• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.9-11
• /
• 2013

We have investigated the effect of thickness of the MgB2 film on the grain growth direction as well as on their superconducting properties. $MgB_2$ films of various thicknesses were fabricated on c-cut $Al_2O_3$ substrates at a temperature of $540^{\circ}C$ by using hybrid physical-chemical vapor deposition (HPCVD) technique. The superconducting transition temperature ($T_c$) was found to increase with increase in the thickness of the $MgB_2$ film. X-ray diffraction analysis revealed that the orientation of grains changed from c-axis to a-axis upon increasing the thickness of the $MgB_2$ film from 0.6 to 2.0 ${\mu}m$. $MgB_2$ grains of various orientations were observed in the microstructures of the films examined by scanning electron microscopy. It is observed that at high magnetic fields the 2.0-${\mu}m$-thick film exhibit considerably larger critical current density ($J_c$) as compared to 0.6-${\mu}m$-thick film. The results are discussed in terms of an intrinsic-pinning in $MgB_2$ similarly as intrinsic-pinning occurring in high-Tc cuprate superconductors with layered structure.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.56.1-56.1
• /
• 2012

The microstructures and mechanical properties of Co-29Cr-6Mo alloy with C and N additions, produced by additive manufacturing using electron beam melting (EBM) method, were studied using X-ray diffraction, electron back scatter diffraction, transmission electron microscope, Vickers hardness tests, and tensile tests, focusing on the influences on the build direction and the various heat treatments after build. It is found that the microstructures for the as built specimens were changed from columnar to equiaxed grain structure with average grain size of approximately $10-20{\mu}m$ due to the heat treatment employing the reverse transformation from a lamellar (hcp + $Cr_2N$) phase to an fcc. Our results will contribute to the development of biomedical Ni-free Co-Cr-Mo-N-C alloys, produced by EBM method, with refined grain size and good mechanical properties, without requiring any hot workings.

• Restorative Dentistry and Endodontics
• /
• 제4권1호
• /
• pp.7-9
• /
• 1978

Brass specimen, copper based alloy was prepared in cubic form about $1cm{\times}1cm{\times}1cm$ in volume. The specimens were mechanically compressed in one direction until the dimension distorted to 20%, 40%, 60% and 80% in length. The compressed specimens with 80% distorted in length were then heat treated in $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$ for 30 minutes. Microscopic examination was made on both compressed and heat treated specimens. The results obtained from the study were as follows: 1. Grain boundary and twin phenomenon was clearly seen in 0% and 20% compressed cases. Slip bands was appeared in 40% cases and distributed equally as well as twin. 2. The first evidence of slip bands was observed in 20% and the bands grew thicker and denser as the compression increased. 3. The density of the bands were reduced after annealing in $200^{\circ}C$ and completely disappeared at $300^{\circ}C$ cases. 4. Recrystallization was noticed unevenly in $300^{\circ}C$ cases and the evidence of twin was observed in these crystallized area. 5. In $400^{\circ}C$ cases the grain boundary was evenly found and the twin phenomenon was clearly observed. Grain boundary and twin was noticeably formed in size according to the annealing temperature increased.

