• 한국콘텐츠학회논문지
• /
• 제11권7호
• /
• pp.497-507
• /
• 2011

본 논문은 건축자재들을 컴포넌트와 패턴으로 조립하여 패턴 단위로 건축설계가 효율적으로 이루어질 수 있도록 하는 스틸하우스 설계 인터페이스를 개발한다. 또한 이 기술을 이용하여 건축의 공정에 설계, 분석, 변경정보, 조립 등의 건축설계를 시뮬레이션을 통하여 건축의 손쉬운 변경과 비용을 효과적으로 절감하기 위한 기술을 지원하는 조립 건축설계 시스템 개발을 목적으로 한다. 특히 설계자와 사용자도 패턴을 이용하여 쉽게 건축물을 변경시킬 수 있으며 변경에 따라 필요한 자재들의 패턴 정보와 변경된 건축물의 설계도가 자동 생성된다. 또한 개인의 숙련도나 지식 가시화를 통해 발생할 수 있는 지식검색 역시 구현 목표로 한다.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.84-92
• /
• 1999

Excellence of the Korean traditional paper(Hanji) can be proved by literatures and legacies handed down from generations. However, with the problems pertaining to a majority of traditional manufactures, Hanji industry was declined because of low productivity, insufficient supply of raw material , and reduced demand. therefore, modernizxation of the Hanji technology and development of new uses are very important. This study was carried to investigated the papermaking characteristics of Morus spp.(M.alba, M.Bombycis, and M.Ihou) for new Hanji, modernize manufacturing process of Hanji by grafting on developed modern pulping and papermaking technology, develop the various uses, and establish the foundation for development of high value-added products. Hanji is made from M.Ihou, while stalk , and sulfomethylated pulp gave better sheet formation and higher brightness than those of the others. Physical properties of Hanji which made from bast fiber pulps were better than those of whole stalk pulps. Hanji which made from M.bombycis bast fiber and whole stalk pulps were not so good sheet strength as other species. Sulfomethylated whole stalk pulps were shown better sheet strength than alkali and alkali-hydrogen peroxide whole stalk pulps.

• 한국식품조리과학회지
• /
• 제20권3호
• /
• pp.247-255
• /
• 2004

The foodservice industry is changing more and more from on-site foodservice management to contract foodservice management. However there are differences according to the level of management and operation of contract foodservice management company (CFMC). The necessity of certification on CFMC is increasing to enable fair discrimination of CFMC among most clients that want to contract with CFMC. This study was performed to identify the foodservice operation evaluation model's criteria items for certifying CFMC. The analysis research methods included literature review, content analysis, individual interview, Delphi technique, and brain storming. First, the following infrastructure items were prepared in the contractor's viewpoint: procurement, transparency of operation, menu development and operation system, nutrition service system, professional employee education, sanitation andsafety management system, customer satisfaction system, facility system, management information system (MIS), business and economics. Second, the evaluation criteria required by the contractor on the client's view point was similar to school foodservice, hospitalfoodservice, and business andindustry foodservice except extraordinary items of field. Third, evaluation criteria and detail categories and items were identified such as financial focus, customer focus, process focus, human focus, and renewal and development by grafting on intellectual capital evaluation methodology for CFMC.

• Carbon letters
• /
• 제13권4호
• /
• pp.212-220
• /
• 2012

Orange peel (OP) exhibits a sorption capacity towards anionic dyes such as reactive blue 19 (RB19). Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used to modify the surface nature of OP to enhance its adsorption capacity for anionic dyes from an aqueous solution. Four adsorbents were investigated: the OP, sodium hydroxide-treated OP (SOP), CTAB-modified OP and CTAB-modified SOP. The physical and chemical properties of these sorbents were determined using nitrogen adsorption at 77 K and by scanning electron microscope and Fourier transform infrared spectroscopy techniques. The adsorption of the RB19 dye was assessed with these sorbents at different solution pH levels and temperatures. The effect of the contact time was considered to determine the order and rate constants of the adsorption process. The adsorption data were analyzed considering the Freundlich, Langmuir, Elovich and Tempkin models. The adsorption of RB19 by the assessed sorbents is of the chemisorption type following pseudo-first-order kinetics. CTAB modification brought about a significant increase in RB19 adsorption, which was ascribed to the grafting of the sorbent with a cationic surfactant.

