• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.453-461
• /
• 2008

This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.99-101
• /
• 1998

1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

• Nuclear Engineering and Technology
• /
• 제13권4호
• /
• pp.245-253
• /
• 1981

고분자피복재 중 polyethylene은 전기적 절연성 및 내방사선성이 좋으나 난연성이 결여되어 있으므로 이 단점을 개질하였다. 방사선을 이용하여 polyethylene에 여러 종류의 난연제를 고착시켰는데 grafting 방법과 blending후 crosslinking 방법을 사용하였다. 일반적으로 grafting시키는 경우 시료에 난연제가 고착되는 량은 방사선선량이 증가할수록 증가하였다. Grafting 방법으로 polyethylene에 난연제를 고착시킬 때 시료를 팽윤(swelling)시켜서 난연제를 grafting시켜야 한다. Blending 한 후 crosslinking시킨 경우 시료와 난연제의 량을 자유롭게 조절하여 blending하여 crosslinking시킬 수 있는 이질이 있다. 난연제를 고착시키는 2가지 방법중 blending후 crosslinking 시키는 방법이 가장 바람직하다.

• Macromolecular Research
• /
• 제11권1호
• /
• pp.14-18
• /
• 2003

Grafting of glycidyl methacrylate (GMA) upon coralline hydroxyapatite in conjugation with demineralized bone matrix (CHA-DBM) using equal molar ratio of potassium persulfate/sodium metabisulfite redox initiating system was investigated in aqueous medium. The optimum reaction condition was standardized by varying the concentrations of backbone, monomer, initiator, temperature and time. The results obtained imply that the percent grafting was found to increase initially and then decrease in most of the cases. The optimum temperature and time were found to be 50 $^{\circ}C$ and 180 min, respectively, to obtain higher grafting yield. Fourier transform infrared (FT-IR) spectroscopy and X-ray powder diffraction (XRD) method were employed for the proof of grafting. The FT-IR spectrum of grafted CHA-DBM showed epoxy groups at 905 and 853 $cm^{-1}$ / and ester carbonyl group at 1731 $cm^{-1}$ / of poly(glycidyl methacrylate) (PGMA) in addition to the characteristic absorptions of CHA-DBM, which provides evidence of the grafting. The XRD results clearly indicated that the crystallographic structure of the grafted CHA-DBM has not changed due to the grafting reaction. Further, no phase transformation was detected by the XRD analysis, which suggests that the PGMA is grafted only on the surface of CHA-DBM backbone. The grafted CHA-DBM will have better functionality because of their surface modification and hence they may be more useful in coupling of therapeutic agents through epoxy groups apart from being used as osteogenic material.

• 한국산림과학회지
• /
• 제109권2호
• /
• pp.243-247
• /
• 2020

본 연구는 기존의 양접법(field grafting) 기반 유경접목법과 개선된 거접법(bench grafting) 기반 유경접목법의 묘목 활착률 및 각각 생산된 묘목의 등급(상·중·하품) 비율과 묘목 생산 시 단순 수익률을 비교·분석하여 효율적인 접목방법을 제시하기 위해 실시되었다. 2년 간 평균 접목활착률은 각각 기존 유경접목법 30.3%, 개선 유경접목법 77.1%로 나타나 개선방법의 묘목활착률이 2배 이상 높았다. 생산된 묘목 등급은 기존 유경접목법의 경우, 상·중·하품의 비율이 2:3:5, 개선 유경접목법은 3:4:3으로 나타나 개선방법의 '상품' 및 '중품' 묘목 비율이 20% 가량 증가한 것으로 확인되었다. 투입비용 대비 판매수익으로 효율성을 계산한 결과, 기존 유경접목법 1.08, 개선 유경접목법 1.59로 개선방법의 수익률이 약 1.5배 높은 것으로 나타났다. 따라서 개선된 거접법 기반 유경접목법은 적은 비용으로 고품질의 접목묘 생산이 가능할 것으로 판단됨에 따라 효율적인 묘목생산 및 보급으로 고품질 과실생산을 통한 생산자의 소득향상에 크게 기여될 것으로 사료된다.

