• 한국작물학회지
• /
• 제32권1호
• /
• pp.103-111
• /
• 1987

Understanding grain filling characteristics represented by grain filling duration and grain filling rate is import-ant in improving higher yielding varieties and developing better cultural methods of rice (Oryza sativa L.). Recently developed 6 Japonica and 6 Japonica/Indica varieties were grown under 3 nitrogen levels at Experimental Farm of Chungbuk National University in 1986. The range of grain filling duration of 12 varieties was 20.9-39.0 days, while grain filling rate ranged from 53.8 to 136.6 mg. panicle$^{-1}$. day$^{-1}$. Although the difference of the average grain filling duration between Japonica varieties and Japonica/Indica was less than 4 days, the average grain filling rate of Japonica/lndica varieties was greater than Japonica more than 30%. Samgangbyeo showed the shortest grain filling duration of 21.0-24.2 days and the greatest grain filling rate of 119.3-143.8 mgㆍpanicle$^{-1}$. day$^{-1}$ under 3 nitrogen levels, while Seomjinbyeo and Milyang 23 showed the quite opposite grain filling characteristics. Nitrogen levels did not show any significant effects on grain filling characteristics. Negative correlation was round between grain filling duration and grain filling rate, and significant positive correlations of grain filling rate with grains/panicle, grain weight and panicle weight indicated that grain filling rate is more important characteristics of grain filling. Pathway analysis revealed that contribution of grain filling rate to panicle weight is rather indirect through grain weight.

• 한국작물학회지
• /
• 제52권1호
• /
• pp.112-121
• /
• 2007

Grain filling is a crucial factor that determines grain yield in crops since it is the final process directly associated with crops' yield performance. Grain filling process can be characterized by the interaction of rate and duration of grain filling. This study was conducted, using 16 temperate japonica rice genotypes, with aims to (1) seek variations in grain filling duration and rate on area basis, (2) compare the contribution of grain filling duration and rate to grain yield, and (3) examine the influence of temperature and solar radiation for effective grain filling on grain yield in relation to grain filling duration and rate. Grain filling rate and duration exhibited highly significant variations in the ranges of $20.7{\sim}46.3\;g\;m^{-2}d^{-1}\;and\;11.2{\sim}35.5$ days, respectively, depending on rice genotypes. Grain yield on unit area basis was associated positively with grain filling duration but negatively with grain filling rate. Grain filling rate and duration were negatively correlated with each other. Final grain weight increased linearly with the rise in both cumulative mean temperature and cumulative solar radiation for effective grain filling. Higher cumulative mean temperature and cumulative solar radiation for effective grain filling were the results of longer grain filling duration, but not necessarily higher daily mean temperature and daily solar radiation for effective grain filling. Grain filling rate demonstrated an increasing tendency with the rise in daily mean temperature for effective grain filling but their relationship was not obviously clear. It was concluded that grain filling duration, which influenced cumulative mean temperature and cumulative solar radiation for effective grain filling, was the main factor that determined grain yield on unit area basis in temperate Japonica rice.

• 한국작물학회지
• /
• 제36권2호
• /
• pp.166-173
• /
• 1991

출수후 등숙기간 동안에 엽신의 노화속도와 동화산물의 전류특성과의 관계를 구명하며 등숙향상 및 단기등숙 품종육성을 위한 선발지표를 제공코자 엽신의 노화정도가 다른 올보리외 29품종 및 계통을 공시하여 엽신 노화율, 등숙율 및 상호 상관관계를 조사하였던 바 결과를 요약하면 다음과 같다. 1. 엽신의 노화속도 및 입충전속도(등숙율)는 계통에 따라 큰 차이가 있었다 2. 등숙초ㆍ중기(출수후 10-20일) 및 등숙중ㆍ후기(출수후 20-30일)의 엽신 노화율과 해당 각 시기의 등숙율과는 높은 정의 상관관계가 있었다. 3. 등숙초ㆍ중기의 엽신 노화율과 등숙전기간(출수후 10-35일)의 등숙율과는 부의 상관이 등숙중ㆍ후기의 엽신 노화율과는 고도의 정의 상관관계가 있었다. 4. 입중과 등숙중ㆍ후기 및 등숙전기간의 등숙율과는 고도의 정의 상관관계가 있었으나 등숙초ㆍ중기의 등숙율 및 등숙일수와는 상관이 없었다. 5. 노화지수의 감소 양상은 계통에 따라 4가지 유형으로 분류할 수 있었는데 종실수량 및 등숙율면에서 가장 이상적인 유형은 IV형이었다 6. 본 시험결과 단기등숙형 대맥 품종으로 가장 이상적인 형은 등숙초ㆍ중기에는 노화지수가 높으면서도 노화속도가 느리나 등숙중ㆍ후기에는 노화속도가 빠른 품종임이 구명되었다.

