• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.5
• /
• pp.1145-1158
• /
• 1994

A three-dimensional, finite difference, numerical model with free surface was developed on ${\sigma}$-coordinate. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The scheme is essentially independent of the stringent stability criteria (CFL condition) for explicit schemes of external surface gravity wave. Implicit algorithm was applied for vertical shear stress, Coriolis force and pressure gradient terms. The reliability of the model with vertically variable grid system was checked by the comparison of simulation results with analytic solution of wind-driven currents in a one-dimensional channel. Sensitivity analysis of differencing parameters was carried out by applying the model to the calculation of wind-driven currents in a square lake.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.146-149
• /
• 2002

The aim of stereotactic radiosurgery(SRS) is to deliver a high dose to a target region and a low dose to critical organ through only one or a few irradiation. To satisfy this aim, optimized irradiating conditions must be searched in the planning. Thus, many mathematical methods such as gradient method, simulated annealing and genetic algorithm had been proposed to find out the conditions automatically. There were some limitations using these methods: the long calculation time, and the difficulty of unique solution due to the different shape of tumor. In this study, optimization protocol using ideal models and data base was proposed. Proposed optimization protocol constitutes two steps. First step was a preliminary work. Some possible ideal geometry shapes, such as sphere, cylinder, cone shape or the combination, were assumed to approximate the real tumor shapes. Optimum variables such as isocenter position or collimator size, were determined so that the high dose region could be shaped to fit ideal models with the arrangement of multiple isocenter. Data base were formed with those results. Second, any shaped real targets were approximated to these models using geometry comparison. Then, optimum variables for ideal geometry were chosen from the data base predetermined, and final parameters were obtained by adjusting these data. Although the results of applying the data base to patients were not superior to the result of optimization in each case, it can be acceptable as a starting point of plan.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.147-152
• /
• 1995

실험에 의한 모우드 해석 방법들은 1980년대부터 활발히 연구되어 많은 새로운 방법들이 개발되어 발표되었다. 그러나 개발된 대부분의 방법들은 측정된 데이타를 일괄처리하는 밸치(또는 off-line) 방법들이다. 최근에는 시간에 따라서 변하는 구조물의 동특성을 규명하는 분야에 모우드 해석 방법이 응용되어 사용되고 있다. 이러한 응용분야에서는 모우드 변수들의 변화되는 값을 새로운 데이타가 샘플링 될 때마다 그 값들을 수정하면서 추정할 수 있는 회귀적인(recursive 또는 on-line) 방법을 사용하여야 한다. Davies와 Hammond[1]는 회귀적 선형 자승법(Recursive Least Squares : RLS)을 이용하여 모우드 변수를 구하고 이를 벧치방법인 Instrumental Variable 방법과 Fourier 방법의 결과와 비교하였다. 그러나, 그 결과에서 보여준것처럼 RLS 방법은 잡음 대 시호비가 낮을 때에만 모우드 변수 값들을 정확하게 추정할 수 있었다. Sundararajan과 Montgomrey[2]는 회귀적 선형 최소자승 격자필터(lattice filter)를 이용하여 구조물의 차수(order)와 고유진동형, 그리고 진폭을 결정한 후 이를 토대로 회귀적 gradient형태의 방정식 오차 규명 방법(equation-error identification algorithm)에 의하여 모우드 변수들을 추정하였다. 이 방법은 2차원 격자구조물의 모우드 변수 추정에 사용되었으며, 또한 적응모우드제어에도 성공적으로 이용되었다. 그러나, 이 방법도 잡음 대 신호비가 낮은 환경에서만 사용할 수 있다는 단점이 있다. 위에서 언급한 방법들은 모두 RLS 방법을 기초로 하여 개발되었으나, RLS 방법은 전형적인 결정적(deterministic)방법으로서 잡음이 섞인 데이타를 처리하기에는 부적절한 방법임이 널리 알려진 사실이다[3]. 최근에 Ben Mrad와 Fassois[4]는 신호에 잡음이 존재하여도 이를 잘 처리할 수 있는 확률적(stochastic) 방법을 개발하여 기존의 결정적 방법들과 그 결과를 비교하였다. 그러나, 개발된 방법은 응답 신호에 백색잡음(white noise)이 섞이는 특수한 경우에만 사용할 수 있게 만들어져서 이 방법의 실질적인 적용에는 어려움이 있다. 본 연구에서는 기존의 방법들의 단점을 극복할 수 있는 새로운 회귀적 모우드 변수 규명 방법을 개발하였다. 이는 Fassois와 Lee가 ARMAX모델의 계수를 효율적으로 추정하기 위하여 개발한 뱉치방법인 Suboptimum Maximum Likelihood 방법[5]를 기초로 하여 개발하였다. 개발된 방법의 장점은 응답 신호에 유색잡음이 존재하여도 모우드 변수들을 항상 정확하게 구할 수 있으며, 또한 알고리즘의 안정성이 보장된 것이다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.77-85
• /
• 2010

Fingerprint image quality checking is one of the most important issues in on-line fingerprint recognition because the recognition performance is largely affected by the quality of fingerprint images. In the past, many related fingerprint quality checking methods have typically considered the local quality of fingerprint. However, It is necessary to estimate the global quality of fingerprint to judge whether the fingerprint can be used or not in on-line recognition systems. Therefore, in this paper, we propose both local and global-based methods to calculate the fingerprint quality. Local fingerprint quality checking algorithm considers both the condition of the input fingerprints and orientation estimation errors. The 2D gradients of the fingerprint images were first separated into two sets of 1D gradients. Then，the shapes of the PDFs(Probability Density Functions) of these gradients were measured in order to determine fingerprint quality. And global fingerprint quality checking method uses neural network to estimate the global fingerprint quality based on local quality values. We also analyze the matching performance using FVC2002 database. Experimental results showed that proposed quality check method has better matching performance than NFIQ(NIST Fingerprint Image Quality) method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.794-801
• /
• 2017

