• KSBB Journal
• /
• v.22 no.3
• /
• pp.157-161
• /
• 2007

This study is to investigate the biological degradation and the characteristics of MEA, a pH regulator to be put in the cooling water circulation system for power plants, loading to elevate concentrations of COD and N when eluted into the water environment. MEA, $NH_4^+$ and CODcr were monitored in flask cultures and in a batch aerator. MEA was found to be biologically degradable, producing substantial amount of ammonia (max. 78.1%) in a form of $NH_4^+$ and other carboneous intermediates. The degradation reaction rates were similar one another over all MEA concentrations tested as the activated sludge (microbial consortium) was acclimated to MEA with the gradual and stepwise increase in MEA input into the batch aerator. Also, MLVSS kept increasing with increasing MEA input. The COD-based degradation reaction order was determined to be 1.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.36-41
• /
• 2000

This study was carried out to introduce functional groups onto wood by reacting with 2-methacryloyloxyethyl isocyanate(MOI). The effects of the catalyst and the reaction conditions(temperature and time) on the treatment were investigated. The evidence of bonding between wood and MOI were examined by infrared(IR) spectroscopy. The change in surface characteristics of MOI treated wood was examined by water contact angle measurement and X-ray photoelectron spectroscopy(XPS). Wood reacted quickly with MOI in the presence of di-n-butiltin dilaurate catalyst. Especially, the increase in weight percent gain(WPG) with increasing in reaction time was remarkable at the reaction temperature of over $50^{\circ}C$. The IR spectrum of wood reacted with MOI showed a strong urethane absorption(1715 $cm^{-1}$) but no isocyanate(2235 $cm^{-1}$) absorption. It also showed a sharp olefinic C=C double bond absorption at 1635 $cm^{-1}$. This means that an introduced methacrylate group becomes the starting point of further graft copolymerization with another vinyl monomers. The wood modified with MOI showed a gradual increase in contact angle with increasing in WPG, which means that the hydrophilic wood surface become quite hydrophobic. Also, it was cleared that most parts of the wood surface were modified with MOI by XPS analysis.

• Fashion & Textile Research Journal
• /
• v.19 no.1
• /
• pp.49-60
• /
• 2017

In this study, change trends and specific times for change in body size were sought to be identified by using manual measurements for Korean adult women at 20 to 89 of age, along with examinations of change trends and specific times of change in body shape based on body index values. The examinations of means, deviations, and variation coefficients revealed that there was a tendency of most height related measures to decrease. In addition, combined with decrease in height, growth in weight led to increased BMI, thus resulting in increase in measures of circumference, thickness, and breadth in the torso area. The BMI trends showed that with increasing age, BMI increased, reaching the peak between the ages of 55 and 59 and then decreasing from 64 of age, with the steepest increase in BMI at ages from 50 to 54. The examination of differences in the body flatness ratio for different parts of body found that with increasing age the ratio decreased, indicating a tendency for gradual change to round body shapes. The analysis of 3D body shape found that there were more back-bends and lowered shoulder levels with age, accompanied with a tendency for more bended legs and more inclined-forward necks. The key trends in changes in body measurements by age and detailed estimates of 3D standard body shape drawn out from this study are expected to significantly contribute to establishing a basic database for generating patterns reflecting age features of Korean adult females.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.664-668
• /
• 2002

In this work, the catalytic reduction mechanisms of NO over ACFs/copper prepared by electrolytic copper plating has been studied. It was found that copper content on carbon surfaces increased with increasing the plating time. However, a slightly gradual decrease of adsorption properties, such as, BET specific surface area, was observed in increasing the plating times within the range of well-developed micropore structures. As experimental results, nitric oxide was converted into the nitrogen and oxygen on ACFs and ACFs/copper catalyst surfaces at $500^{\circ}C$. Especially, the surfaces of ACFs/copper catalyst were found to scavenge the oxygen released by catalytic reduction of NO, which could be explained by the presence of another nitric oxide reduction mechanism between ACFs and ACFs/copper catalysts.

