• Korean Journal of Metals and Materials
• /
• v.49 no.2
• /
• pp.104-111
• /
• 2011

An ultrafine grained Mg-9Al-1Zn magnesium alloy with the mean grain size less than $1{\mu}m$ was produced by using high-ratio differential speed rolling. The processed alloy exhibited excellent superplasticity at relatively low temperatures. The micro-forming tests were carried out using a micro-forging apparatus with micro V-grooved shaped dies made of silicon and the micro-formability was evaluated by means of micro-formability index, $R_f$ ($=A_f/A_g$, $A_f$: formed and inflowed area into the V-groove, $A_g$: area of the V-groove). The $R_f$ value increased with temperature up to $280^{\circ}C$ and then decreased beyond $300^{\circ}C$. The decrease of the $R_f$ value at $300^{\circ}C$ was attributed to the accelerated grain coarsening. Increasing the micro-forging pressure increased the $R_f$ values. At a given die geometry, die filling ability decreased as the die position moved away from the die center to the end. FEM simulation predicted this behavior and a method of improving this problem was proposed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.205-209
• /
• 2018

'Saemimyeon,' a Tongil-type rice variety (Indica x Japonica), containing high amylose content, is suitable for rice noodle production. Currently, the major parts of the rice processing industry that include products such as rice flour and noodles are expected to partially replace the wheat flour market. The volume of the rice noodle market is growing and can contribute to the rice surplus problems and farmer's income. This study was carried out to promote productivity of 'Saemimyeon' by finding the most suitable transplanting times in Youngnam Province. The transplanting times were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$, and June $14^{th}$ and the planting distance was $30{\times}12cm$. The field experiment was conducted in the Miryang region (southern plain region of Korea) from 2015 to 2017. Our results suggested that the optimum transplanting dates were from May $17^{th}$ to May $31^{th}$, which resulted in an average yield of 750 kg/10 a. The average grain filling rate before May $31^{th}$ was more than 83% and it declined to 75% after June $7^{th}$. The average temperature range from heading to harvesting time was $21{\sim}25^{\circ}C$ and the estimated optimal temperature was $24^{\circ}C$, which is similar to that of May $24^{th}$ by regression equation. It is suggested that low temperature at seed maturation time caused the lower grain filling rate, and therefore 'Saemimyeon' needed to be transplanted before May $31^{th}$ for higher productivity. Estimated optimal transplanting time based on temperature was 1 ~ 2 weeks earlier than the optimum transplanting time for common japonica rice cultivars in Youngnam Province.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.149-154
• /
• 1992

Buckwheat has been a popular favorite food crop in Korea for a long time. The objective of the study was to investigate the effects of climatic conditions and cultural methods on grain yields of summer buckwheat variety Sinnong 1 planted during the spring season in Suwon, Korea from 1989 to 1991. Frost minimum temperature of late April was -0.3$^{\circ}C$ in 1990 being very low as compared with 3.7$^{\circ}C$ of the normal year, and affected early growth of the seedlings emerging from the soil surface. In late May of 1990, the frost minimum temperature was 7.3$^{\circ}C$ being low as compared with 8.8$^{\circ}C$ of the normal year, and also induced cold injury to fertilization and grain filling. Total precipitation 374.5mm of mid and late June, 1990 provided serious damage to the grain filling and maturing buckwheat seeds and along with causing seed sprouting before harvest. However, the climates of 1989 and 1991 were very good for the growth and development of spring-sown buckwheats. When summer buckwheat cultivar Sinnong 1 was planted on April 20, 1989, its highest grain yields 268-292kg /10a were harvested from the plots of seeding rate 8kg /10a, drill seeding and polyethylene film mulching, and the mean grain yield of the plots was 238kg /10a in 1989, but 64.3kg in Suwon, and 40.2kg /10a in Muan in 1990. In 1991 maximum grain yield 277kg /10a was produced from the April 15 planted and vinyl-mulched plot, and 255kg /10a from the April 25 planted and non-mulched plot. Herbicide Alachlor-sprayed plots produced lower grain yields than no weed control and manual weeding plots. Mechanized drill-seeding saved 83～84% in planting hours as compared with manual broadcasting 21.6 hours /ha, and produced 9% more in grain yields from the two-season croppings of mechanized drill-seeding culture being 364kg /10a in total yields per year.