• The Plant Pathology Journal
• /
• 제19권5호
• /
• pp.257-259
• /
• 2003

This report described a simple, inexpensive, faster, and effective graft inoculation method for the artificial transmission of Mungbean yellow mosaic virus (MYMV). Success of grafting and disease transmission was 100％ in this method. Screening of mungbean germplasm using this method will prevent the chance of escape infection, probably as a consequence of non-preference mechanism and loss of vector infectivity. The grafting method described here is applicable to both screenhouse and field trials.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.24-33
• /
• 2016

The grafting reaction for maleic anhydride (MA) onto high density polyethylene (HDPE) was investigated from solution process with initiators. The chemical modification of neat HDPE was carried out with various contents of MA (3-21 wt.%) and initiator (0.2-1 wt.%) at different temperature ($80-130^{\circ}C$). The grafting degree was obtained from the titration and the highest grafting degree was 3.1%. The grafting degree increased as the content of MA and initiator increased, however, the highest grafting degree was demonstrated for a particular content of MA and initiator. In the non-isothermal crystallization kinetics, the Ozawa model was unsuitable method to investigate the crystallization behavior of MA onto HDPE, whereas the Avrami and Liu models found effective. The crystallization rate was accelerated as the cooling rate increased, but postponed by combination of MA onto neat HDPE backbone.

• Archives of Plastic Surgery
• /
• 제38권3호
• /
• pp.222-227
• /
• 2011

Purpose: Autogenous particulate bone grafting is a type of autogenous bone graft that consists of small particles of cortical and cancellous bone. Autogenous particulate bone grafting has been used for calvarial bone defect after calvarial defect of craniosynostosis and prevention of temporal depression after fronto-orbital advancement. The results were followed up and studied for effectiveness of autogenous calvarial particulate bone grafting. Methods: Cranial vault remodeling and fronto-orbital advancement was performed for six craniosynostosis patient from August 2005 to October 2007. Autogenous particulate bone grafting was harvested from endocortex of separated cranial vault and if insufficient, from extocortex of occipital region using Hudson brace & D'Errico craniotomy bit and was grafted on the calvarial bone defect of cranial vault and temporal hollow. Fibrin glues were added to the harvested particulated bone for adherence and shaping of paticles. Results: Autogenous particulate bone grafting was followed-up at least longer than I year. The calvarial bony defects following primary cranial remodeling were successfully covered and postoperative temporal depressions after fronto-orbital advancement were also well prevented by grafted particulated bone. Conclusion: Autogenous calvarial particulate bone graft can be harvested in infants and young children with minimal donor site morbidity. It effectively heals cranial defects in children and during fronto-orbital advancement reduces the prevalence of osseous defects independent of patient age. It's easy and effective method of reconstruction of calvarial defect.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권6호
• /
• pp.529-536
• /
• 2010

Purpose: The Purpose of this study is to show the total survival rate of implants with maxillary sinus grafting and the effects that reach the survival rate by classifying types of graft materials, implant type, operation method, residual bone height and evaluate graft material resorption rate after sinus grafting Patients and Methods: 61 dental implants placed with sinus bone grafting in 24 patients at Wonkwang University Sanbon Dental Hospital were installed simultaneously or after regular healing. Various bone grafts (autograft, xenograft, allograft, alloplast) and fourth implant type (GSII, Xive, Implantium, Novel biocare) were used. All implants were investigated clinically and radiographically, being with average 20 months follow-up period after installation. Results: 3 fixtures were lost, resulting in 95.1% cumulative survival rate of 61 osseointegrated dental implant. Survival rate according to bone material type, Implant type, operation method, residual bone height, have no statistically significant differencies. The mean preoperative residual alveolar bone height was 4.75 mm, average postoperative height of graft materials 10.8 mm, vertical bone resorption rate was 10% after 2 years. Resorption rate according to operation method was 7% (simultaneous) and 5% (delayed) after 1 year. Conclusion: It can be suggested that maxillary sinus grafting may have predictable result with various bone graft materials and implant type, residual bone height, operation method

• 공업화학
• /
• 제7권5호
• /
• pp.938-945
• /
• 1996

Co-60 조사하에서 동시조사법으로 폴리프로필렌 부직포에 스틸렌을 그라프트 중합반응시키면서 조사량, 조사선량률, 용매효과, 산 및 다관능성 단량체의 첨가효과에 대하여 고찰하였다. 같은 조사량의 경우 조사선량률이 낮을수록 그라프트율은 증가하였다. 초기의 그라프트 반응속도는 조사선량의 0.56차수에 비례하였다. 산을 그라프트용액에 첨가하면 전 농도 범위에서 그라프트율이 향상되었으며, 또한 다관능성 단량체를 첨가하여도 그라프트율이 증가하였다. 2개의 비닐기를 가진 DVB에 비하여 3개의 비닐기를 가진 TMPTA를 첨가하면 더 높은 그라프트율을 나타냈다. 한편 산과 다관능성 단량체를 동시에 첨가하면 별개로 첨가한 것보다 훨씬 높은 그라프트 촉진 효과를 나타냈다.