• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.233-244
• /
• 2012

Goseong bay, located in southeast sea of Korea with an area of 2,100 ha, is a semi-enclosed bay well-known for oyster farming cultured in an extended range of 148 ha. The objective of this study is to provide the fundamental data in order to manage the effective sea area. A total 26 of surface sediment were collected from Goseong bay to evaluate their sedimentary environment and heavy metals. The loss on Ignition (LOI), C/N ratio, acid volatile sulfide (AVS) and heavy metals were analyzed. loss on ignition (LOI) of surface sediment range from 1.00% to 3.03% (average 2.00%). The carbonate content ranges from 0.52% to 4.29% (average 2.37%). C/N ratio of organic matter showed that most part of organic matter comes from neighboring continent. Acid volatile sulfide (AVS) value of surface sediment from 0.02 mg/g to 1.43 mg/g (average 0.24 mg/g). A ten element of surface sediments (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, V, Zn) were calculated by enrichment factor (Ef) and the results show that some areas are highly polluted with respect Cu and Hg. The correlation matrix displays the existence of remarkable levels of correlation with both positive and negative values among different variable pairs. LOI and AVS showed both positive values. LOI and AVS values falls under 2% and 1%. Therefore, Goseong bay showed good in quality of sediment.

• Journal of Forest and Environmental Science
• /
• v.17 no.1
• /
• pp.1-17
• /
• 2001

Forming a part of "Cooperative Practical Study for the Modernization of the Management of National Forest", this study was conducted to provide overall ecological information for the natural regeneration of major tree species on the basis of community structural attributes in the deciduous forest ecosystem. Followings are summarized characteristics of the natural regeneration for the selected tree species. Betula costata : Although large number of seeds are dispersed by wind, they require mineral soils to germinate. Thick litter layer could be an obstacle to germinate. After germination, the seedling requires large amount of light for successful establishment. Acer mono : Characterized by high shade tolerance and weak drought resistance, the seedling should be overcasted with more than 50% of canopy coverage. High stand density should be maintained to produce good quality of timber. The potential of coppice may be high. Ulmus laciniata : Since this species needs high rate of troll moisture and light, around 60% of canopy coverage should be maintained to retain moisture and incoming light. The competition with other vegetation should be removed for the favor of successful seedling establishment. Fraxinus mandshurica : This species requires moist mineral soils to germinate. After germination, the seedling needs large amount of light and moisture for successful establishment. Site preparation should be applied to reduce competition with weedy vegetation. Fraxinus rhynchophylla : Interval of large seed crops may be highly varied. Thick litter layer could be an obstacle to germinate. Site preparation should be applied to reduce competition with weedy vegetation so as to achieve successful seedling establishment. Quercus mongolica : Including the difficulty of seed supply by the consumption, thick litter layer and mountain bamboo cover could be the obstacle to germinate. More than 50% of relative light intensity is necessary to achieve successful seedling establishment. Kalopanax pictus : Thick litter layer could be an obstacle to germinate. The seedling needs large amount of light and moisture for successful establishment. Abies holophylla : In spite of high shade tolerance, the growth rate in sapling stage may be extremely slow. Cornus controversa : Seeds (drups) are consumed and dispersed by animals, tending to be not sufficient in seed supply. This species requires large amount of light for successful germination and seedling establishment. Tilia amurensis : The difficulty of seed supply might be expected with low seed purity and double dormancy. Since thick litter layer could be an obstacle to germinate, the species requires moist mineral soils for successful germination. The potential of coppice may be extremely high.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.89-97
• /
• 2007

