• International Journal of High-Rise Buildings
• /
• v.6 no.3
• /
• pp.227-235
• /
• 2017

This paper describes some of the challenges for structural design of a mid-story seismic isolated high-rise building, which is located near Tokyo station, completed in 2015. The building is a mixed-use complex and encompasses three volumes: one substructure including basement and lower floors, and a pair of seismic isolated superstructures on the substructure. One is a 136.5m high Main Tower (office use), and the other is a 98.5 m high South Tower (hotel use). The seismic isolation systems are arranged in the $3^{rd}$ floor of the Main Tower and $5^{th}$ floor of the South Tower, so that we call this isolation system as the mid-story seismic isolation. The primary goal of the structural design of this building was to secure high seismic safety against the largest earthquake expected in Tokyo. We adopted optimal seismic isolation equipment simulated by dynamic analysis to minimize building damage. On the other hand, wind-induced vibration of a seismic isolated high-rise building tends to be excited. To reduce the vibration, the following strategies were adopted respectively. In the Main Tower with a large wind receiving area, we adopted a mechanism that locks oil dampers at the isolation level during strong wind. In the South Tower, two tuned mass dampers (TMDs) are installed at the top of the building to control the vibration. In addition, our paper will also report the building performance evaluated for wind and seismic observation after completion of the building. In 2016, an earthquake of seismic intensity 3 (JMA scale) occurred twice in Tokyo. The acceleration reduction rate of the seismic isolation level due to these earthquakes was approximately 30 to 60%. These are also verified by dynamic analysis using observed acceleration data. Also, in April 2016, a strong wind exceeding the speed of 25m/s occurred in Tokyo. On the basis of the record at the strong wind, we confirmed that the locking mechanism of oil damper worked as designed.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.29-41
• /
• 1998

Despite orthodontic treatment(tooth moving) is dynamic act many orthodontists have used mainly static evaluation method for evaluating effectiveness of the orthodontic appliances. They want to find which is better appliance, especially in the treatment results and treatment period when they chose one appliance from sugessted appliances for obtaining same treatment goal. The author and colleagues invented and manufactured new machine for getting information about the relative effectiveness from many suggested orthodontic appliances and we named it Calorific machine. We used this Calorinc machine to find the relative differences about tooth moving mechanism and tooth moving time between the Burstone's PLA(single force mechanism) and Molar-up's PLA(couple mechanism) for correcting the posterior cross bite. We measured the distance of tooth moving on the occlusal X-ray film and recorded the moving time of the anchored(control elctro-thermal tooth) and lingually tipped lower second molars(experimental electro-thermal tooth) and then processed paired t-est by SAS program. The results were as follows. 1. Molar-up's PLA showed more extrusive and horizontal movement than Burstone's PLA at the lingually tipped molar(p=0.0000). 2. There is no finding of tooth movement by Molar-up's PLA at the uprighted molar(p=o.3475) but Burstone's PLA showed a little change(0.2 m) at the same molar(p=0.0001). 3. Burstone's PLA took 17.8 minutes for tooth moving but Molar-up's PLA took only 3.8 minutes(p=0.0001)

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.216-221
• /
• 1999

A mental task combined with noise background is an effective model of laboratory stress for study of psychophysiology of the autonomic nervous system (ANS). The intensity of the background noise significantly affects both a subjective evaluation of experienced stress level during test and the physiological responses associated with mental load in noisy environments. Providing tests of similar difficulties we manipulated the background noise intensity as a main factor influencing a psychophysiological outcome and the analyzed reactivity along withe the noise intensity dimension. The goal of this study was to identify the patterns of ANS responses and the relevant subjective stress scores during performance of word recognition tasks on the background of white noise (WN) of the different intensities (55, 70 and 85 dB). Subjects were 27 college students (19-24 years old). BIOPAC, Grass Neurodata System and AcqKnowlwdge 3.5 software were used to record ECG, PPG, SCL, skin temperature, and respiration. Experimental manipulations were effective in producing subjective and physiological responses usually associated with stress. The results suggested that the following potential autonomic mechanisms might be involved in the mediation of the observed physiological responses: A sympathetic activation with parasympathetic withdrawal during mild 55 and 70dB noise (featured by similar profiles) and simultaneous activation of sympathetic and parasympathetic systems during intense 85dB WN. The parasympathetic activation in this case might be a compensatory effect directed to prevent sympathetic domination and to maintain optimal arousal state for the successful performance on mental stress task. It should be mentioned that obtained results partially support Gellhorn's (1960; 1970) "tuning phenomenon" as a possible mechanism underlying stress response.

