency and (9) magnitude of exponent(${\lambda}$ and b) related to the distribution type of diagram. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of (I) parameters(1, 2 and 3), (II) parameters(4, 5 and 6), (III) parameter(7), (IV) parameter(8) and (V) parameter(9) show the various orders of H(hardway, H1+H2) < G(grain, G1+G2) < R(rift, R1+R2), R < G < H, R < H < G, G < H < R and H < G < R, respectively. On the contrary, the values of the above four groups(I~IV) of parameters for three planes show reverse orders. This type of correlation analysis is useful for discriminating three quarrying planes. Six spacing-cumulative frequency diagrams were arranged in increasing order on the value of main parameter($S_{mean}-S_{median}$). These diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, the above six diagrams can be summarized in order of rift(R1+R2) < grain(G1+G2) < hardway(H1+H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, the above main parameter could provide advanced information for prediction the order of arrangement among the diagrams.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.84-101
• /
• 1989

An accurate measurement of size, surface area and volume of agricultural products is essential in many engineering operations such as handling and sorting, and in heat transfer studies on heating and cooling processes. Little information is available on these properties due to their irregular shape, and moreover very little information on the rough rice, soybean, barley, and wheat has been published. Physical dimensions of grain, such as length, width, thickness, surface area, and volume vary according to the variety, environmental conditions, temperature, and moisture content. Especially, recent research has emphasized on the variation of these properties with the important factors such as moisture content. The objectives of this study were to determine physical dimensions such as length, width and thickness, surface area and volume of the rough rice, soybean, barley, and wheat as a function of moisture content, to investigate the effect of moisture content on the properties, and to develop exponential equations to predict the surface area and the volume of the grains as a function of physical dimensions. The varieties of the rough rice used in this study were Akibare, Milyang 15, Seomjin, Samkang, Chilseong, and Yongmun, as a soybean sample Jangyeobkong and Hwangkeumkong, as a barley sample Olbori and Salbori, and as a wheat sample Eunpa and Guru were selected, respectively. The physical properties of the grain samples were determined at four levels of moisture content and ten or fifteen replications were run at each moisture content level and each variety. The results of this study are summarized as follows; 1. In comparison of the surface area and the volume of the 0.0375m diameter-sphere measured in this study with the calculated values by the formula the percent error between them showed least values of 0.65% and 0.77% at the rotational degree interval of 15 degree respectively. 2. The statistical test(t-test) results of the physical properties between the types of rough rice, and between the varieties of soybean and wheat indicated that there were significant difference at the 5% level between them. 3. The physical dimensions varied linearly with the moisture content, and the ratios of length to thickness (L/T) and of width to thickness (W/T) in rough rice decreased with increase of moisture content, while increased in soybean, but uniform tendency of the ratios in barley and wheat was not shown. In all of the sample grains except Olbori, sphericity decreased with increase of moisture content. 4. Over the experimental moisture levels, the surface area and the volume were in the ranges of about $45{\sim}51{\times}10^{-6}m^2$, $25{\sim}30{\times}10^{-9}m^3$ for Japonica-type rough rice, about $42{\sim}47{\times}10^{-6}m^2$, $21{\sim}26{\times}10^{-9}m^3$ for Indica${\times}$Japonica type rough rice, about $188{\sim}200{\times}10^{-6}m^2$, $277{\sim}300{\times}10^{-9}m^3$ for Jangyeobkong, about $180{\sim}201{\times}10^{-6}m^2$, $190{\sim}253{\times}10^{-9}m^3$ for Hwangkeumkong, about $60{\sim}69{\times}10^{-6}m^2$, $36{\sim}45{\times}10^{-9}m^3$ for Covered barley, about $47{\sim}60{\times}10^{-6}m^2$, $22{\sim}28{\times}10^{-9}m^3$ for Naked barley, about $51{\sim}20{\times}10^{-6}m^2$, $23{\sim}31{\times}10^{-9}m^3$ for Eunpamill, and about $57{\sim}69{\times}10^{-6}m^2$, $27{\sim}34{\times}10^{-9}m^3$ for Gurumill, respectively. 5. The increasing rate of surface area and volume with increase of moisture content was higher in soybean than other sample grains, and that of Japonica-type was slightly higher than Indica${\times}$Japonica type in rough rice. 6. The regression equations of physical dimensions, surface area and volume were developed as a function of moisture content, the exponential equations of surface area and volume were also developed as a function of physical dimensions, and the regression equations of surface area were also developed as a function of volume in all grain samples.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.1-7
• /
• 2004