• 한국작물학회지
• /
• 제48권5호
• /
• pp.397-401
• /
• 2003

This experiment was conducted to know the characteristics of kernel growth as affected by various temperature regimes during grain filling using the varieties Hwaseongbyeo, Ilpumbyeo and Chucheongbyeo. The rice plants tested were grown in the natural condition at 1/5000a Wagner pots until flowering. After flowering, the rice plants were moved to controlled temperature conditions in a phytotron. The minimum/maximum daily temperature in the phytotron was controlled by 12/18, 15/21, 18/24, 21/27, and 24/$30^{\circ}C$, respectively. The grain weights were measured every three days after treatment. The mean daily kernel growth rate during active grain filling period showed different responses among varieties under various temperature regimes. The kernel growth rate of Chucheongbyeo was seriously reduced as temperature regimes were decreased. However, that of Ilpumbyeo was not influenced so critically. Ilpumbyeo showed some advantages in grain filling under low temperature regimes compared to Chucheongbyeo. The lag phase in grain filling of Chucheongbyeo was the longest among tested varieties, followed by Hwaseongbyeo under daily mean temperature regime of $15^{\circ}C$. Kernel weight of Ilpumbyeo increased fast in early grain filling phase under low temperature. This characteristic may be favorable for grain filling in temperate zone where the daily mean temperature is drastically dropped during grain filling period. Regression analysis with kernel growth rate and temperature showed the estimated critical low temperature for grain filling among varieties were $9^{\circ}C$, $12^{\circ}C$, $13^{\circ}C$ in Ilpumbyeo, Hwaseongbyeo and Chucheongbyeo, respectively. Under moderate temperature the duration of grain filling of Ilpumbyeo was longer than that of Chucheongbyeo. However, Under low temperature that of Ilpumbyeo was more favorable than Chucheongbyeo.

• 한국작물학회지
• /
• 제33권1호
• /
• pp.5-11
• /
• 1988

Varietal differences of grain filling duration and rate are generally recognized in rice (Oryza sativa L.). But the differences of grain filling characteristics between the parts within a panicle might be present since it takes 6-8 days to finish anthesis in a panicle. To elucidate this, 6 Japonica and 6 Japonica/Indica varieties were grown under three nitrogen levels at the Experimental Farm of Chungbuk National University in 1986, and grain filling characteristics of top, middle and bottom parts of a panicle were analyzed. Rice grain filling duration could be divided into 3 phases, i.e., Lag phase(LP) of 5 days after heading. Linear increasing period (LIP) of 5-20 days after heading and Late filling period (LFP) thereafter. Grain weight difference between the panicle parts was greater during LIP in all the varieties and was decreased during LFP. The difference was greater in Japonica/Indica varieties. Samgangbyeo and Seomjinbyeo had the shortest and the longest grain filling durations with 22.6 and 37.1 days, respectively. In average, grain filling duration of the bottom part of a panicle was 1-2 days shorter than that of top or middle part. The differences were negligible in Daecheongbyeo, Taebaegbyeo and Milyang 23, while it was greater in Tongil with 4.9 days. Grain filling rates were ranged from 0.612 to 1.097 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍMilyang 23 showed the lowest rate with 0.612-0.682 mgㆍgrain$^{-1}$ㆍday$^{-1}$, while the rates of Baegyangbyeo, Yongmoonbyeo, Samgangbyeo, Nongbaeg and Daeseongbyeo were about 1 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍGrain filling rate of bottom part of a panicle was lower than that of top or middle part. The difference was samll in Nongbaeg and Daeseongbyeo, while it was the greatest in Tongil with 0.222 mgㆍgrain$^{-1}$ㆍday$^{-1}$. Grain filling duration and rate were not afftected by nitrogen level, but varietal and spatial differences of grain filling characteristics were highly significant. However, the spatial difference of grain filling rates within a variety was not significant. Grain filling characteristics of each part of a panicle were significantly correlated (r=0.7207-0.9879) with those of a whole panicle.

