• 한국CDE학회논문집
• /
• 제6권2호
• /
• pp.125-132
• /
• 2001

An algorithm for generating all hexahedral meshes for three dimensional objects has been presented. This algorithm is based on the sweeping and the grafting method. In sweeping process internal nodes generating method has been modified by employing the distances between nodes on connecting surfaces and on source surfaces. In addition to the sweeping processes grafting algorithm is also modified to obtain more effective meshes by refining elements near grafting surfaces. With this method two and a half dimensional hexahedral meshes for three dimensional objects can be generated effectively. Sample meshes are constructed to demonstrate the mesh generating capability of the proposed algorithm.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.453-461
• /
• 2008

This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.24-33
• /
• 2016

The grafting reaction for maleic anhydride (MA) onto high density polyethylene (HDPE) was investigated from solution process with initiators. The chemical modification of neat HDPE was carried out with various contents of MA (3-21 wt.%) and initiator (0.2-1 wt.%) at different temperature ($80-130^{\circ}C$). The grafting degree was obtained from the titration and the highest grafting degree was 3.1%. The grafting degree increased as the content of MA and initiator increased, however, the highest grafting degree was demonstrated for a particular content of MA and initiator. In the non-isothermal crystallization kinetics, the Ozawa model was unsuitable method to investigate the crystallization behavior of MA onto HDPE, whereas the Avrami and Liu models found effective. The crystallization rate was accelerated as the cooling rate increased, but postponed by combination of MA onto neat HDPE backbone.

• 공업화학
• /
• 제7권5호
• /
• pp.946-953
• /
• 1996

동시조사법에 의한 아크릴산의 폴리프로필렌 부직포에 대한 그라프트 반응에서 조사량, 조사선량률, 금속염 및 용매가 그라프트 반응에 미치는 영향을 조사하였다. 같은 조사선량에서는 선량률이 낮을수록 높은 그라프트율을 나타냈다. 한편 조사선량률을 달리하여 일정 시간 동안 그라프트 반응시키면 조사선량률이 높을수록 그라프트율은 높았으며, 첨가한 금속염의 종류에 관계없이 그라프트 속도는 조사선량률의 0.74 차수에 비례하였다. 사용한 금속염 중에서 $FeSO_4{\cdot}7H_2O$가 가장 우수하였으며, 첨가제의 함량이 증가하면 할수록 그라프트율은 감소하였지만 적정농도이하에서는 그라프트용액이 고화되어 그라프트 반응시킬 수 없었다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.1-11
• /
• 2006

접목 과정에서 형성되는 새로운 2차목부의 특징을 광학현미경 및 전자현미경적 차원에서 조사하고자 해송(Pinus thunbergii)을 사용하여 자가접목(autograft)을 실시하였다. 조직학적으로 접목은 괴사층의 형성, 치유조직(callus)의 형성 및 발달, 새로운 형성층의 분화 및 새로운 2차조직의 형성 등 4단계를 거치는 것으로 나타났다. 접목 초기에 형성된 괴사층은 펙틴과 리그닌 성분으로 구성되어 있었으며, 점진적으로 분해되어 대목과 접수가 결합하는 시점에 소멸되었다. 접목 초기에 축적되었던 전분 입자와 지질은 접목이 진행될수록 점진적으로 감소하였으며 세포질 내 소기관, 핵 및 원형질연락사의 변화는 관찰되지 않았다. 유세포로 구성된 치유조직으로부터 접목 15일후부터 새로운 형성층(neocambium)이 발달하였으며, 이곳에서 새로운 2차조직이 형성되기 시작했다. 새로운 2차목부는 형성층에서 기원하는 정상적인 2차목부와는 다른 분화 및 형태를 나타냈다. 새로운 2차목부는 망상 또는 벽공상의 비후에 의한 2차벽을 갖는 가도관 요소에서 기원하였으며, 2차벽의 형성은 비후된 세포벽 사이를 충전시키는 형태로써 진행되었다. 2차벽의 형성은 불균일하고 간헐적이었으며 형성된 2차벽의 두께는 불균일하였다. 새로운 2차목부의 가도관은 S자 또는 소용돌이 모양을 지니는 것으로 수평 방향으로 배열되었다.

• Membrane and Water Treatment
• /
• 제6권5호
• /
• pp.411-422
• /
• 2015

Membrane modification by different concentrations of acrylic acid has been described. Grafting of acrylic acid to the surface of a polypropylene membrane was obtained by a Fenton-type reaction. Membrane permeability seemed to have been dependent on the value of pH in the solution. To explain tendency, a simple theoretical model was developed. The model incorporates explicitly statistical conformations of a polyacid chain grafted onto the pore surface. The charged capillary model with a varying diameter for porous membranes was then used to evaluate the permeability of the membrane. It has been shown both theoretically and experimentally that the permeability of a grafted membrane depends on the pH of the solution.

