• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.531-537
• /
• 2009

Purpose: Alveolar bone grafting has become an essential process in the treatmemt of alveolar cleft patient for stabilization of the maxillary arch, elimination of oronasal fistula, the reconstruction of the soft tissue nasal base support, and creation of bony support for tooth eruption for implant. The use of Autologous iliac cancellous bone is preferable because of the adequate quantity and high osteoinductive potential. However, even with iliac bone, insufficient osteoregeneration and absorption occur due to several factors such as the patient's age, cleft width, functional stress, and others. In order to increase osteoregeneration where the iliac bone is placed, the present study is associated with bone marrow aspirate (BMA). The experimental study evaluated the efficacy of osteoregeneration in normal cleft rabbits when alveolar bone grafting was performed with autologous iliac corticocancellous bone. Methods: Twenty - four New Zealand White rabbits were divided randomly into 2 groups (BMA, control). All animals underwent harvesting of corticocancellous bone graft from the right posterior iliac crest via standard surgical technique. $1m{\ell}$ of BMA were obtained by scraping the needle and aspirate with $10m{\ell}$ syringe from the contralateral iliac bone wall. The muco - periosteal flap on the palate was elevated. A mixture of Equal bone's volumes with BMA and saline as its control was inserted into the cleft. Animals were sacrificed at 2, 4, and 8 weeks and maxilla was harvested for dental peri - apical X-ray, bone matrix density (BMD),and histologic analysis. Result: BMD of regenerated bone to the cleft in the rabbits was higher than that of the control rabbits. X-ray, histologic analysis showed that increased osteoregeneration and low absorption rate were observed in the BMA group. Conclusion: Our experimental study showed BMA enhanced the osteoregeneration and survival rate of alveolar bone grafting. BMA is easy to extract & cost - time effective. So it can be an effective enhancers for bone grafting mixtures.

• Journal of Chest Surgery
• /
• v.39 no.3 s.260
• /
• pp.184-193
• /
• 2006

Background: Off-pump coronary artery bypass grafting (OPCAB) has been proven to result in less morbidity. The patients who have left ventricular dysfunction may have benefits by avoiding the adverse effects of the cardiopulmonary bypass. The present study compared early and midterm outcomes of off-pump versus on-pump coronary artery bypass grafting (On pump CABG) in patients with severe left ventricular dysfunction. Material and Method: Ninety hundred forth six patients underwent isolated coronary artery bypass grafting by one surgeon between January 2001 and Febrary 2005.. Data were collected in 100 patients who had left ventricular ejection fraction (L VEF) less than $35\%$ (68 OPCAB; 32 On pump CABG). Mean age of patients were 62.9$\pm$9.0 years in OPCAS group and 63.8$\pm$8.0 years in On pump CABG group. We compared the preoperative risk factors and evaluated early and midterm outcomes. Result: In OPCAB and On pump CABG group, mean number of used grafts per patient were 2.75$\pm$0.72, 2.78$\pm$0.55 and mean number of distal anastomoses were 3.00$\pm$0.79, 3.16$\pm$0.72 respectively. There was one perioperative death in OPCAB group ($1.5\%$). The operation time, ventilation time, ICU stay time, CK-MB on the first postoperative day, and occurrence rate of complications were significantly low in OPCAB group. Mean follow-up time was 26.6$\pm$12.8 months (4${\~}$54 months). Mean LVEF of OPCAB and On pump CABG group improved significantly from $27.1\pm4.5\%$ to $40.7\pm13.0\%$ and $26.9\pm5.4\%$ to $33.3\pm13.7\%$. The 4-year actuarial survival rate of OPCAB and On pump CABG group were $92.2\%,\;88.3\%$ and the 4-year freedom rates from cardiac death were $97.7\%,\;96.4\%$ respectively. There were no significant differences between two groups in 4 year freedom rate from cardiac event and angina. Conclusion: OPCAS improves myocardial function and favors early and mid-term outcomes in patients with severe left ventricular dysfunction compared to On pump CABG group. Therefore, OPCAB is a preferable operative strategy even in patients with severe left ventricular dysfunction.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.811-812
• /
• 2006