• 한국작물학회지
• /
• 제23권2호
• /
• pp.1-24
• /
• 1978

과맥의 조숙단간다수성 품종육성에 관한 기초자요를 얻고저 고맥에서 주로 교배모본으로 많이 사용되어온 애원과 001, 사국과 4002, 산수과, 영성과, 향천과 001, 장주백과, 백동, 청맥, 세도하다가, 목포 4002등 10품종을 1974연에 diallel cross하여 1975연부터 1976연까지 작물시험장 목포지장 시험포장에서 양친, F_1과 F_2를 재배하여 출수기, 간장 및 주당수량을 조사하여 그들의 유전율, 조합능역과 유전에 대하여 분석검토한 결과를 요약하면 다음과 같다. 1. 광의의 유전율은 출수기, 간장 및 수량이 각각 0.7831, 0.7599, 0.6061로서 비교적 높았고 협의의 유전율은 출수기가 F_1에서는 0.3972, F_2에서는 0.7789였으며 간장은 F_1에서 0.6567, F_2에서 0.6414로 매우 높아서 초기세대에서 선발이 유효할 것이나 주당수량은 F_1이 0.3776, F_2에서 0.4170으로 비교적 낮았다. 2. 출수기에 대한 GCA는 F_1 및 F_2에서 애원과 001, 사국과 4002, 산수과, 영성과는 조생방향으로 기타품종은 만생방향으로 높았으며 F_1의 GCA는 F_2 보다 높았다. SCA는 사국과 4002$\times$목포 애원과 001\times산수과, 사국과 4002\times산수과, 사국과 4002\times영성과 조합은 F_1과 F_2에서 모두 조생 방향으로 높았다. 간장의 GCA는 F_1 및 F_2에서 모두 목포 4002, 영성과, 산수과, 사국과 4002는 단간방향으로 높았으며 기타품종은 장간방향으로 높았고 F_1의 GCA는 F_2보다 높았다. SCA는 가장 단간인 목포 4002와 애완과 001, 산수과 및 영성과와의 조합에서 단간방향으로 높았다. 4. GCA는 F_1 주당수량이 높은 백동, 향천과 001 산수과, 영성과, 사국과 4002등이 다수방향으로 높았고 기타품종은 저수방향으로 높았으며 F_1의 GCA는 F_2보다 다소켰다. SCA가 가장 큰 조합은 목포 4002를 편친으로 한 사국과 4002, 세도하다가, 청맥과의 조합이었다. 5. F_1 및 F_2의 평균출수기는 mid-parent보다 조생이였으며 F_1이 F_2보다 조생이었고 이러한 경향은 조생품종일수록 높고 만생품종일수록 낮았다. 6. 출수기의 유전은 조생방향으로 부분우성이며 대립유전자의 작용이 크고 품종간의 우열관계는 애원과 001, 사국과 42경, 향천과 001, 목포 4002가 다른 품종에 대하여 열성으로 나타났다. 7. F_2에서 출수기유전은 45조함중 33조함은 소수 유전자 개념으로는 설명할 수 없고 1개조함은 조생 대 만생이 3 : 1, 1개 조합은 만생 대 조생이 3 : 1 로 분리하며 4개 조합은 조생 대 만생이 9 : 7, 6개 조합은 만생 대 조생이 9 : 7로 분리하는 것으로 나타났다. 8. F_2에서 출수기에 대하여 조생개체의 초월분리가 많은 조합은 영성과\times백동, 애원과 001\times세도하다가. 산수과\times향천과 001, 애원과 001\times향천과 001, 사국과 4002, \times향천과 001, 향천과 001\times세도하다가, 애원과 001\times사국과 4003, 애원관 001\times영성과 등이였다. 9. F_1 및 F_2의 평균간장은 양친의 간장 범위내에서 mid-parent보다 F_1 및 F_2가 다소 큰 영향을 보였으며 이러한 경향은 단간품종에서 크고 장간품종에서 적었다. 10. 간장유전은 부분우성이며 대립유전자의 지배를 받고 상가적 유전자의 작용이 큰 것으로 나타났으며 극단간인 목포 4002는 열성, 장간인 백동은 우성인 것으로 나타났다. 11. 간長에 대한 $F_2에서의$ 분리양상을 보면 대부분의 조함에서 정규분포를 보여 유전자의 상가적작용이 클 것으로 보이며 단간 또는 장간으로 초월분리를 보인 조합이 많았다. 애원과 001, 사국과 4002, 영성과, 세도하다가 등의 중간\times중간조합에서 단간개체의 분리가 많았다. 12. F_1 및 F_2의 평균주당수양은 mid-paren에 비하여 F_1에서 6% F_2에서 5% 높았으며 주당수량이 많은 품종에서는 증수율이 낮고 주당수량이 적은 품종에서는 증수율이 높았다. 13. 주당수량에 대하여는 Wr, Vr graph에서 비대입유전자작용이 컷고 초월우성을 보였으며 품종간의 우열관계는 목포 4002의 저수성이 열성을 나타났으나 유전현상의 정확한 추정은 국난하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.315-318
• /
• 2004

We developed a vapor induced crystallization (VIC) process for the first time to obtain high quality polycrystalline Si films by sublimating the mixture of $AlCl_3$ and $NiCl_2$. The VIC process enhanced the crystallization of amorphous silicon thin films. The LPCVD amorphous silicon thin films were completely crystallized after 5 hours at 480 $^{\circ}C$. It is known that needle-like grains with very small width grow in the Ni-metal induced lateral crystallization. In our new method, the width of grains is larger because the grain can also grow perpendicular to the needle growth direction. Also the interface between the merging grain boundaries was coherent. As the results, a polycrystalline film with superior microstructure has been obtained.