• 한국작물학회지
• /
• 제48권1호
• /
• pp.44-49
• /
• 2003

In vitro culture of panicle has been the method to accumulate starch and protein in immature grains by providing nutrients after florets crossed between remote genotypes artificially. Grain filling means embryo development and sucrose translocation from photosynthetic source, and starch manufacture in endosperm. The concentrations of sucrose used to culture immature rice panicle were 5, 10, 15, 20% and glutamine was 20 mM. When immature rice panicles at 5 days after flowering were cultured in distilled water with different concentrations of sucrose, glutamine 20 mM and MS medium with different concentrations of sucrose, glutamine 20 mM for 30 days the later was effective on grain filling. The optimal concentration of sucrose on grain filling in vitro culture of rice panicle was 10% and the weight of grain cultured was 10.14 mg that was corresponded to 57% of intact plant. In the method of treating plant growth regulators, the culture of immature rice panicle adding in MS medium with Kinetin, IAA, $\textrm{GA}_3$ were effective on grain filling than the culturing of immature rice panicle after submerging in solutions of Kinetin, IAA, $\textrm{GA}_3$ for 1day. When immature rice panicle was cultured in MS medium with sucrose 10% and Kinetin 46.47 $\mu$M it was effective on grain filling, respectively. The weight of grain cultured was 13.1mg that was corresponded to 75% of intact and germination rate was 51 %. When immature rice panicles were cultured in medium with different concentrations combined with Kinetin 4.65, 46.47, 464.7 $\mu\textrm{M}$, IAA 5.71, 57.08, 570.80 $\mu\textrm{M}$ for 30 days and in medium with IAA 5.71, 57.08, 570.80 $\mu\textrm{M}$ for 15 days after culturing in medium with Kinetin 4.65, 46.47, 464.70 $\mu\textrm{M}$ for 15 days the effect on grain filling was similar.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.59-59
• /
• 2017

Rice (Oryza sativa L.) is the most important crop and its yield must be improved to feed the increasing global population. Recently developed high-yielding varieties with extra-large sink capacity often have a problem in unstable grain-filling. Therefore, understanding limiting factors for improving grain-filling and controlling them are essential for further improvement of rice grain yield. However, since grain-filling rate was determined by complex sink-source balance, the ability of grain-filling was very difficult to evaluate. Source ability for 'grain' was not only determined by the ability of carbon assimilation in leaves, but also that of carbon translocation from leaves to panicles. Sink strength was determined by the complex carbon metabolism from sucrose degradation to starch synthesis. Hence, to evaluate the grain-filling ability and determine its regulatory steps, the whole picture of carbon flow from photosynthesis at leaves to starch synthesis at grains must be revealed in a metabolite level. In this study, the yield and grain growth rate of three high-yielding varieties, which show high sink capacity commonly, were compared. Momiroman showed lower grain filling rate and slower grain growth rate than the other varieties, Hokuriku 193 and Tequing. To clarify the limiting point in the carbon flow of Momiroman, $CO_2$ labeled by stable isotope ($^{13}C$) was fed to three varieties during ripening period. The ratio of $^{13}C$ left in the stem was higher in Momiroman 24 hours after feeding, suggesting inefficient carbon translocation of Momiroman. More interestingly, $^{13}C$ translocation from soluble fraction to insoluble one in the grain seemed to be slower in Momiroman. To get the further insight in a metabolite level, we are now trying the $^{13}C$ labeling metabolome analysis in the developing grains.

• 한국작물학회지
• /
• 제63권2호
• /
• pp.120-130
• /
• 2018

Improvement in rice grain yield has been approached by means of genetic amendment, cultural management, and environmental adaptation. Subjecting the plant during the grain filling period to an appropriate environment plays a key role in achieving a high grain yield in temperate rice. Field experiments were conducted for two consecutive years with two planting times to assess the relations among grain filling traits, loss of leaf activity during the ripening period, and the grain yield of temperate japonica rice with wide environmental variation. Higher grain yields were attained in 2017 than in 2016 and with late planting than with early planting. The high grain yield accompanied a comparatively lesser increase in grain weight at the early filling stage but more gain in grain weight occurred during the late filling stage. Final grain weight correlated positively with grain filling duration but negatively with grain filling rate. Extended grain filling duration was associated with higher cumulative temperature and cumulative solar radiation for an effective grain filling period. The reduction in SPAD value ${\times}$ leaf dry weight from heading to harvest significantly correlated with final grain dry weight in a positive manner. No significant relation was found between grain filling duration and the decrease in SPAD value ${\times}$ leaf dry weight during the grain filling period. The results suggest that grain filling duration and loss of leaf activity during ripening independently contribute to environmentally induced yield improvement in temperate japonica rice.

