• 한국환경보건학회지
• /
• 제38권5호
• /
• pp.424-430
• /
• 2012

Objective: The purpose of this study was to present the standard deviation of the elemental normalization of concentration of selected heavy metals in the surface sediment of Lake Paldang. Methods: Grain size dependency of selected heavy metal concentrations in the surface sediments of Lake Paldang was analyzed by the extrapolation method. The heavy metal concentrations were the sum of all fractions. Results: Cd and Cu showed an increase of the coefficient of determination($r^2$) in the fractional content of particle size, from <256 ${\mu}m$ to <20 ${\mu}m$, and a decrease from <20 ${\mu}m$ to <1 ${\mu}m$. The normalized concentration of Cd and Cu by extrapolation at 50% <20 ${\mu}m$ were 0.8 mg/kg, 37.0 mg/kg, 57.6 mg/kg and 201.7 mg/kg respectively. Conclusions: The normalized concentrations in the sediment of Lake Paldang are 1.5-2.0 times higher than mean average concentration. We concluded that in interpretation of heavy metal concentration in the sediment of Lake Paldang, normalization of grain size dependency should be considered.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.69-74
• /
• 2008

The effects of $SiO_2$ impurity on the high temperature resistivities of AIN ceramics have been investigated. When $SiO_2$ was added into 1 wt% $Y_2O_3$-doped AIN, DC resistivities have decreased and electrode polarizations disappeared. Impedance spectroscopy showed two semi-circles at $600^{\circ}C$, which were attributed to grain and grain boundary, respectively. $SiO_2$ doping had more significant effects on the grain resistivity than grain boundary resistivity, implying that doped Si acted as a donor in AIN lattice. In addition, voltage dependency of DC resistivity was observed, which might be related to dependency of size of grain boundary semi-circle on the bias voltage in impedance spectroscopy.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.82-87
• /
• 2003

Stress corrosion cracking of Alloy 600 and Alloy 690 has been studied with a C-ring specimen in 1%, 10% and 40% NaOH at $315^{\circ}C$. SCC test was performed at 200 mV above corrosion potential. Initial stress on the apex of C-ring specimen was varied from 300 MPa to 565 MPa. Materials were heat treated at various temperatures. SCC resistance of Ni-$_\chi$Cr-10Fe alloy increased as the Cr content of the alloy increased if the density of an intergranular carbide were comparable. SCC resistance of Alloy 600 increased in caustic solution as the product of coverage of an intergranular carbide in grain boundary, intergranular carbide thickness and Cr concentration at grain boundary increased. Low temperature mill annealed Alloy 600 with small grain size and without intergranular carbide was most susceptible to SCC. TT Alloy 690 was most resistant to SCC due to the high value of the product of coverage of an intergranular carbide in grain boundary, intergranular carbide thickness and Cr concentration at grain boundary. Dependency of SCC rate on stress and NaOH concentration was obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1775-1778
• /
• 2006

Through baking process on an interlayer, known as hole transporting layer, varying baking temperature up to 300 degree, which is considered as extremely high for polymer light emitting device (PLED) system, we found interesting relationship between packing density and morphology affecting device performance. Granular morphology shows that as temperature increases, grain size is getting smaller to pack closely and make interlayer harden. Such denser interlayer has temperature dependency of its own mobility, even without clear evidence of degradation of material itself. Its fact proven in a single film also reflects on multilayered PLED's performance like IVL, efficiency, lifetime. It's found that, especially, to enhance lifetime is related with thermal stability of interlayer and its mobility dependency to meet better charge balance. Therefore, it gives us understanding not only baking effect of interlayer, but also material & device designing guide to enhance lifetime.

• Steel and Composite Structures
• /
• 재36권6호
• /
• pp.631-642
• /
• 2020

This paper studies nonlinear stability behavior of a nanocrystalline silicon curved nanoshell considering strain gradient size-dependency. Nanocrystallines are composite materials with an interface phase and randomly distributed nano-size grains and pores. Imperfectness of the curved nanoshell has been defined based on an initial deflection. The formulation of nanocrystalline nanoshell has been established by thin shell theory and an analytical approach has been used in order to solve the buckling problem. For accurately describing the size effects related to nano-grains or nano-pores, their surface energies have been included. Nonlinear stability curves of the nanoshell are affected by the size of nano-grain, curvature radius and nano-pore volume fraction. It is found that increasing the nano-pore volume fraction results in lower buckling loads.

• 한국음향학회지
• /
• 제22권8호
• /
• pp.652-659
• /
• 2003

사질로 이루어진 평탄한 경계면에서 수평입사각 (25°, 40°, 65°, 80°)에 따른 고주파(40∼120 kHz) 반사손실 측정 실험을 수조 내에서 수행하였다. 5×5×5 m 크기의 수조는 바닥을 두께가 0,5m 이고 평균입도가 0.5 ø인 사질 퇴적물로 채웠으며 퇴적층 경계면은 평탄하게 조성하였다. 측정된 주파수별 수평입사각에 따른 반사손실은 고주파 해저면 반사손실 모델인 APL-UW 모델 (Mourad & Jackson, 1989)과 비교하였다. 60 kHz 이하 주파수의 경우 모델과 실측치가 거의 일치하였으나 70 kHz 이상의 경우에는 주파수가 증가함에 따라 2∼3dB씩 증가하는 결과를 보였다. 70 kHz 이상의 경우 모델과 실측치 간의 차이는 모델에서 다루지 않는 거칠기 (입도)의 수직 크기 때문이며 고주파로 갈수록 산란이론의 레일리 인자 (Rayleigh parameter)의 값이 증가하여 거칠기에 의한 산란효과를 포함하기 때문이다. 따라서 평탄한 해저면일지라도 사질과 수층으로 이루어진 경계면에서의 반사손실모델은 입도분포의 신뢰구간 내에서 갖는 거칠기 영향에 의한 주파수의 종속성을 고려하여야한다.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.24-29
• /
• 2000