A three-dimensional (3D) magnetotelluric (MT) survey has been carried out to delineate subsurface structures and possible fractures, for development of low-temperature geothermal resources in Pohang, Korea. Quite good quality MT data could be obtained throughout the survey region by locating the remote reference in Kyushu, Japan, which is ${\sim}480\;km$ from the centre of the field site. 3D modelling and inversion are performed taking into account the sea effect in MT measurements near the seashore. The nearby sea in the Pohang area affects MT data at frequencies below $1\;Hz{\sim}0.2\;Hz$, depending on the distance from the seashore. The most severe sea effects were observed in the south-east parts of the survey area, closer to Youngil Bay. 3D inversion with and without the seawater constraint showed very similar results at shallow depths, roughly down to 2 km. At greater depths, however, a strong sea effect seems to form a fictitious conductive structure in ordinary 3D inversion, especially in the south-eastern part of the survey region. Comparison between drilling results and the resistivity profiles from inversions showed that five layered structures can be distinguished the subsurface beneath the target area. They are: (a) semi-consolidated mudstones with resistivity less than $10\;{\Omega}m$, which are ${\sim}300\;m$ thick in the northern part and ${\sim}600\;m$ thick in the southern part of the survey area; (b) occasional occurrence of trachybasalt and lapilli tuff within the mudstone layer has resistivity of a few tens of${\Omega}m$, (c) intrusive rhyolite ${\sim}400\;m$ thick has resistivity of several hundreds of ${\Omega}m$, (d) alternating sandstone and mudstone down to 1.5 km depth shows resistivity of ${\sim}100\;{\Omega}m$, (e) a conductive structure was found at a depth of ${\sim}3\;km$, but more geological and geophysical study should be carried out to identify this structure.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.179-200
• /
• 1996

The intrinsic instabilities of fluid flow occurred in the melt of the Czochralski crystal growth system Czochralski method, asymmetric flow patterns and temperature profiles in the melt have been studied by many researchers. The idea that the non-symmetric structure of the growing equipment is responsible for the asymmetric profiles is usually accepted at the first time. However further researches revealed that some intrinsic instabilities not related to the non-symmetric equipment structure in the melt could also appear. Ristorcelli had pointed out that there are many possible causes of instabilities in the melt. The instabilities appears because of the coupling effects of fluid flow and temperature profiles in the melt. Among the instabilities, the B nard type instabilities with no or low crucible rotation rates are analyzed by the visualizing experiments using X-ray radiography and the 3-D numerical simulation in this study. The velocity profiles in the Silicon melt at different crucible rotation rates were measured using X-ray radiography method using tungsten tracers in the melt. The results showed that there exits two types of fluid flow mode. One is axisymmetric flow, the other is asymmetric flow. In the axisymmetric flow, the trajectory of the tracers show torus pattern. However, more exact measurement of the axisymmetrc case shows that this flow field has small non-axisymmetric components of the velocity. When fluid flow is asymmetric, the tracers show random motion from the fixed view point. On the other hand, when the observer rotates to the same velocity of the crucible, the trajectory of the tracer show a rotating motion, the center of the motion is not same the center of the melt. The temperature of a point in the melt were measured using thermocouples with different rotating rates. Measured temperatures oscillated. Such kind of oscillations are also measured by the other researchers. The behavior of temperature oscillations were quite different between at low rotations and at high rotations. Above experimental results means that the fluid flow and temperature profiles in the melt is not symmetric, and then the mode of the asymmetric is changed when rotation rates are changed. To compare with these experimental results, the fluid flow and temperature profiles at no rotation and 8 rpm of crucible rotation rates on the same size of crucible is calculated using a 3-dimensional numerical simulation. A finite different method is adopted for this simulation. 50×30×30 grids are used. The numerical simulation also showed that the velocity and flow profiles are changed when rotation rates change. Futhermore, the flow patterns and temperature profiles of both cases are not axisymmetric even though axisymmetric boundary conditions are used. Several cells appear at no rotation. The cells are formed by the unstable vertical temperature profiles (upper region is colder than lower part) beneath the free surface of the melt. When the temperature profile is combined with density difference (Rayleigh-B nard instability) or surface tension difference (Marangoni-B nard instability) on temperature, cell structures are naturally formed. Both sources of instabilities are coupled to the cell structures in the melt of the Czochralski process. With high rotation rates, the shape of the fluid field is changed to another type of asymmetric profile. Because of the velocity profile, isothermal lines on the plane vertical to the centerline change to elliptic. When the velocity profiles are plotted at the rotating view point, two vortices appear at the both sides of centerline. These vortices seem to be the main reason of the tracer behavior shown in the asymmetric velocity experiment. This profile is quite similar to the profiles created by the baroclinic instability on the rotating annulus. The temperature profiles obtained from the numerical calculations and Fourier transforms of it are quite similar to the results of the experiment. bove esults intend that at least two types of intrinsic instabilities can occur in the melt of Czochralski growing systems. Because the instabilities cause temperature fluctuations in the melt and near the crystal-melt interface, some defects may be generated by them. When the crucible size becomes large, the intensity of the instabilities should increase. Therefore, to produce large single crystals with good quality, the behavior of the intrinsic instabilities in the melt as well as the effects of the instabilities on the defects in the ingot should be studied. As one of the cause of the defects in the large diameter Silicon single crystal grown by the