Tin plating on component finishes may grow whiskers under certain conditions, which may cause failures in electronics equipment. To protect the environment, 'lead-free' among component finishes is being promoted worldwide. This paper presents the evaluation results of whiskers on two kinds of lead-free plating materials at the plating temperature and under the reliability test. The rising plating temperature caused increasing the size of plating grain and shorting the growth of whisker. The whisker was grown under the temperature cycling the bent type in matt Sn plating and striated type in malt Sn-Bi. The whisker growth in Sn-Bi plating was shorter than that in Sn plating. In FeNi42 leadframe, the $7.0{\~}10.0{\mu}m$ diameter and the $25.0{\~}45.0{\mu}m$ long whisker was grown under 300 cycles. In the 300 cycles of Cu leadframe, only the nodule(nuclear state) grew on the surface, and in the 600 cycles, a $3.0{\~}4.0{\mu}m$ short whisker grew. After 600 cycles, the ${\~}0.34{\mu}m$ thin $Ni_3Sn_4$ formed on the Sn-plated FeNi42. However, we observed the amount of $0.76{\~}1.14{\mu}m$ thick $Cu_6Sn_5$ and ${\~}0.27{\mu}m$ thin $Cu_3Sn$ intermetallics were observed between the Sn and Cu interfaces. Therefore, the main growth factor of a whisker is the intermetallic compound in the Cu leadframe, and the coefficient of thermal expansion mismatch in FeNi42.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.527-533
• /
• 2006

The purpose of this study is to improve the culturability of a indica type rice cultivar, IR 36, using DNA marker associated with the ability of plant regeneration in anther and seed culture. The varietal difference of ability of callus formation and plant regeneration was investigated in anther and seed culture of 8 rice cultivars. Three japonica rice cultivars showed to have better culturability than those of tongil and indica type genotypes. But two indica/japonica lines, 'MGRI 079' and 'MGRI 036', which were selected to have good culturability in previous study showed the highest regenerability (20%) in anther culture of 8 rice cultivars. Thirty four $BC_2F_4$ lines were selected by marker screening using RZ400 for 100 $BC_2F_4$ lines derived from a cross $'MGRI\;079/IR\;36^{^*3}'$. The frequency of callus formation of 30 $BC_2F_4$ lines was higher than those of 'IR 36' in anther culture of the selected $BC_2F_4$ lines. The ability of plant regeneration of 15 lines was higher than that of 'IR 36' in the seed culture of 34 $BC_2F_4$ lines. A promising line, $BC_2F_4-28$, was selected to have better culturability in the anther and seed culture of the $BC_2F_4$ lines. The heading date and grain shape of the $BC_2F_4-28$ was similar to 'IR 36'. In seed culture of 50 $BC_4F_3$ lines derived from a rice cross $'MGRI\;079/IR\;36^{^*5}'$, 11 lines including $BC_4F_3-3$ showed to have higher regenerability compared with 'IR 36'. The highest frequency of plant regeneration (11%) was obtained from $BC_4F_3-46$ in seed culture of the $BC_4F_3$ lines.