In this paper, we proposed airborne target recognition using multi-channel combining method in DTV-based passive radar. By combining multi-channel signals, we obtained the HRRP with sufficient range resolution. HRRP was obtained by AR method or zero-padding. From the obtained HRRP, we extracted scattering centers by CLEAN algorithm using the gradient descent. We extracted feature vectors and performed target recognition after training neural network using the extracted feature vectors. To verify performance of proposed methods, we assumed frequency bands of three broadcasting transmitters operated in Korea(Mt. Gwan-ak, Mt. Yong-moon, Kyeon-wol-ak) and used full scale 3D CAD model of four targets. Also we compared the target recognition performance of the proposed method with that of using only single-channel of three broadcasting transmitters. As a result, proposed methods showed better performance than using only single-channel at three broadcasting transmitters.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.98-109
• /
• 2016

The flow and heat transfer characteristics of a heat exchanger having rectangular pin-fin in the flow direction have been investigated numerically. On the bottom plate, the convective boundary conditions for the hot side was given, and the fins were arranged in a channel-type geometric model using the periodic boundary condition in the span-wise direction. Three-dimensional numerical calculations for the flow and conjugate heat transfer problem were conducted using SIMPLE algorithm and $k-{\varepsilon}$ turbulence model. For the slanted pin-fin models, it was found that the downward cooling flow is generated due to the downward pressure gradient component, which can enhance the heat transfer performance near the bottom surface and the fin stem region. Four different inclined angles were considered in the Reynolds number range of 13,500-55,000. The aero-thermal performance of the slanted pin-fin heat exchangers, such as the volume and area goodness factors, were summarized and compared with the baseline plate-fin type heat exchanger quantitatively.

• Journal of Korea Multimedia Society
• /
• v.8 no.2
• /
• pp.164-173
• /
• 2005

Painterly rendering may bring various results through the parameters that determine the characteristics of brush strokes such as, color, orientation, size, and shape. In this paper, we propose the most adaptive brush stroke generation for source images, using reference data. Our algorithm used Colors formed by actual palette colors from artists. To create the palette, we have referred mostly to colors used in Van Gogh's works and determined the color of brush strokes by transferring it to the most similar one, through comparing colors used in source images and the palette colors. Also, In order to emulate a brush stroke with dynamic properties like Van Gogh styles we have applied a brush stroke orientation that surrounds the edges by referring to the edge orientation of source images. The sizes were determined depending on the different sizes of the objects from wide to narrow brushes. Finally, we applied spline curve shapes to simulate curves and swirls like Van Gogh styles. The brush strokes created in such method, were applied separately according to its segmented images, and composed after rendering.

• Journal of Korea Multimedia Society
• /
• v.3 no.4
• /
• pp.356-364
• /
• 2000

Block based fast motion estimation algorithm use the fixed search pattern to reduce the search point, and are based on the assumption that the error in the mean absolute error space monotonically decreases to the global minimum. Therefore, in case of many local minima in a search region we are likely to find local minima instead of the global minimum and highly rely on the initial search points. This situation is evident in the motion boundary. In this paper we define the candidate regions within the search region using the motion information of the neighbor blocks and we propose the multiple local search method (MLSM) which search for the solution throughout the candidate regions to reduce the possibilities of isolation to the local minima. In the MLSM we mark the candidate region in the search point map and we avoid to search the candidate regions already visited to reduce the calculation. In the simulation results the proposed method shows more excellent results than that of other gradient based method especially in the search of motion boundary. Especially, in PSNR the proposed method obtains similar estimate accuracy with the significant reduction of search points to that of full search.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2016

Conventional RF energy harvesting systems can harvest energy and decode information from same source as an Hybirid-AP (H-AP). However, harvesting efficiency is seriously dependent on distance between users and H-AP. Therefore, in this paper, we proposed a transmission model for RF harvesting consisting of information and power source separately called Decoupled RF Energy harvesting networks. Main purpose of this paper is to maximize energy efficiency under various constraints of transmit power from H-AP and power beacon (PB), minimum quality of service and quality of harvested power of each users. To measure proposed model's performance, we proposed optimal time scheduling algorithms for energy efficiency (EE) maximization using Lagrangian dual decomposition theory that locally maximizes the EE by obtaining suboptimal values of three arguments : transmit power of H-AP, transmit power of PB, frame splitting factor. Experiment results show that the proposed energy-efficient algorithms converge within a few iterations with its optimality and greatly improve the EE compared to that of baseline schemes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.505-513
• /
• 2010

The tribrachial flame has attracted interest as a basic structure of the flame edge. This flame structure helps understand stabilization of laminar flames and re-ignition of turbulent flames. A number of analytical and experimental studies have been carried out on the tribrachial flame. However, the effect of the variation of the flammability limits on the structure of the tribrachial flame has not been studied in detail. In this study, the effect of non-symmetric flammability limits on the flame structure was investigated by adopting a simple numerical scheme based on several laminar flame theories. A fixed velocity field was considered and boundary matching algorithm was used on the premixed branch. The variation of the diffusion branches under the non-symmetric flammability limits and heat loss was investigated. The formation and extinction of the diffusion branch behind the premixed branch were successfully described. This basic study can help understand the fundamental structure of the flame and can form the basis of subsequent detailed studies.