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.122-126
• /
• 2003

In this study, $Zn_{0.86}Mn_{0.14}$Te epilayer of 0.7 $\mu\textrm{m}$-thickness was grown on GaAs(100) substrate by using hot wallepitaxy. GaAs(100) substrate was removed from $Zn_{0.86}Mn_{0.14}$Teepilayer by the selective etching solution. The crystal structure and the lattice constant of only Z $n_{0.86}$ M $n_{0.14}$Te epilayer were investigated to be zincblende and 6.140 $\AA$ from X-ray diffraction pattern, respectively. Mn composition x of $Zn_{1-x}Mn_x$Te epilayer was found to be 0.14 using this lattice constant and Vegard's law. The crystal quality of the epilayer was confirmed to be very good due to 256 arcsec-full-width at half-maximum of the double crystal rocking curve. The absorption spectra from the transmission ones were obtained to measure the band gap energy of $Zn_{0.86}Mn_{0.14}$Te epilayer from 300 K to 10 K. With the decreasing temperature,. strong absorption regions in the absorption spectra were shifted to higher energy side and the absorption peak meaning the free exciton formation appeared near the absorption edge. The band gap energy values of $Zn_{0.86}Mn_{0.14}$Te epilayer at 0 K and 300 K were found to be almost 2.4947 eV and 2.330 eV from the temperature dependence of the free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer, respectively. The free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer without GaAs substrate was larger 15.4 meV than photoluminescence peak position energy at 10 K. This energy difference between two peaks was analysed to be Stokes shift.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.1-25
• /
• 2004

This study analyzes the external forms of the household textbooks and also the contents of them used at girls' middleㆍhigh schools during the period of Japanese ruling over Korea. To this end, 8 household textbooks published from 1928 to 1937 were analyzed. The results of the study are summarized as follows. 1. The household subject had become the one of the most important subjects to girl students as the practical uses were emphasized in educational area during the period. As a result. the classes of the household were the second in hours, following the class of Japanese (the national language) to girl students. 2. The contents of the household textbooks were intended to contain 'the modern' and 'the newest'. The students were also suggested to apply the contents of the textbooks to real home life. Many pictures, photos and illustrations were included in household textbooks to help students to understand the contents of the subject. 3. The purposes of the household class were the reformation of the living conditions and home economics. 4. The external characteristics of the household textbooks during the period were as follows. - Written in Japanese vertically and the size of the textbook was A5 (150/210) with pulp paper of good quality - The type style of the body of the textbooks was Ming-style type- The sequent order of the textbooks was the outer cover, the title page, pictorial, introduction, table of contents, the body, appendix and the back cover. 5. The household textbooks consisted of the first volume and the second volume. The first volume contained clothing and textiles, food and nutrition and housing. Taking care of the aged. nursing. child care, household economy and home management were included in the second volume. 6. The household textbooks were designed to make women the housewives.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.139-144
• /
• 2009