This study is study about implementation of the production work management system that used RFID. A RFID Card system is used, and a collection totalizes and all data by real time, and, in production planning and work indication, work process time analyzes production present situation information by line by process automatically, and it is solution to be able to do an inquiry. The production related time that was hard to be measured are produced in the existing production management system exactly, and a grafting with solution of ERP, SCM, CMMS, etc is the study that is going to establish the possible most suitable system.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.307-315
• /
• 2002

Major factors affecting the impact resistance of high impact polystyrene (HIPS), the rubber-toughened grade of polystyrene, are rubber-phase particle size and size distribution, molecular weight, morphology, and degree of grafting. Accordingly, it is important to control or investigate these factors. In this study, the effect of solvent content was analyzed by the morphology and particle size distribution of rubber phase, and final properties in bulk-solution polymerization of HIPS. The prepolymerization time was, first, determined by measuring the evolution of particle size distribution of dispersed phase to explain the phase inversion with time. As the solvent content increased, the size of rubber particle increased and then gradually decreased. Rubber-phase morphology was likely to have higher degree of grafting as the solvent content increased. Rheological and mechanical properties decreased as the solvent content increased because of the decrease of matrix molecular weight due to the chain transfer reaction to solvent and the existence of residual solvent. Nevertheless, the impact resistance seemed to increase when the rubber particle size increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.89-97
• /
• 1989

Graft polymerization of MMA onto cotton fiber was carried out in two ways, two step graft polymerization and one step emulsion graft polymerization, using tetravalent cerium ion as an initiator. At two step graft polymerization, the first step was the pretreatment of cotton fiber with an aqueous initiator solution and the second was the grafting pretreated cotton fiber in the monomer solution. In case of one step emulsion graft polymerization, MMA was emulsified with SLS in initiator solution. Under the various graft polymerization conditions, graft yield, graft efficiency and from the Arrhenius plot the apparent activation energy were compared. The results of this study were as follows: 1. Graft yield and graft efficiency of emulsion graft polymerization were higher than those of two step graft polymerization. 2. In case of two step graft polymerization, graft yield was affected by the pretreatment time of cotton fiber with an aqueous initiator solution. And graft yield of emulsion graft polymerization was increased with the concentration of emulsifier below cmc of SLS and was decreased thereafter. 3. Elevation of temperature resulted increase in graft yield for both grafting methods. The apparent activation energy of emulsion graft pelymerzation was lower than that of two step graft polymerization. 4. Increased reaction time increased in graft yield, but decreased in graft efficiency. 5. Moisture regain of grafted cotton was decreased with graft yield.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1346-1351
• /
• 2009

Recent evidence has shown that many pluripotetic neural crest cells are fate-restricted and that different fate-restricted crest cells emigrate from the neural tube at different times. Jin et al. (2001) identified the expression patterns of Wnts and its antagonists at the time that neural crest cells were being specified and suggested that Wnt signaling was involved in the segregation/differentiation of neural crest cells in the trunk in vitro. In this study, we evaluated the effects of Wnt signaling in avian neural crest lineage segregation. To accomplish this, Wnt signaling was disturbed at the time of neural crest segregation and differentiation by grafting Wnt-3a expressing cells and conducting dominant negative glycogen synthase kinase (dnGSK) electroporation. Stimulation of Wnt signaling induced neural crest lineage segregation and melanoblast specification, and increased the expression levels of genes known to be involved in neural crest development such as cadherin 7 and Slug, which suggests that they are involved in Wnt-induced neural crest lineage differentiation into melanoblasts.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2020