• Journal of Intelligence and Information Systems
• /
• v.12 no.4
• /
• pp.51-60
• /
• 2006

The goal of qualitative analysis is to capture and formalize qualitative and intuitive knowledge about physical world. Qualitative reasoning has been successfully applied to electric and mechanical mechanism domains, in which most of reasoning has focused on simulation. This paper introduces a qualitative comparative analysis technique which predicts how a change in a given situation propagates. We developed a comparative analysis technique which extends previous research by including a reasoning technique about the relative rate of the change of a parameter. Previous research focuses only on the relative change of a parameter. Causal model for the given situation is generated from qualitative domain model. The propagation by the change in causal relations are traced by applying our comparative analysis. By providing explanation as well as prediction for the given change, our technique is expected to be used in design, diagnosis, intelligent tutoring system, environmental evaluation.

• Smart Media Journal
• /
• v.13 no.10
• /
• pp.50-58
• /
• 2024

As environmental pollution, energy depletion, and maintenance difficulties due to changes in social requirements arise during project progress, interest in the sustainability of project management has increased. Accordingly, sustainable project management theories have been proposed to complement the short-term goal-focused approach and performance evaluation methods that existing project management methods have adhered to. However, the sustainable project management theories have not been extended to empirical research. In this paper, we provides a case study of a sustainable project management framework and control mechanisms such as a collaboration model and incentive model using a road flood prevention project as an example. The case project was a project for improving urban infrastructure and was carried out with consideration for environmental, social, and economic sustainability. Through sustainable project management, the case project was able to achieve its sustainability goals and shows the results of the application of the control mechanisms.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.203-209
• /
• 2016

Purpose: Stimulating the proliferation and migration of periodontal ligament cells (PDLCs) has become the main goal of periodontal regeneration. To accomplish this goal, regeneration procedures have been developed, but results have not been predictable. Recently, tissue engineering using enamel matrix derivatives (EMDs) and growth factors has been applied to periodontal regeneration; however, the mechanism of EMDs is largely unknown. The aim of this study was to investigate the effects of EMDs on the proliferation and release of growth factors from PDLCs. Materials and methods: Human PDLCs were removed from individually extracted 3rd molars of healthy young adults, and cultured in the media containing EMDs (Emdogain, Biora, Malmo, Sweden) at concentration of 0, 12.5, 25, 50, 100, and $200{\mu}g/mL$ each. Cell proliferation and ALP (alkaline phosphatase) activity were measured. The evaluation of growth factors released by PDLCs was also performed by one-way analysis of variance (ANOVA) and Bonferroni's multiple comparison test. Results: Significantly increased proliferation and ALP activity were observed in PDLCs treated with over $25{\mu}g/mL$ and $50{\mu}g/mL$ EMDs, respectively. Additionally, treatment of PDLCs with $50{\mu}g/mL$ resulted in significantly increased release of vascular endothelial growth factor (VEGF) and transforming growth factor $(TGF)-{\beta}$ after 24 h and 48 h, respectively. Conclusion: EMDs enhance the proliferation and ALP activity of PDLCs, and promote the release of growth factors, including VEGF and $TGF-{\beta}$, from PDLCs. Therefore EMDs could be one of the effective methods for periodontal regeneration.