• Journal of Periodontal and Implant Science
• /
• 제30권3호
• /
• pp.639-650
• /
• 2000

The purpose of this study was to evaluate clinical changes in graft size after treatment with connective tissue autograft in human. 40 premolar teeth in 23 patients having the following mucogingival problemswere selected. The width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth were measured at the initial examination, 2, 12 and 24 weeks following the connective tissue autograft and free gingival autograft. The change of width of extension, attached gingiva including free marginal gingiva, width of transplant and clinical sulcus depth according to healing process in both graft procedures was statistically analyzed by ANOVA test and independent ttest using SPSS program. The results were as follows : 1. The change of keratinized gingiva in both grafting procedures was increased significantly at 24 weeks post-op. 2. The clinical sulcus depth exhibited no marked changes throughoutthe entire investigation in both grafting procedures. 3 . After 12 weeks, no dimensional variation was seen in graft size in both grafting procedures. 4. Shrinkage differs significantly in both grafting procedures. From the day of graft to 24 weeks after surgery the percentages of shrinkage were connective tissue autograft 55% and free gingival autograft 29%.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.413-416
• /
• 2006

PtRu catalyst is most widely used as anode catalyst for a direct methanol fuel cell(DMFC). To promote the efficiency of the catalysts, it Is important to increase the triple phase boundary. In this study, we have tried to increase the triple phase boundaries in preparing electrocatalysts of the fuel cells, based on the process of grafting a proton-conducting agent onto the catalyst This grafted proton-conducting agent can act as an ionomer like Nafion, currently widely used ionomer. First, we have prepared the 80wt% PtRu/Ketjen Black electrocatalyst by an improved colloidal method. And, we have grafted methylsulfonate groups $(-CH_2SO_3H)$ into the catalyst as proton-conducting agents. As results of cyclic voltammety and single cell test of the membrane electrode assembly (MEA), we can conclude that the activity of the grafted electrocatalysts is superior to that of conventional ones, in performance of DMFCs. For our further study, we will investigate the optimum ratio of catalyst/grafted proton conduct Ing agent with maximum performance of a DMFC.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권4호
• /
• pp.365-378
• /
• 1995

Allogeneic bone grafting has recently been used in oral and maxillofacial regions to restore the cosmetic and functional problem. There are several types of allogeneic bone grafts ; bone powder, bone chips, bone blocks. Empirically, it is thought to be better to combine the allogeneic bone chips to any type of tissue adhesive not to displace during packing and condensing. But, there are no reports about using tissue adhesive in allogeneic bone grafting. This experimental study is designed to investigate the effect of the fibrin adhesive on bone healing process after demineralized allogeneic bone grafting in 60 rats. In control groups (30 rats), routine demineralized allogeneic bone grafting were done in 7 ${\times}$ 7mm calvarial bone defects which were drilled intentioally. And we used the fibrin adhesive for holding the bone particle in experimental groups (30 rats). Each experimental specimen was sacrified at 1, 2, 4, 6, 8 weeks postoperatively The results were as follows : 1. The degree of inflammatory cell infiltrations were more prominent in experimental than in control groups till 2 weeks. 2. Early fibroblast proliferation and new capillary proliferation were uncorporated around graft sites in the experimental groups later than in control groups at early stages. 3. Osteoblastic activity in control group was more prominent at 2 weeks. 4. Osteoblastic activity in experimental groups was more prominent than in control group till 4 weeks. 5. New bone formation was more in control group than experimental group till 3 weeks, but similar appearance after that time. As above results, initial bone healing within 2 weeks were more processed in without adhesive group than with adhesive group. But above 4 weeks; similar bone healing were observed.

• Archives of Plastic Surgery
• /
• 제40권5호
• /
• pp.542-545
• /
• 2013

Background The aims of alveolar bone grafting are closure of the fistula, stabilization of the maxillary arch, support for the roots of the teeth adjacent to the cleft on each side. We observed nostril base augmentation in patients with alveolar clefts after alveolar bone grafting. The purpose of this study was to evaluate the nostril base augmentation effect of secondary alveolar bone grafting in patients with unilateral alveolar cleft. Methods Records of 15 children with alveolar clefts who underwent secondary alveolar bone grafting with autogenous iliac cancellous bone between March of 2011 and May of 2012 were reviewed. Preoperative and postoperative worm's-eye view photographs and reconstructed three-dimensional computed tomography (CT) scans were used for photogrammetry. The depression of the nostril base and thickness of the philtrum on the cleft side were measured in comparison to the normal side. The depression of the cleft side pyriform aperture was measured in comparison to the normal side on reconstructed three-dimensional CT. Results Significant changes were seen in the nostril base (P=0.005), the philtrum length (P=0.013), and the angle (P=0.006). The CT measurements showed significant changes in the pyriform aperture (P<0.001) and the angle (P<0.001). Conclusions An alveolar bone graft not only fills the gap in the alveolar process but also augments the nostril base after surgery. In this study, only an alveolar bone graft was performed to prevent bias from other procedures. Nostril base augmentation can be achieved by performing alveolar bone grafts in children, in whom invasive methods are not advised.