• Macromolecular Research
• /
• v.17 no.8
• /
• pp.568-574
• /
• 2009

We investigated the sintering and consolidation phenomena of silver nanoparticles under various thermal treatment conditions when they were patterned by a contact printing technique on polyimide substrate films. The sintering of metastable silver nanoparticles commenced at 180 $^{\circ}C$, where the point necks were formed at the contact points of the nanoparticles to reduce the overall surface area and the overall surface energy. As the temperature was increased up to 250 $^{\circ}C$, silver atoms diffused from the grain boundaries at the intersections and continued to deposit on the interior surface of the pores, thereby filling up the remaining space. When the consolidation temperature exceeded 270 $^{\circ}C$, the capillary force between the spherical silver particles and polyimide flat surface induced the permanent deformation of the polyimide films, leaving crater-shaped indentation marks. The bonding force between the patterned silver metal and polyimide substrate was greatly increased by the heat treatment temperature and the mechanical interlocking by the metal particle indentation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.309-309
• /
• 2022

This study investigated the antioxidant and yield properties of eight adzuki bean (Vigna angularis) cultivars under different mean temperature and sunshine hours in 2020 and 2021. The mean temperature in 2020 compared to 2021, which was normal, were lower during the pod extension and grain filling period. In addition, due to frequent rainfall during the vegetative perio d in 2020, there were fewer hours of sunshine compared to 2021. The Adzuki Bean yield in 2020 was about 13% lower than that in 2021 due to the decreased number of pods per plant and 100 seeds weight. The stability of yields was higher in 'Hongda' and 'Hongjin' than in 'Arari', which is the most cultivated in Korea. Also, the yields of these varieties were all higher than those of 'Arari' varieties for two years. Compared to 2021, in 2020, when weather conditions were not favorable, both antioxidant components and activity were higher. The cultivar 'Hongda' was a higher antioxidant component and activity than others for two years. The results suggested that the antioxidant component and activity were good in 2020 with about 13% decrease in yield compared to a normal year in 2021 due to mean temperature and sunshine hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.260-267
• /
• 1995

In temperate zone planting rice at different date subjects the Crop to different climatic condition. The present study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of IndicaxJaponica(I$\times$J) type rice cultivars caused by shift of heading date. Two J- and two I$\times$J-type cultivars were made to head on August 16, August 26, and September 5. Sink capacity was changed by shift of heading date in different mode between the types of cultivars. In both types major determinant of sink capacity was number of effective tillers, and the number of spikelets per panicle was the minor. In J-type earlier planting/heading was beneficial to increased panicle numbers and this was due mainly to a larger diurnal difference in temperature. I$\times$J-type cultivars favored a higher daily mean temperature to increase the sink capacity. The ability of source at heading, in terms of leaf area per panicle, chlorophyll content per spiklet, photosynthetic ability of leaves per unit area at 25$\^{\circ}C$, carbohydrate and N contents of leaves, was not so different among different heading dates in both types. However, the source activity was governed principally by temperature during grain filling. The J-type cultivars headed on Sept. 5 and I$\times$J-type cultivars headed later than August 16 could not have had sufficient source activity in grain filling due to lower temperature.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.223-234
• /
• 1987

This paper describes the mode of occurrence and mineralogical properties of electrum from the Namseong Gold-Silver deposits, for the purpose of obtaining data on the characteristics of the ore deposits and the behavior of gold and silver during the mineralization. The gangue minerals are quartz, calcite, fluorite. Ore minerals are mainly composed of pyrite, sphalerite, chalcopyrite and galena with minor amount of argentite, electrum, pyrargyrite, native silver and unidenfied mineral(Cu-Fe-Ag-S series). Three stage of mineralization recognized are, from early to later, (I) pyrite-electrum stage (II) sphalerite-chalcopyrite-galena-argentite-electrum stage (III) sulfosalts stage. The filling temperature of fluid inclusions in quartz ranges from $225^{\circ}$ to $335^{\circ}C$. The value of sulfur fugacity estimated by means of electrum-tarnish method ranges from $10^{-11.5}$ to $10^{-14}$ atm. The compositional heterogeneity within a single grain with respect to gold concentration is common in the Namseong electrums Chemical composition of electrum ranges generally between 25~45 atom% Au. Its gold content decreases in late stages of mineralization.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.304-310
• /
• 2017