• 분석과학
• /
• 제11권4호
• /
• pp.316-320
• /
• 1998

An image analysis was used for the interpretation of microstructures of ferrous metal artifacts. For the purposes, various microstructural features such as average grain size, phase area, shape factor, and composition of the inclusions, were parameterized for the information about manufacturing techniques such as casting, heating and tempering. The carbon content was determined through the evaluation of the amount of pearlite phase. As the amount of pearlite phase increased the shape factor also increased. Grain size was relatively smaller in trans-section than in cross-section. The manufacturing direction was trans-sectional because the orientation of inclusions was elongated lengthwise. All inclusions was of silicate groups and the manufacturing temperature was estimated up to $1450^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.857-860
• /
• 2000

The objective of this paper is to demonstrate degradation phenomena through DC degradation tests and predicts degradation phenomena as a function of time from the tests. The ZnO varistor used in this investigation were fabricated by standard ceramic techniques. Especial, these were sintered in nitrogen atmosphere, at 2 h, for $1300^{\circ}C$. The conditions of DC degradation test were 115$\pm$$2^{\circ}C$for 0, 2, 4, and 8 h, respectively. To demonstrate the degradation phenomena of ZnO varistors, Voltagecurrent analyses were performed before and after the degradation test, and frequency analyses were used with the time of the degradation tests. It was found that the degradation occurred in not grain but grain boundary and the degradation behavior of varistors was unsymmetrically degraded with the direction of tests.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.119-124
• /
• 1999

Silicon nitride ceramics with highly oriented microstructure were prepared by tape casting a slurry containing 5 wt% of the silicon nitride whiskers. The whiskers were aligned in the casting direction and worked as seeds for the grain growth. The anisotropy was observed from the sintering shrinkage, Vickers indentation crack lengths, and XRD patterns. The cracks were much longer on the surface normal to the aligned grains than on the tape casting surface where the lateral cracks were also observed. The effect of sintering additives and the annealing treatment on the indentation crack length was examined. The sample with higher silica content had longer cracks than the one with lower silica content. The crack length anisotropy increased after annealing at 2123K.

• 암석학회지
• /
• 제3권1호
• /
• pp.20-33
• /
• 1994

Some of the seven types of subgrain boundaries (Means and Ree, 1988) in octachloropropane samples show distinctive deformation patterns during their development. Type II subgrain boundaries migrate to accommodate the deformation difference between adjacent grains. The formation of Type III requires a rigid-body roation of grains to reduce misorientation of adjacent grains. Type I, IV, V and VI develop either in static or dynamic condition. Type VII form only in static environments after deformation. Ribbon grains can develop via Type III or Type IV process. The orientation pattern and density of subgrain boundaries are more or less stable through a post-deformation heating. Subgrain boundary orientations are symmetric with respect to the grain-shape foliation in pure shear. In simple shear, their maximum inclines toward the direction of shear.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.104-108
• /
• 2002

Nail withdrawal tests were conducted on clear wood of domestic small diameter logs. Nails were driven into the cross and longitudinal sections of each specimen, then nail withdrawal tests were performed. Nail withdrawal loads are strongly dependent on the direction of nail positions. The average load values for the nail withdrawal both in cross section and longitudinal section are higher in high specific gravity (SG) wood of sawtooth oak (Quercus acutissima Carr.) than those in low SG wood of Korean red pine (Pinus densiflora Sieb. et Zucc.) and pitch pine (Pinus rigida Mill.). The average ratio of the nail withdrawal loads for side-grain and end-grain are higher in the low SG wood than that in the high SG of wood. Both linear and non-linear regression analyses were conducted on nail withdrawal load with SG, good correlations were obtained between nail withdrawal load and SG.