• Polymer(Korea)
• /
• v.26 no.6
• /
• pp.812-820
• /
• 2002

The positive temperature coefficient (PTC) characteristics of polymer composites were investigated with the nano-sized carbon black particles using solution tasting and melt compounding methods. The polymeric PTC composites should the electrical threshold at 35 wt% for the melt compounding method and 40 wt% for the solution casting method. The ethylene vinylacetate copolymer (EVA) composite showed a gradual increase of resistance as a function of temperature and showed a maximum at the polymer molting point. The resistance of the high-density polythylene (HDPE) composite remains unchanged with temperature but started to Increase sharply near the melting point of HDPE and showed a maximum resistance at the melting point of HDPE. The dispersion of nano-sized carbon black particles was investigated by scanning electron microscopy (SEM) and low resistance after electrical threshold, and both methods exhibited a well dispersed morphology. When the electric current was applied to the PTC composites, the resistance started increasing at the curie temperature and further increased until the trip temperature was roached. Then the resistance remained stable over the trip temperature. The secondary increase started at T$\sub$m/ of matrix polymer and kept increasing up to the trip temperature.

• Food Science of Animal Resources
• /
• v.36 no.5
• /
• pp.601-611
• /
• 2016

The objective of this study was to evaluate effects of Gaeddongssuk powder (GP) on quality characteristics and shelf stability of emulsion sausages during storage. Proximate composition properties showed no significant differences in all treatment (p>0.05). Control showed the highest cooking loss while the treatment with GP showed decreased cooking loss depending on increasing GP content (p<0.05). Apparent viscosity of batter was increased as the amount of GP increased, whereas hardness of emulsion sausages was decreased with increasing GP level. In sensory evaluation, emulsion sausage with 0.1% GP resulted in the highest score in overall acceptability. The pH values of all treatments decreased at the early storage stage, followed by gradual increase. The lightness and redness of treatments were decreased when the level of GP was increased. However, the yellowness of sausages with GP were higher than that of control (p<0.05). The addition of GP inhibited lipid oxidation of emulsion sausages during storage depending on its level. The aerobic bacteria population and VBN was unaffected by addition of GP during the storage (p>0.05). Therefore, Gaeddongssuk powder up to 0.1% has a potential as a natural antioxidant for meat products because it can inhibit lipid oxidation of sausages without decreasing their sensory properties.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.242-247
• /
• 2005

In this study, we investigated the removal efficiencies of pollutants and permeate fluxes depending on chemistry of feed water, various molecular weight cut-offs (MWCOs) and materials of membrane, operating pressure. We used seven MWCO membranes of YC0.5, YM1, YM3, YM10, YM30, YM100 and PM30, humic acid solution and surface water as feed water, and examined variation in permeate flux. Results of TOC removal experiment demonstrate that MWCO lower 1,000daltons could remove humic acid effectively. As increasing solution pH and decreasing divalent cations ($Ca^{2+}$) concentration, TOC removal increased. But $UV_{254}$ removal efficiency increased with higher divalent cation concentration and solution pH. Membrane fouling increased with increasing electrolyte (NaCl), divalent cation concentration and decreasing solution pH. In spite of initial permeate flux of the hydrophobic membrane (PM30) was higher than that of the hydrophilic membrane (YM30), flux decline of PM30 was significant during operation. At higher operating pressure, compactness of the cake layer on the membrane surface increased, resulting in gradual increase in hydraulic resistance.