• Korean Journal of Environmental Biology
• /
• v.19 no.4
• /
• pp.313-320
• /
• 2001

An ecological study was conducted to determine the geographic distribution, community structure, and habitat characteristics of eelgrass, Zostera marina L. beds along the southern coast of Korea. Plants and sediment samples were collected during June 2000 and December 2000 on twenty-eight locations, including two Cheju Island stations, which were used to compare morphological characteristics with habitat types. Z. marina populations existed from the intertidal to subtidal zone, mainly in the bays along the coast and the island, the barrier reef, and the estuary where the water depth was 0.5${\sim}$8.0m. Salinity range in Z. marina beds ranged 18.2 to 34.5%$_o$. Sediments of Z. marina beds contained 49.7${\sim}$99.1% of sand and were classified into sand, muddy sand, and sandy mud. Mean grain size varied from 1.5 to 4.4 phi. Height of vegetation shoots varied from 54.7 to 171.4 cm, depending on water depth, location, substrata and habitat types. quantitative morphological features that enabled recognition of the two phonetic groups were short-narrow leaf type and long-broad leaf type. Statistical analysis indicated that biomass of individual plants and their quantitative morphological characteristics were significantly correlated.

• Journal of Nutrition and Health
• /
• v.34 no.1
• /
• pp.30-38
• /
• 2001

This research was conduced to 1) examine the influence of milk group intake on the dietary, considering dietary diversity and nutrient adequacy, 2) identify which foods truly contribute to the intake of specific nutrients 3) point out the dietary problems of this age group. The subjects were 664(male 357, female 307) healthy toddlers of the ages of 12-36 months, who had neither been taking any medicine-type supplements nor had any diseases that affect the dietary intakes, chosen among the outpatients of university and private hospitals in Seoul and Kyonggi province during Mach-August, 1999. The 24 hour recall method and CAN Pro(food analysis program) were used to analyze the amount of nutrient intake. The grouping of the subjects for the analysis by monthly age was based on the 98 Korean Child growth standard. The results that the milk group intake showed significant negative correlations with the grain group(r=-0.194, p<0.01), the vegetable group(r=-0.115, p<0.01) and the fruit group(r=-0.125, p<0.01). It also showed that the more the milk group intake, the lower the Dietary Diversity Score(r=-0.131, p<0.01), and the more the intake of raw milk, the more dificient the intake of iron(r=-0.211, p<0.01), vitamin A(r=-0.169,p<0.01), vitamin B$_1$(r=-0.078, p<0.05) and vitamin C(r=-0.187, p<0.01). Foods contributory to nutrient intake for of 12-14 months of were mostly infant formula, and the contribution ratio was high. In the age of 15-17 months, the subjects obtained most of the nutrients from raw milk., liquid-type yoghurt, soybean milk, cooked rice, etc. As for iron intake, the age of 21-23 month obtained the most from ionic drinks, and 24-29 months from raw milk, chocolate cakes, ionic drinks, etc. Though the NAR(Nutrient Adequacy Ratio) and MAR(Mean Adequacy Ratio) generally tended to increase accordingly with the DDs, as for nutrients Ca, vitamin A, vitamin B$_1$, and vitamin C the NAR marked the highest when the DDS marked the lowest(due to infant formula). And for iron, even when the DDS was 5 the NAR value was low. Im conclusion, the more the milk group intake, the lower was the dietary diversity. High dependency on infant formula and others from milk group over the age of 12 months proved to result in a decrease of nutritious solid food intake, iron deficiency and a low dietary diversity score, which can lead to an unbalanced diet. Therefore, nutrition education towards mothers/caretakers of toddler is of urgent need, in order to reduce the fluid milk group intake of low nutritional density and to provide various solid foods the children. (Korean J Nutrition 34(1):30-38, 2001)

• The Journal of the Petrological Society of Korea
• /
• v.23 no.2
• /
• pp.61-73
• /
• 2014