This study was conducted over a 3-year period from 2013 to 2015 in the mid-northern inland, Cheolweon, Korea, to investigate changes in flowering date, daily mean temperature during grain filling, and yield characteristics affected by transplanting date in an early-maturing rice variety, 'Joun'. Thirty-day-old seedlings were transplanted at four different dates at 15-day interval from May 5 to June 19. Flowering dates were July 16, July 21, July 31, and August 14 when transplanting was performed on May 5, May 20, June 4, and June 19, respectively. Late transplanting resulted in higher daily mean temperature before flowering but late-transplanted rice required fewer days and lower cumulative temperature to reach flowering from transplanting. As transplanting was delayed, daily mean temperature for 40 days after flowering decreased, whereas daily sunshine hours for the same period increased, with a temperature of $24.8^{\circ}C$ and sunshine for 5.8 hours being recorded at the transplanting on May 5, and with a temperature of $21.0^{\circ}C$ and sunshine for 7.7 hours at the transplanting on June 19. With late transplanting, panicles per square meter significantly decreased, whereas spikelets per panicle showed an increasing trend. Regression analysis showed that maximum head rice yield was attained from the transplanting on May 18, for which the flowering date was July 21, and daily mean temperature for 40 days from that flowering date was $24.6^{\circ}C$. A decrease in head rice yield by 5% and 10% of the maximum was observed for rice transplanted on June 6 and June 15, which resulted in flowering dates of August 2 and August 11, respectively, and the daily mean temperatures for 40 days from flowering were 23.2 and $21.7^{\circ}C$, respectively. Therefore, in mid-northern inland, it is recommended to transplant 'Joun' on May 18 to induce flowering on July 21, when grain filling is subjected to a daily mean temperature of $24.6^{\circ}C$ during active filling stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.264-273
• /
• 2020

'Ilpum', a Korean short-grain mid-late maturing rice cultivar, was developed in 1990, more than 30 years ago. Despite its age, it has been the most widely grown cultivar in the Gyeongbuk province of South Korea for more than 25 years, making it the most important rice cultivar for the people of the Gyeongbuk province. The aim of this study was to analyze the relationship between the rice yield of "Ilpum', the main rice cultivar in the Gyeongbuk province, and climate elements in the Daegu (southern plain area) and the Andong (inland mountainous area) regions in Gyeongbuk, South Korea. The rice yield over the past five years increased by about 13% and 24%, compared to that produced in the late 1990s in Daegu and the early 2000s in the Andong region, respectively. The number of panicles per hill and the grain ripening rate significantly affected rice yield in the 'Ilpum' cultivars in the Daegu region. The faster heading was a factor in the increase in 'Ilpum' rice yield in the Andong region. The air temperature has been rising and sunshine duration has been increasing from the late 1990s to present in both regions. Rice yield was evaluated to understand the effect of climate factors. The rice yields increased owing to the long sunshine duration during the grain-filling stage in both regions. In Andong, increasing the maximum temperature during the vegetative stage increased rice yield. Rising air temperature during the reproductive stage also increased rice yield. In particular, long sunshine hours throughout the whole rice growing period increased the rice yield of this cultivar in the Andong region.

• Journal of Korea Foundry Society
• /
• v.37 no.5
• /
• pp.148-156
• /
• 2017

The effects of minor additives on the casting properties of AC4A aluminum alloys were investigated. Measurements of the cooling curve and microstructure observations were conducted to analyze the effects of Ti-B and Sr minor elements during the solidification process. A fine grain size and an increase in the crystallization temperature for the ${\alpha}-Al$ solution were evident after the addition of 0.1wt% Al-5%Ti-1%B additive. The modification effect of the eutectic $Mg_2Si$ phase with the addition of 0.05% Al-10%Sr additive was prominent. A fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident. Fluidity, shrinkage and solidification-cracking tests were conducted to evaluate the castability of the alloy. The combined addition of Al-5%Ti-1%B and Al-10%Sr additives showed the maximum filling length owing to the effect of the fine ${\alpha}-Al$ grains. The macro-shrinkage ratio increased, while the micro-shrinkage ratio decreased with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives. The macro-shrinkage ratio was nearly identical, while the micro-shrinkage ratio increased with the addition of the Al-10%Sr additive. The tendency of the occurrence of solidification cracking decreased owing to the effect of the fine ${\alpha}-Al$ grains and the modification of the $Mg_2Si$ phase with the combined addition of Al-5%Ti-1%B and Al-10%Sr additives.