• The Korean Journal of Mycology
• /
• v.47 no.3
• /
• pp.219-232
• /
• 2019

Chemicals related to hydrogen peroxide ($H_2O_2$) and nitric oxide (NO) generations were exogenously applied to Fusarium oxysporum f. sp. fragariae (Fof) causing Fusarium wilt disease in strawberry plants, and regulations of in vitro conidial germination and mycelial growth of the fungus by the chemical treatments were evaluated. $H_2O_2$ drastically reduced the conidial germination of Fof in a dose-dependent manner, and treatment with 3-amino-1,2,4-triazole (3-AT) catalase inhibitor also led to dose-dependent inhibition of conidial germination but relatively moderately. Gradual decreases in mycelial growth of Fof were found by high concentrations of $H_2O_2$, whilst exogenous 3-AT slightly increased the mycelial growth. Increasing sodium nitroprusside (SNP) NO donor, $N^G$-nitro-l-arginine methyl ester (L-NAME) NO synthase (NOS)-inhibitor and tungstate nitrate reductase (NR) inhibitor led to dose-dependent reductions in conidial germination of Fof in quite different levels. SNP conversely increased the mycelial growth but increasing L-NAME moderately decreased the mycelial growth. Tungstate strongly enhanced mycelial growth. Differentially regulated in vitro mycelial growths of Fof were demonstrated by SNP, L-NAME and tungstate with or without $H_2O_2$ supplement. Superoxide anion production was also regulated during the mycelial growth of Fof by nitric oxide. These results show that $H_2O_2$ and NO-associated enzymes can be suggested as fungal growth regulators of Fof as well as eco-friendly disease-managing agents in strawberry production fields.

• Mass Spectrometry Letters
• /
• v.12 no.4
• /
• pp.192-199
• /
• 2021

Alpine glaciers harbor a large quantity of bio-labile dissolved organic matter (DOM), which plays a pivotal role in global carbon cycling as glacial-fed streams are headwaters of numerous large rivers. To understand the complexity, origin, and fate of DOM in glaciers and downstream-linked streams and lakes, we elucidated the molecular composition of DOM in two different Tibetan Plateau glaciers, eight glacial-fed streams and five lakes, using an ultrahigh-resolution 15 Tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. The compositional changes of the DOM samples revealed that glacier DOM mostly exhibited sulfur-containing organic compounds (CHOS species). We also found that aliphatic formulae contributed more than 50% of the total abundance of assigned molecules in glacier samples, and those compounds were significantly related to CHOS species. The CHO proportions of glacial-fed streams and lakes samples increased with increasing distance from glacial terminals. The relative contribution of terrestrial-derived organics (i.e., lignins and tannins) declined while microbial-originated organics (aliphatics) increased with increasing elevation. This suggested the gradual input of allochthonous materials from non-glacial environment and the degradation of microbe-derived compounds along lower elevations. Alpine glaciers are retreating as a result of climate change and they nourished numerous streams, rivers, and downstream-linked lakes. Therefore, the interpretations of the detailed molecular changes in glacier ice, glacial-fed streams, and alpine lakes on the Tibetan Plateau could provide broad insights for understanding the biogeochemical cycling of glacial DOM and assessing how the nature of DOM impacts fluvial ecosystems.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.179-191
• /
• 2021

In this study, the strength and failure mechanism of red sandstones with combined defects were investigated by uniaxial compression tests on red sandstones with different crack angles using two-dimensional particle flow code numerical software, and their mechanical parameters and failure process were studied and analyzed. The results showed that the mechanical characteristics such as peak strength, peak strain, and elastic modulus of the samples with prefabricated combined defects were significantly inferior than those of the intact samples. With increasing crack angle from 15° to 60°, the weakening area of cracks increased, elastic modulus, peak strength, and peak strain gradually reduced, the total number of cracks increased, and more strain energy was released. In addition, the samples underwent initial brittle failure to plastic failure stage, and the failure form was more significant, leading to peeling phenomenon. However, with increasing crack angle from 75° to 90°, the crack-hole combination shared the stress concentration at the tip of the crack-crack combination, resulted in a gradual increase in elastic modulus, peak strain and peak strength, but a decrease in the number of total cracks, the release of strain energy reduced, the plastic failure state weakened, and the spalling phenomenon slowed down. On this basis, the samples with 30° and 45° crack-crack combination were selected for further experimental investigation. Through comparative analysis between the experimental and simulation results, the failure strength and final failure mode with cracks propagation of samples were found to be relatively similar.