Recently, the mathematical analysis of stent simulation has been improved, with the help of development of various tool which measure mechanical property and location of stent in artery. The most crucial part of the stent modeling is how to design ideal stent and to evaluate the interaction between stent and artery. While there has been great deal of researches on the evaluation of the expansion, stress distribution, deformation of the stent in terms of the various parameters, few verification through computer simulation has been performed about deformation and stress distribution of the stent. In this study, we have produced the corresponding results between experimental test using Universal Testing Machine and computer simulation for the ideal model of stent. Also, we have analyzed and compared stress distribution of stent in the cases of that with membrane and that without membrane. The results of this study would provide minimum change of plan and good quality for ideal stent replacing damaged artery through the analysis using computer simulation in the early stage of stent design.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.20-30
• /
• 1975

It is matter of fact processing technology must affects the quality and yield of final product and these also depend on the selection of raw material directly or indirectly. So that the estimation of tile preprocessing condition of shellfish is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of baby clam, which is one of the five important shellfishes for domestic use and export. The important results are as follows: 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful for measuring the condition index of baby clams. 2. Baby clams grown in the beds with the composition of a large quantity of gravel were low in condition index value than in sand and mud. 3. If the green feed phenomenon was the prime consideration for canned baby clams, tile most suitable harvest season if October. In this period, the digestive tract in body was almost colorless. 4. As a whole, seasonal changes of moisture and fat content in baby clams were reversely correlated. Protein content increased from April and slightly decreased for a while from July to August and increased again from September. In March, the content of glycogen was 6.3 to 6.8 percent. From this period to October, glycogen was rapidly decreased. In October, it was only 0.1 to 0.2 percent but increased from November. There were little seasonal changes in pH value and crude ash content. The pH value of meat was 6.0 to 6.2 and crude ash content was about 2 percent. 5. By the results of condition index and chemical composition of baby clams, the suitable harvest season as raw materials for processing was from March to June and from September to October. 6. The steamed baby clam meat was packed with 2 percent salt solution containing 0.15 percent, citric acid or 0.5 percent $Na_2$ EDTA in a round sanitary tin can coated with C-enamel that is 203.9 ml by volume and sterilized for 60 minutes at $112^{\circ}C$. The canned product has shown a good result to reserve the natural characteristics of baby clam through six month storage at room temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.283-290
• /
• 1982

Sardine and mackerel so called dark muscled fish have been underutilized due to the disadvantages in bloody meat color, high content of fat, and postmortem instability of protein. Recent efforts were made to overcome these defects and develope new types of product such as texturized protein concentrates and dark muscle eliminated minced fish. Approach of this study is based on the rapid dehydration of foamed fish-starch paste by dielectric heating. In process comminuted sardine meat was washed more than three times by soaking and decanting in chilled water and finally centrifuged. The meat was ground in a stone mortar added Ivith adequate amounts of salt, foaming agent, and other ingredients for aid to elasticity and foam stability. The ground meat paste was extruded in finger shape and heated in a microwave oven to give foamed, expanded, and porous solid structure by dehydration. Dielectric onstant $(\varepsilon')$ and dielect.ic loss $(\varepsilon")$ values of sardine meat paste were influenced by wavelength and moisture level. Those values at 100 KHz and 15 MHz were ranged 2.25-9.86; 2.22-4,18 for E' and 0.24-19.24; 0.16-1.20 for E", respectively, at the moisture levels of $4.2-13.8\%$. For a formula for fish-starch paste preparation, addition of $20-30\%$ starch (potato starch) to the weight of fish meat, $2-4\%$ salt, and $5-10\%$ soybean protein was adequate to yield 4-5 folds of expansion in volume when heated. Addition of e99 yolk was of benefit to micronize foam size and better crispness. In order to provide better foaming and dehydration, addition of $0.2-0.5\%$sodium bicarbonate, foaming agent, was proper to result in foam size of 0.5-0.7 mm and foam density of $200-400\;/cm^2$ which gave a good crispness. Heating time was depended upon the moisture level of fish-starch paste. For a finger shaped paste (1.0cm. $D\times10cm.L$) heating for 150-200 sec. in a microwave oven (700W. 2.45GHz) was sufficient to generate foams, expand, and solidify the porous structure of fish-starch paste. When the moisture content was above $55\%$ browning and scorching was deepened due to over-expansion and over-heating whereas the crispness was hardened by insufficient expansion at lower moisture content. In quality evaluation of the product, chemical composition of $30\%$ starch and $3\%$ salt added product was moisture $8.8\%$, lipid $2.4\%$, carbohydrate $46.7\%$, protein $36.1\%$, and ash $6.0\%$. Eleven membered panel test evaluated that fish-starch paste was acceptable in color, crisp-ness, taste, except a trace of fishy odour which could be masked by the addition of spice extracts.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.122-140
• /
• 2001

