• Journal of Science Education
• /
• v.42 no.2
• /
• pp.198-213
• /
• 2018

In recent years, descriptive evaluation has been gaining importance at school. The purpose of this study is to analyse descriptive evaluation items which have been made by school teachers. 300 items for regular examinations are collected from 7 middle schools (grades 1 through 3) in Gyeongnam Province. Distribution and types of items are examined to compare educational objectives of standard achievements and those of evaluation according to Bloom's revised taxonomy of educational objectives. The result shows that there exist a majority of shared subject units for descriptive evaluation. Huge difference of frequency is also found among subject units and standard achievements. Less than 65% of evaluation items are descriptive and the rest is simple completion or short answers. In addition, it reveals only 40.3% of agreement between educational objectives of standard achievements and those of evaluation items. The interviews with 27 teachers indicate that lack of ability to develop proper items and grading are the major obstacles. In conclusion, systematic training courses are to be provided in order to resolve issues over descriptive evaluation.

• Clinical and Experimental Reproductive Medicine
• /
• v.29 no.4
• /
• pp.237-243
• /
• 2002

Objective : The aim of this study was to evaluate the influence of different media on blastulation, mean cell number, percentage of inner cell mass (ICM) of total cells and ICM : trophectoderm (TE) ratio in mice. Materials and methods: A total 552 two cell embryos were retrieved from ICR female mice (4 weeks old) at 48 hr after hCG injection (mated just after hCG injection) and cultured in MEM (n=276) or TCM (n=276) supplemented with 20% hFF. The grading of blastocysts from zona-intact (ZiB) to -escape (hatching and hatched, ZeB) was performed at 72 hours after culture. Total, TE and ICM cell numbers were analyzed by differential staining of blastocyst. Statistical analysis was performed using t-test with SigmaPlot-2001. P-values < 0.05 were accepted as statistically significant. Results: The blastulation rate in MEM ($64.9{\pm}4.95%$) was significantly higher (p=0.0031) than that in TCM ($57.2{\pm}5.22%$). No differences were found in the number of ZiB and ZeB between MEM ($31.9{\pm}2.62$, $33.0{\pm}4.58%$), and TCM ($27.2{\pm}4.28$, $30.1{\pm}4.58%$). A total 314 blastocysts (MEM=166; TCM=148) were stained differentially. Mean cell number of blastocysts was significantly higher (p=0.0002) in TCM ($73.1{\pm}3.3$) than in MEM ($61.7{\pm}2.5$). Differential staining was successfully performed in 155 blastocysts (MEM=77; TCM=78). The percentage of ICM was significantly higher in MEM than in TCM ($20.9{\pm}1.3$ vs. $17.1{\pm}1.2%$, p=0.0281). The ICM : TE ratio was higher in TCM than in MEM (1 : $4.85{\pm}0.68$ vs. 1 : $3.78{\pm}0.78$, NS). Conclusion: These results show that MEM increase the blastocyst formation and percentage of ICM of total cells comparing with TCM in mice.

• Clinical and Experimental Reproductive Medicine
• /
• v.40 no.3
• /
• pp.122-125
• /
• 2013

Objective: The majority of embryo transfers (ETs) to date have been performed on day 3 to reduce the potential risk of developmental arrest of in vitro cultured embryos before ET. Development of sequential media has significantly improved culture conditions and allowed blastocyst transfer on day 5. While day 5 ET provides higher clinical pregnancy outcomes with reduced risks of multiple pregnancies, it still has potential risks of developmental arrest of IVF embryos. The aim of this study was to evaluate the clinical outcomes of day 4 ETs and compare the efficacy of day 4 ET with day 5 ET. Methods: From 2006 to 2009, a total of 747 fresh IVF-ET cycles were retrospectively analyzed (day 4, n=440 or and day 5, n=307). The cycles with any genetic factors were excluded. The rates of matured oocytes, fertilization, good embryos, and clinical pregnancy of the two groups were compared. The chi-square test and t-test were used for statistical analysis. Results: There were no significant differences between the two groups with respect to the mean age of the females and rates of matured oocytes. The pregnancy outcomes of day 4 ET (40.7%) were similar to those of day 5 ET (44.6%). The implantation rate of day 5 ET (24.2%) was significantly higher than that of day 4 ET (18.4%) (p=0.003). Conclusion: Day 4 ET can be chosen to avoid ET cancellation in day 5 ET resulting from suboptimal circumstances in the IVF laboratory, but the decremented quality of embryos for transfer and the decreased pregnancy rate must be taken into consideration.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.31 no.4
• /
• pp.31-41
• /
• 2018