In order to develop a new adsorbent for removal of formaldehyde from aqueous solution, surface modification of TiO₂ nanoparticles was performed with 2,4-Dinitrophenylhydrazine (DNPH) that have a strong affinity to the formaldehyde. Sodium dodecyl sulfate (SDS) surfactant was used to improve the DNPH grafting to TiO₂ surface. Modified adsorbents were characterized by SEM, TEM, XRD, EDX and FTIR. Since the COD level in wastewaters including formaldehyde is considerable, it is necessary to determine the COD content of the synthetic wastewater. In order to determine the optimal removal conditions, the effect of contact time (60-210 min), pH (4-10) and adsorbent dosage (0.5-1.5 g/L) on adsorption and COD removal efficiencies were studied, using response surface method. EDX and FTIR analysis confirmed the presence of nitrogen-containing functional groups on the modified TiO₂ surface. The maximum formaldehyde adsorption and COD removal efficiencies by modified TiO₂ were about 15.65 and 7.35% higher than the unmodified nanoparticles respectively. Therefore, the grafting of nano-TiO₂ with DNPH would greatly improve its formaldehyde adsorption efficiency. The optimum conditions determined for a maximum formaldehyde removal of 99.904% and a COD reduction of 94.815% by TiO₂/SDS/DNPH nanocomposites were: adsorbent dosage 1.100 g/L, pH 7.424 and the contact time 183.290 min.

• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.66-72
• /
• 2023

Background: During the coronavirus disease 2019 (COVID-19) pandemic, the everyday use of face masks massively increased to prevent the spread of infection. Many people complain of ear pain and erosion when wearing a mask for extended periods of time. If prolonged mask usage is uncomfortable for ordinary people, a question arises-how much more inconvenient must mask wearing be for patients with a full-thickness skin graft (FTSG) donor site in the retroauricular region? Herein, we evaluated complications related to face mask use in 27 patients with a retroauricular FTSG donor site, with the goal of clarifying whether the retroauricular region is still an appropriate FTSG donor site in the context of the COVID-19 pandemic. Methods: Complications in 27 patients treated by FTSGs harvested from the retroauricular region from 2019 to 2021 were investigated. A questionnaire comparing the normal and the operated sides was administered. Pain, itching, soreness, deformity, and symmetry were further investigated. Results: Pain and itching were the only observed complications. The operated side was slightly more painful than the normal side in four patients (14.8%), and four patients (14.8%) reported itching on the operated side. However, all patients who experienced complications stated that the pain or itching did not interfere with mask wearing. Most symptomatic patients were older than 60 years of age (23.8%, p= 0.185) and wore masks for longer periods of time (28.5%, p= 0.326). Conclusion: Few retroauricular donor site-related complications occurred, and none of these complications caused inconvenience in daily life. Therefore, in the COVID-19 pandemic, the use of the retroauricular region as an FTSG donor site remains appropriate.

• Journal of Chest Surgery
• /
• v.37 no.7
• /
• pp.553-558
• /
• 2004

Avoiding cardiopulmonary bypass (CPB) in coronary artery bypass grafting (CAB G) has been known to reduce early mortality and morbidity. Diabetes Mellitus is a significant risk factor for adverse early and late outcomes after CABG. We compared the clinical results of off-pump CABG versus on-pump CABG in diabetes patients. Material and Method: 682 patients (424 off-pump CABG and 258 on-pump CABG) underwent isolated coronary artery bypass grafting between January 2001 and June 2003. Data were collected 242 patient who had diabetes. Among them, 154 patients underwent off-pump CABG and 90 patients underwent on-pump CABG. We analyzed the preoperative risk factors and postoperative results between 2 groups. Result: Two groups did not show statistical differences in age, sex, coronary and operative risk factors. Operative time was significantly shorter in off-pump CABG, however, number of grafts was fewer in off-pump CABG. Postoperative inotropic usage was lower in off-pump CABG. Postoperative CK-MB level was lower in off-pump CABG, and ICU stay and ventilation time was significantly shorter in off-pump CABG. However, there was no statistical difference between 2 groups in operative mortality, reoperation rate, perioperative myocardial infarction, wound infection, renal failure, neurological complications and hospital stay. Conclusion: Off-pump CABG group showed less myocardial damage and early recovery. We concluded that off-pump CABG is the more reasonable technique in diabetes patients although two techniques showed good results. The long-term follow up and prospective study may be warranted.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).