The aims of this study were to understand and to predict the determinent factors affecting the exercise behaviors and physical fitness by testing the Pender's revised health promotion model, and to help the patients with rheumatoid arthritis and osteoarthritis perform the continous exercise program, and to help them maximize the physical effect such as muscle strength, endurance, and functional status and mental effects including self efficacy and quality of life, and improve the physical and mental well being, and to provide a basis for the nursing intervention strategies. Of the selected variables in this study, the endogenous variables included the physical fitness, exercise score, exercise participation, perceived benefits of action, perceived barriers of action to exercise, activity-related affect(depression) and perceived self-efficacy, interpersonal influences(family support), situational factors(duration of arthritis, fatigue) and the exogenous variables included personal sociocultural factor(education level), personal biologic factor(body mass index), personal psychologic factor(perceived health status) and prior related behavior factors(previous participation in exercise, life-style). We analyzed the clinical records of 208 patients with rheumatoid arthritis and degenerative arthritis who visited the outpatient clinics at H university hospital in Seoul. Data were composed of self reported qustionnaire and good of fitness score which were obtained by padalling the ergometer of bicycle for 9 minutes. SPSS Win 8.0 and Window LISREL 8.12a were used for statistical analysis. Of 75 hypothetical paths that influence on physical fitness, exercise participation, exercise score, perceived benefits of action, perceived barriers of action to exercise, activity-related affect(depression) and perceived self-efficacy, interpersonal influences(family support), situational factors(duration of arthritis, fatigue), 40 were supported. The physical fitness was directly influenced by life-style, perceived health status, education level, family support, fatigue, which explained 12% of physical fitness. The exercise participation were directly influenced by life-style, education level, past exercise behavior, perceived benefits of action, perceived barriers of action, depression and duration of arthritis, which explained 47% of exercise participation. Exercise score were directly affected by perceived self efficacy. BMI, life-style, past exercise behavior, perceived benefits of action, family support, perceived health status. perceived barriers of action, and fatigue, which explained 70%. Perceived benefits of action was directly influenced by BMI, life-style, which explained 39%. Perceived barriers of action were directly influeced by past exercise behavior, perceived health status, which explained 7%. Perceived self efficacy were directly influeced by level of education, perceived health status, life-style, which explained 57%. Depression were directly influeced by past exercise behavior, BMI, life-style, which explained 27%. Family support were directly influeced by life-style, perceived health status, which explained 29%. Fatigue were directly influeced by BMI, life-style, perceived health status. which explained 41%. Duration of arthritis were directly influeced by life-style, past exercise behavior, BMI, which explained 6%. In conclusion, important variables for physical fitness were life-style, and variable affecting exercise participation were life-style. Perceived self-efficacy of exercise was a significant predictor of exercise score. BMI, Life-style, perceived benefits of action, family support, past exercise behavior showed direct effects on perceived self-efficacy. Therefore, disease related factor should be minimized for physical performance and well being in nursing intervention for patients with rheumatoid arthritis, and plans to promote and continue exercise should be seeked to reduce disability. In addition, Exercise program should be planned and performed by the exact evaluation of exercise according to the ability of the patients and the contents to improve the importance of exercise and self efficacy in self control program, dedicated educational program should be involved. This study suggest that the methods to reduce the disease related factors, the importance of daily life-style, recognition of benefit of exercise, and educational program to promote self efficacy should be considered in the exercise behavior promotion and nursing intervention for continous performance. The significance of this study is also thought to provide patients with chronic arthritis the specific data for maximal physical and mental well being through exercise, chronic therapeutic procedure, daily adaptation and confrontation in nursing intervention.