• Fibers and Polymers
• /
• 제4권3호
• /
• pp.107-113
• /
• 2003

The branched polypropylene (b-PP) was prepared by melt blending process with initiator, antioxidant, and functional monomers to improve the melt strength through the melt grafting. The melt flow index (MFI) of the b-PP was increased with increasing the initiator content. On the introduction of the alkylamine as the branching agents the MFI of the b-PP was increased, while that of the b-PP with the pentaerythritol triacrylate (PT) was decreased. It may be caused by the chain scission of the i-PP backbone due to the reduced thermal stability of the i-PP on the melt blending. The MFI of the b-PP without the antioxidant was increased due to the chain scission occurred during the melt processing, while on the introduction of the antioxidant, the MFI of the b-PP was decreased. The crystallization temperature of the b-PP was higher than that of PP, which was attributed to the branched chain structure. It was found that the PT was the most effective functional monomers for enhancing the melt properties of the b-PP.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.535-542
• /
• 2012

Recently, the study on small-sized reconnaissance robot has been progressed through grafting robot technology to military fields for minimizing the casualties. Especially, throwable robots have been focusing for their's efficiency in anti-terror operation. However, it is impossible to launch throwable robot to long range(approximately 100m) by hand. So we need another type of robots, so called launchable robots, which can launch farther and is more accurate by launcher. In this paper, we presented the process of developments of launchable robots('launchbot') which are available for remote launch from collection of user's opinions to field test. Based on the opinions of users, we established the goal of development, designed and manufactured the robots. Through the field test, we found that our launchable robot satisfied the performance requirements.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.1-10
• /
• 2011

자동화된 반응 열량계를 이용하여 중합비율을 관찰하면서 blockiness가 다른 PVOH를 이용하여 VAE 에멀젼을 합성하였다. 입자 분포도를 관찰 결과 단량체와 물과 비율에 따른 일정한 그라프트율은 없었다. 초기 단량체-물의 비율이 낮은 곳에서 겔 효과가 관찰되었다. 또한 입자 분포는 넓고 이중 피크가 관찰되었다. 지속적으로 제한적으로 응징집되면서 입자성장이 이루어지는 것이 관찰되었다. 이것은 제한적인 응집현상과 사슬이 PVOH로 그라프팅되어 발생한 결과로 판단된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권1호
• /
• pp.46-52
• /
• 2009

The maxillary posterior edentulous region presents unique and challenging conditions in implant dentistry. The height of the posterior maxilla is reduced greatly as a result of dual resorption from the crest of the ridge and pneumatization of the maxillary sinus after the loss of teeth. Materials previously used for sinus floor grafting include autogenous bone, allogeneic bone, xenogenic bone and alloplastic materials. Autogenous bone is the material of choice, but its use is limited by donor-site morbidity, complications, sparse availability, uncontrolled resorption and marked volume loss. One way to overcome this problem would be to use bone substitutes alone as a osteoconductive scaffold for bone regeneration from the residual bone or in combination with allogeneic bone, which also has osteoinductive properties. The purpose of this article is to describe a double layers technique of demineralized and mineralized bone graft materials instead of autogenous bone in sinus floor augmentation of deficient posterior maxillary alveolar process and to report our experience with this technique. Our results show that maxillary sinus augmentation using mineralized and demineralized bone materials, when installed simultaneously with the implant or not, is good results for bone healing.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.549-559
• /
• 1997

The purpose of this study was to evaluate clinical changes in graft size after treatment with strip gingival autograft in human. 57 premolar teeth in 27 patients having the following mucogingival problems were selected. The width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth were measured at the initial examination, 2, 12 and 24 weeks following the strip gingival autograft and free gingival autograft. The change of width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth according to healing process in both graft procedures was statistically analyzed by repeated measure ANOVA test and independent t-test using SPSS program. The results were as follows : 1. The change of keratinized gingiva in both graft procedures was increased significantly at 24 weeks post-op. 2. The clinical sulcus depth exhibited no marked changes throughout the entire investigation in both graft procedures. 3. No dimensional variation was seen in graft size in both graft procedures. 4. Shrinkage did not differ significantly in both graft procedures. From the day of grafting to 24 weeks after surgery the percentages of shrinkage were : strip gingival autograft 28% and free gingival autograft 29%.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.327-333
• /
• 2005

pH-sensitive hydrogels were studied as a drug carrier for the protection of insulin from the acidic environment of the stomach before releasing it in the small intestine. In this study, hydrogels based on poly(ethylene oxide) (PEO) networks grafted with methacrylic acid (MAA) or acrylic acid (AAc) were prepared via a two-step process. PEO hydrogels were prepared by ${\gamma}-ray $ irradiation (radiation dose: 50 kGy, dose rate: 7.66 kGy/h), grafted by either MAA or AAc monomers onto the PEO hydrogels and finally underwent irradiation (radiation dose: 520 kGy, dose rate: 2.15 kGy/h). These grafted hydrogels showed a pH-sensitive swelling behavior. The grafted hydrogels were used as a carrier for the drug delivery systems for the controlled release of insulin. Drug-loaded hydrogels were placed in simulated gastric fluid (SGF, pH 1.2) for 2 hr and then in simulated intestinal fluid (SIF, pH 6.8). The in vitro drug release behaviors of these hydrogels were examined by quantification analysis with a UV-Vis spectrophotometer.