Objectives : The purpose of this study is to establish the basis of the assessment tools that can be used for the diagnosis and assessment of skin diseases by reviewing the present status of the assessment tools used in domestic and overseas traditional medicine papers for the past five years. Methods : This study is based on analysis of papers on clinical trials about atopic dermatitis, psoriasis, acne, urticaria published from 1st July 2013 to 30th June 2018. The papers were searched from Oriental Medicine Advanced Searching Integrated System(OASIS), Korean Traditional Knowledge Portal(KTKP), Pubmed, MEDLINE. Results : 40 articles on atopic dermatitis, 34 articles on psoriasis, 26 articles on acne and 10 articles on urticaria were selected. Among them, 38 articles(90%), 20 articles(85%), 22 articles(85%) and 5 articles(50%) used assessment tools in order. Conclusions : SCoring Atopic Dermatitis(SCORAD), objective SCORing of Atopic Dermatitis index(OSI), Eczema Area and Severity Index(EASI) were used in studies on atopic dermatitis. In the case of psoriasis, The Psoriasis Area and Severity Index(PASI) was used in most papers. In the study on acne, most of Korean papers used Korean Acne Grading System(KAGS), but in the overseas papers, various assessment tools were used. In the case of urticaria, the rate of use of the assessment tool was the lowest, but the assessment tool used was unified by Urticaria Activity Score(UAS). Since skin diseases can cause stress and a decrease in quality of life, the quality of life should be taken into account when evaluating treatment effects.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.2
• /
• pp.165-172
• /
• 2000

Objective: In vitro fertilization (IVF) and a prolonging the time of culture may be helpful in establishing a viable pregnancy through a selection effect. Some embryos do not develop beyond the 4-cell stage and some may not develop to the blastocyst stage. We have evaluated the safety of SET and the outcomes of pregnancy. Methods: Sperms were treated with Ham's F-10 supplemented with 10% human follicular fluid (hFF). oocytes or fertilized oocytes were cultured in Dulbecco's Modified Eagle Medium (DMEM) with 10% or 20% hFF respectively. Up to five oocytes were inseminated with approximately 200,000 sperm cells/2 ml in each well. Fertilization was examined in the following morning and fertilized oocytes were co-cultured until embryo transfer. Vero cells for co-culture were prepared in Tissue Culture Medium - 199 (TCM-199) with 10% fetal bovine serum. At the two to four cell and blastocyst on day 2 and day 5, embryo and blstocyst grading were evaluated. Pregnancy rate was determined after transfer of human embryos at the two to four cell stage on day 2 (Group I) or subsequent transfer of embryos on day 2 and at the blastocyst stage on day 5 (Group II). For statistical analysis, Student's t-test and Chi-square (${\chi}^2$_test) were used. Results were considered statistically significant when p value was less than 0.05. Results: No differences was found in the fertilization between Group I (81.0%, 98/121) and Group II (81.8%, 180/220). In case of cleavage rate, no difference was found in Group I (95.9%, 94/98) and Group II (97.8%, 174/178). However, the rate of-clinical pregnancy was significantly higher (p=0.014) in Group II (66.7%, 12/18) than in Group I (26.3%, 5/19). Conclusion: The results of this study showed that SET is safe and effective, and significantly increases the pregnancy rate.

• Investigative Magnetic Resonance Imaging
• /
• v.20 no.2
• /
• pp.81-87
• /
• 2016

Purpose: To analyze the feasibility of three-dimensional (3D) diffusion-weighted (DW) PSIF (reversed FISP [fast imaging with steady-state free precession]) sequence in order to evaluate peripheral nerves in the elbow. Materials and Methods: Ten normal, asymptomatic volunteers were enrolled (6 men, 4 women, mean age 27.9 years). The following sequences of magnetic resonance images (MRI) of the elbow were obtained using a 3.0-T machine: 3D DW PSIF, 3D T2 SPACE (sampling perfection with application optimized contrasts using different flip angle evolution) with SPAIR (spectral adiabatic inversion recovery) and 2D T2 TSE (turbo spin echo) with modified Dixon (m-Dixon) sequence. Two observers used a 5-point grading system to analyze the image quality of the ulnar, median, and radial nerves. The signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) of each nerve were measured. We compared 3D DW PSIF images with other sequences using the Wilcoxon-signed rank test and Friedman test. Inter-observer agreement was measured using intraclass correlation coefficient (ICC) analysis. Results: The mean 5-point scores of radial, median, and ulnar nerves in 3D DW PSIF (3.9/4.2/4.5, respectively) were higher than those in 3D T2 SPACE SPAIR (1.9/2.8/2.8) and 2D T2 TSE m-Dixon (1.7/2.8/2.9) sequences (P < 0.05). The mean SNR in 3D DW PSIF was lower than 3D T2 SPACE SPAIR, but there was no difference between 3D DW PSIF and 2D T2 TSE m-Dixon in all of the three nerves. The mean CNR in 3D DW PSIF was lower than 3D T2 SPACE SPAIR and 2D T2 TSE m-Dixon in the median and ulnar nerves, but no difference among the three sequences in the radial nerve. Conclusion: The three-dimensional DW PSIF sequence may be feasible to evaluate the peripheral nerves around the elbow in MR imaging. However, further optimization of the image quality (SNR, CNR) is required.