• 한국작물학회지
• /
• 제33권3호
• /
• pp.262-269
• /
• 1988

벼의 등숙기간중에 발생하는 수발아 피해를 경감시킬 수 있는 방법을 모색하기 위하여 품종간 수발아성 비교, 출수후 종자발달에 따른 발아율 비교, 등숙기의 생장조절제 처리가 수발아에 미치는 영향 등을 조사 및 실험한 결과를 요약하면 다음과 같다. 1. 보통기 보비 재배한 포장에서의 수발아성은 일반형중 조생종들이 높았고 중만생종과 통일형 품종들은 수발아가 되지 않았다. 2. 일반형 품종인 대성벼는 출수후 30일, 통일형인 태백벼는 35일이 경과되면 발아력이 높아져 종자로서의 발아조건은 충분히 갖추어진 것으로 보여진다. 3. 공시한 두 품종 및 3처리시기에서 모두 수발아 억제에는 NAA 및 CMH는 100ppm 그리고 Reglone은 0.4∼0.6%의 농도에서 효과가 가장컸다. 4. 생장조절제가 처리된 종자의 발아율은 공시된 두 품종 모두 NAA와 CMH는 무처리와 차이없이 양호 하였으나 Reglone 이 처리된 종자의 발아율은 낮았다. 5. 생장조절제가 처리된 두 품종의 등숙율은 NAA와 CMH는 무처리와 차이가 없었으나 Reglone처리 구는 낮았고 종자 색갈은 NAA만이 무처리와 비슷하였으며 CMH와 Reglone 은 농도가 높아짐에 따라 다갈색을 띄는 미립이 많았다. 도정특성을 보면 NAA는 무처리와 차이가 없었고 CMH 및 Reglone을 출수후 20∼30일에 처리한 구는 완전현미비율이 낮았다.

• 한국작물학회지
• /
• 제36권1호
• /
• pp.34-40
• /
• 1991

본 시험은 대맥 등숙기간중 급속한 온도상승과 고온건조 및 과습 등 불량환경으로 맥체가 급격히 노화되어 충분히 등숙되지 않은 상태에서 성숙이 이루어지기 때문에 우리나라의 대맥은 품질이 불량할 뿐만 아니라 수량성도 외국에 비해 떨어지고 있는 실정이다. 따라서 등숙기의 엽신노화와 동화산물의 전류특성과의 관계를 구명하여 등숙향상을 위한 품종 육성 선발의 기초 자료로 이용코자 실시하였던바, 결과를 요약하면 다음과 같다. 1. 등숙일수 경과에 따른 엽신의 생엽수 및 노화속도는 품종에 따라 큰 차이가 있었다. 2. 입출전 및 동화물질의 전류속도는 엽신의 노화가 빠른 품종군이 늦은 품종군에 비해 빠른 것으로 나타났다. 3. 엽위 및 기관별로 $^{14}$ C 물질의 전류 양상을 본 결과, 등숙초기에는 노화가 빠른 품종군은 산위엽(지엽, 2엽)과 하위엽 ( 3, 4, 5엽)에 흡수된 $^{14}$ C의 량이 이삭으로 전류되는 비율이 비슷하였으나 등숙이 진전되면서 상위엽에 흡수된 $^{14}$ C은 전류가 급격히 이루어지나 하위엽은 반대의 경향이고, 노화가 늦은 품종군은 등숙초기에는 하위엽의 전류속도가 월등히 높고 하위엽은 낮으나 등숙이 진전되면서 반대의 양상으로 나타났다. 4. 경엽에 흡수된 $^{14}$ C이 종실로 정류되는 양상과 입충전속도가 엽신의 노화속도 조만 품종군별로 일치하는 경향이었다. 5. 광합성 속도는 등숙중기까지는 엽신노화가 빠른 품종이 높았으나 중기후는 낮았다. 6. 종실수량은 엽신의 노화속도가 빠른 품종군이 다소 높은 경향이었다.