MgO thin films were deposited on soda lime glass substrates by rf magnetron sputtering using a MgO target at various oxygen flow ratios in order to probe the relationship between MgO film properties and discharge characteristics. MgO films have a tendency to form microstructures with a preferred growth orientation of (200) with increasing oxygen flo ration up to 0.1 $O_2$/(Ar+$O_2$). MgO film obtained at 0.1[$O_2$/(Ar+$O_2$)] was found to be fully stoichiometric. The stoichiometric MgO film was observed to have relatively very clean surface and grains of large size and contain almost no hydroxyl group. The AC PDP with fully stoichiometric MgO film showed lower firing and sustain voltages than those with magnesium-rich or oxygen-rich MgO films, being largely attributed to the larger grain size and the minimized hydroxyl group.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.61-67
• /
• 2020

BiFeO₃ with perovskite structure is a well-known material that has both ferroelectric and antiferromagnetic properties called multiferroics. However, leaky electrical properties and difficulty of controlling stoichiometry due to Bi volatility and difficulty of obtaining high relative density due to high dependency on the ceramic process are issues for BiFeO₃ applications. In this work we investigated the sintering behavior of samples with different stoichiometries and sintering conditions. To understand the optimum sintering conditions, nonstoichiometric Bi_1±xFeO_3±δ ceramics and Ti-doped Bi_1.03Fe_1-4x/3Ti_xO₃ ceramics were synthesized by a conventional solid-state route. Dense single phase BiFeO₃ ceramics were successfully fabricated using a two-step sintering and quenching process. The effects of Bi volatility on microstructure were determined by Bi-excess and Ti doping. Bi-excess increased grain size, and Ti doping increased sintering temperature and decreased grain size. It should be noted that Ti-doping suppressed Bi volatility and stabilized the BiFeO₃ phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.561-566
• /
• 2005

Polycrystalline silicon films were deposited using hot wire CVD (HWCVD). The deposition of silicon thin films was approached by the theory of charged clusters (TCC). The TCC states that thin films grow by self-assembly of charged clusters or nanoparticles that have nucleated in the gas phase during the normal thin film process. Negatively charged clusters of a few nanometer in size were captured on a transmission electron microscopy (TEM) grid and observed by TEM. The negatively charged clusters are believed to have been generated by ion-induced nucleation on negative ions, which are produced by negative surface ionization on a tungsten hot wire. The electric current on the substrate carried by the negatively charged clusters during deposition was measured to be approximately $-2{\mu}A/cm^2$. Silicon thin films were deposited at different $SiH_4$ and $H_2$ gas mixtures and filament temperatures. The crystalline volume fraction, grain size and the growth rate of the films were measured by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The deposit ion behavior of the si1icon thin films was related to properties of the charged clusters, which were in turn controlled by the process conditions. In order to verify the effect of the charged clusters on the growth behavior, three different electric biases of -200 V, 0 V and +25 V were applied to the substrate during the process, The deposition rate at an applied bias of +25 V was greater than that at 0 V and -200 V, which means that the si1icon film deposition was the result of the deposit ion of charged clusters generated in the gas phase. The working pressures had a large effect on the growth rate dependency on the bias appled to the substrate, which indicates that pressure affects the charging ratio of neutral to negatively charged clusters. These results suggest that polycrystalline silicon thin films with high crystalline volume fraction and large grain size can be produced by control1ing the behavior of the charged clusters generated in the gas phase of a normal HWCVD reactor.

• 한국제4기학회지
• /
• 제5권1호
• /
• pp.15-31
• /
• 1991

우리나라 주변해역의 퇴적물에 관한 연구는 이제까지 퇴적학적 및 광물학적 측면에 집중되어 온 까닭에 그 지화학적 특성에 대해서는 알려진 바가 매우 제한되어 있으며, 특히 동해 대륙붕의 경우는 더욱 그러하다. 이와 같은 지식의 빈 틈을 채우기 위하여 한국 동남해역의 대륙붕과 대륙사면에서 채취된 90개 표층퇴적물을 대상으로 그 주성분원소와 수종의 미량성분들을 분석하였다. 이 분석결과를 바탕으로 이들 화학원소들의 분포양상과 그 분포에 영향을 미치는 여러 조절요인들이 논의되었다. 연구지역 퇴적물에서 화학원소들의 분포에 가장 큰 영향을 미치는 요인은 퇴적물 입도인 것으로 밝혀졌으며, Ca과 K를 제외한 대부분 주성분원소들과 Sr 및 Ba를 제외한 미량금속들의 함량은 모두 퇴적물의 입도와 밀접한 상관관계를 나타냈다. 반면, 퇴적물 내 Ca과 Sr의 함량은 주로 탄산염에 의해 조절되어지며, K의 경우에는 장석과 illite가 큰 영향을 미치는 것으로 여겨진다. 한편, K 함량과 어느 정도의 관련성을 나타내는 Ba의 경우에는 칼리장석의 영향이 중요할 것으로 사료된다. 분석된 화학성분들의 연구지역 퇴적물 내 함량은 모두 자연상태의 범위를 벗어나지 않는 것으로 판단되며, 그 공간적 분포양상은 대부분 입도분포나 혹은 탄산염분포(Ca과 Sr)의 그것과 거의 동일하게 나타난다. 한편, metal/Al 비율은 퇴적물 내 금속함량에서 입도의 영향을 보정할 수 있으며, 이 비율을 이용하여 연구지역 남부 연안역의 퇴적물에 미약하나마 인위적 오염의 가능성이 있음을 제시하였다.