• KIPS Transactions on Software and Data Engineering
• /
• v.11 no.8
• /
• pp.331-338
• /
• 2022

Successor representation (SR) is a model of human reinforcement learning (RL) mimicking the underlying mechanism of hippocampal cells constructing cognitive maps. SR utilizes these learned features to adaptively respond to the frequent reward changes. In this paper, we evaluated the performance of SR under the context where changes in latent variables of environments trigger the reward structure changes. For a benchmark test, we adopted SR-Dyna, an integration of SR into goal-driven Dyna RL algorithm in the 2-stage Markov Decision Task (MDT) in which we can intentionally manipulate the latent variables - state transition uncertainty and goal-condition. To precisely investigate the characteristics of SR, we conducted the experiments while controlling each latent variable that affects the changes in reward structure. Evaluation results showed that SR-Dyna could learn to respond to the reward changes in relation to the changes in latent variables, but could not learn rapidly in that situation. This brings about the necessity to build more robust RL models that can rapidly learn to respond to the frequent changes in the environment in which latent variables and reward structure change at the same time.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.7
• /
• pp.137-148
• /
• 2011

Different from the traditional client-server model, it is possible for participants in a cooperative distributed system to get quality services regardless of the number of participants in the system since they voluntarily pool or share their resources in order to achieve their common goal. However, some selfish participants try to avoid providing their resources while still enjoying the benefits offered by the system, which is termed free-riding. The results of free-riding in cooperative distributed systems lead to system collapse because the system capacity (per participant) decreases as the number of free-riders increases, widely known as the tragedy of commons. As a consequence, designing an efficient incentive mechanism to prevent free-riding is mandatory for a successful cooperative distributed system. Because of the importance of incentive mechanisms in cooperative distributed system, a myriad of incentives mechanisms have been proposed without a standard for performance evaluation. This paper draws general incentive design considerations which can be used as performance metrics through an extensive survey on this literature, providing future researchers with guidelines for the effective incentive design in cooperative distributed systems.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1035-1042
• /
• 2005

Granular Activated Carbon(GAC) is widely used in drinking water treatment. At S and B Water Treatment Plant, GAC is used in place of granular media in conventional rapid filters(GAC Filter-Adsorber) for removal of Disinfection By-products(DBPs). The primary focus of this study is on the performance of existing filter-adsorber, and their operation. It was found that F/A process removed turbidity as effective as sand system. The ratio of Hydrophobic DOM (HPO) and hydrophilic DOM (HPI) fraction in the raw water at S and B WTP was similar. Filter Adsorber presented earlier DOC breakthrough and steady state condition which was contributed by biodegradation during operation period. The removal efficiency of DBPs were used to evaluate the filter performance. The DBPs concentration of F/A treated water was below treatment goal level (THM < $80\;{\mu}g/L$, HAA < $60{\mu}g/L$). The removal efficiency of THM decreased rapidly during operation period. However, HAA were removed steadily regardless of the influent concentration of HAA. These results indicate that the removal of THM depend upon the adsorption mechanism while the removal of HAA depend upon biodegradation as well as adsorption. The decrease of adsorption capacity and characteristic value of GAC may be attributed to the effect of high organic loading, residual free chlorine, coagulants, manganese oxidants and frequently backwashing. This study has confirmed that Filter adsorber process can be considered as effective alternatives for the removal of DBPs, especially HAA.

• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.246-257
• /
• 2009

Regarding climate change, the most significant challenge the world faces is achieving the goal of stabilizing the global concentration of greenhouse gases. However, this cannot be accomplished by greenhouse gas reduction efforts of developed countries alone. In this context, a "sectoral approach" has been brought up as a way to overcome the limit of the Kyoto Protocol and induce the participation of developing countries. This paper focuses on the different types of sectoral approaches that have been suggested so far, and their criteria, scope and effectiveness. It therefore explores the potential each approach has as a policy alternative under the post-2012 scheme. On top of that, with the possibility of these sectoral approaches becoming strong future policy alternatives in mind, this paper also analyzes their applicability to the Korean industry. For the steel, petrochemical and oil industries - in which energy efficiency exceeds the world average- a technology-based approach is proposed as an alternative. For the cement, paper and power generation industries - in which energy efficiency is about the same as the global average - a sectoral crediting mechanism or an index-based approach or a sector-wide transnational approach are proposed as alternatives. Lastly, this paper suggests a future research direction for their adoption and implementation.