The dextral strike-slip Yecheon Shear Zone of (E)NE-(W)SW trend is developed in the Pukhumyeon-Pyeongeunmyeon area, Gyeongsangbukdo, in the central part of Sobaeksan Massif, Korea which mainly consists of Precambrian metasedimentary rocks and Mesozoic granite. This paper researched the relative formation time, the deformation temperature, and the distribution of ultramylonite zone of Yecheon Shear Zone from the analysis of their deformed rock structures and microstructures. There are the mylonite foliation and stretching lineation by shear deformation, and the (E)SE-vergence gentle plunging, moderately inclined tight fold defined by the gneissosity and mylonite foliation as ductilely deformed main rock structures. Flame perthites, myrmekites, microfractures, microkinks, kinkband, and undulatory extinction are recognized as characteristic microstructures in feldspars during ductile shear deformation. Patterns of c-axis fabrics of recrystallized quartz aggregate display single girdle and type I crossed girdle where the rhomb and basal slip systems are predominant. The shearing senses on sense-of-shear plane show top-to-the-NE and top-to-the-SW on the predominant NW-dipping and subordinate SE-dipping mylonite foliations, respectively. These characteristic rock structures and microstructures suggest that the Yecheon ductile shearing occurred under $350{\sim}450^{\circ}C$ deformation temperature after the tight folding. The (E)NE trending ultramylonite zone of Yecheon Shear Zone, which passes through the Pulnobong and the north part of Pakdalsan, is established from the zonal distribution of Precambrian metasedimentary rocks and the grain-size distribution of feldspars in the Precambrian metasedimentary rocks and quartzs in the Mesozoic granite.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.1
• /
• pp.27-32
• /
• 2001

The effect of $V_2O_5$, a donor-type dopant on the degradation of quality factor of ($Zr_{0.8}, Sn_{0.2})TiO_4$was compared with Ta$_2$O$_{5}$ doped ($Zr_{0.8}, Sn_{0.2})TiO_4$ in terms of microstructure, electrical conductivity, and oxidation state of the dopant. It is well known that the addition of the donor type species such as $Ta_2O_5,Nb_2O_5, Sb_2O_5, WO_{3}$, increases the quality factor of ($Zr_{0.8}, Sn_{0.2})TiO_4$due to decrease the oxygen vacancy concentration. Unlike other dopants, however, the addition of $V_2O_5$ decreased the quality factor. The degradation of quality factor of ($Zr_{0.8}, Sn_{0.2})TiO_4$was resulted from the formation of grain boundary phase and $V_2O_5$rich fiber shaped secondary phase, and the increasing the oxygen vacancy concentration due to unstability of oxidation state of vanadium ions in ($Zr_{0.8}, Sn_{0.2})TiO_4$ceramic.c.

• Journal of the Korean earth science society
• /
• v.22 no.2
• /
• pp.120-129
• /
• 2001

A sand shoal (1300 m long and 400 m wide) with an orientation of north-south is formed on the lower tidal flat of Gomso Bay, southwestern coast of Korea. Surface bedforms, sedimentary structures, sedimentation rate, grain size distribution and can-corer sediments have been measured and analysed along the sand shoal proper zone B and its offshore zone A and onshore zone C during the period of 14 months. These three zones can be differentiated based on sedimentological characteristics: A zone - fine sand (3${\varphi}$ mean), linguoid-type ripples, 70 mm/month in sedimentation rate and no bioturbation, B zone - medium sand (2.5${\varphi}$ mean), dunes (4${\sim}$5 m in wavelength), 30 mm/month in sedimentation rate and no bioturbation, and C zone - coarse silt (5${\varphi}$ mean), sinuous-type ripples, 10 mm/month in sedimentation rate and well-developed bioturbation. These characteristics indicate that the zone C represents a relatively low-energy regime environment whereas the zone A corresponds to a relatively high-energy environment. The zone B would play an important role for a barrier to dissipate the approaching wave energy, resulting in maintaining of low-energy conditions in the inner part of Gomso-Bay intertidal flat behind.