• Journal of Gifted/Talented Education
• /
• v.26 no.4
• /
• pp.677-697
• /
• 2016

This study analyzed the difference in evaluation results in evaluating identical products by applying two different types of evaluating scales, Creative Product Analysis Matrix (CPAM) and Creative Product Semantic Scale (CPSS) by O'Quin and Bessember (1989). As a result, evaluation based on explicit knowledge scored lower than evaluation based on implicit knowledge, implying that the evaluation becomes stricter. When evaluated with CPSS, which as relatively more segmentalized grading criteria, all sub-dimensions of creativity showed low scores, and it show that when evaluator's first impression or personal evaluation standard on the products is firm, they may not be evaluated by the evaluation tools. Gifted education teachers were giving similar evaluations as experts in creative product evaluation, and understanding the product evaluation tool fully in advance before teaching or evaluating products may lead to the generation of newer, more useful and appropriate, and highly creative product with high solvability.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.23-33
• /
• 2017

Due to the rapid development of cities, densities and heights of urban structures are increased, and much larger and more underground spaces are being developed accordingly. Increasing development of underground spaces has induced more ground sinks and underground cavities. Therefore, safety of people is threatened by potential ground collapses and possible accidents, which may result from underground cavity. To actively respond against potential danger of ground sink, evaluation of existing cavity grade and development of recovery procedure are important. There exists the ground sinking management grade system of expressway developed as local standards in Japan. Recently, ground sinking management grade system of Seoul was developed with consideration of road and asphalt conditions. In this study, 209 underground cavities of ${\bigcirc}{\bigcirc}$ area were explored and their cavity shapes and grades were evaluated based on both ground sinking management grade systems of Japan and Seoul. Comparison is made between cavity grades evaluated based on both grading systems from Japan and Seoul. As a result of comparative analysis, the conservatively-estimated cavity grades requiring emergency restoration based on the Japanese management grade system of expressway result from neglection of layer thickness of surface pavement, considering only width and cover depth of a cavity.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.109-114
• /
• 2011

The objective of this study was to investigate the effects of environments (farms born, testing groups, age at the tests, date at slaughter, ages at slaughter) on body weights at 6, 12, 18 and 24 months of ages, body type measurements at 18 months of age and carcass characteristics in Hanwoo steer populations that were collected from commercial farms and reared in a progeny testing station. Performances of a total of 1,838 steer calves set for tests from 2004 to 2008 were recorded. Carcass characteristics were the carcass grading results evaluated and data collected slaughter scores at 24 months of age. For growth traits of all age classes and body type traits measured at 18 months of age, farms born, test group and linear covariate of age at test were fit in the models. For carcass traits, date at slaughter and linear covariate of ages at slaughter were fit in the models. Effect of farm at birth was not significant for body weight at 24 months of age. Carcass weight, eye muscle area, yield score and back fat thickness were affected by dates at slaughter but not by the ages at slaughter. Marbling score, however, was affected by these two effects. Farms at birth did not seem to affect body type measures greatly. This study will be utilized for Hanwoo Steers genetic evaluation.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.229-238
• /
• 2019

Various wood defects occur during tree growing or wood processing. Thus, to use wood practically, it is necessary to objectively assess their quality based on the usage requirement by accurately classifying their defects. However, manual visual grading and species classification may result in differences due to subjective decisions; therefore, computer-vision-based image analysis is required for the objective evaluation of wood quality and the speeding up of wood production. In this study, the SIFT+k-NN and CNN models were used to implement a model that automatically classifies knots and analyze its accuracy. Toward this end, a total of 1,172 knot images in various shapes from five domestic conifers were used for learning and validation. For the SIFT+k-NN model, SIFT technology was used to extract properties from the knot images and k-NN was used for the classification, resulting in the classification with an accuracy of up to 60.53% when k-index was 17. The CNN model comprised 8 convolution layers and 3 hidden layers, and its maximum accuracy was 88.09% after 1205 epoch, which was higher than that of the SIFT+k-NN model. Moreover, if there is a large difference in the number of images by knot types, the SIFT+k-NN tended to show a learning biased toward the knot type with a higher number of images, whereas the CNN model did not show a drastic bias regardless of the difference in the number of images. Therefore, the CNN model showed better performance in knot classification. It is determined that the wood knot classification by the CNN model will show a sufficient accuracy in its practical applicability.