• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.10
• /
• pp.1-11
• /
• 1998

This paper presents a new implementation method of the pulsed NMR(nuclear magnetic resonance) apparatus, which contains a single coil in a magnet console, to detect a NMR signal. Applying an RF magnetic field of 5MHz to the magnet console which is designed to have Larmor frequency of 5MHz for hydrogen atom, the hydrogen NMR signal was obtained from the glycerin which was put in the magnet console as a sample. The DC magnetic field in the magnet console was implemented with a permanent magnet of 1168 gauss and the RF magnetic field was generated appling an RF signal with the frequency of 5MHz and the current magnitude of 8A to a coil of 5.73${\mu}$H. The magnitude of the NMR signal was maximum when the RF magnetic field was generated for 2.8 ${\mu}$sec, and the period of generating the RF magnetic field was designed to 100msec for detecting the NMR signal repeatedly. The NMR signal, radiated from the sample in the magnetic console, was appeared as an amplitude-modulated signal with a frequency equal to the Larmor frequency. The signal, induced in the coil, was amplified in the tx/rx separation circuit, preamplifier and intermediate amplifier by a factor of 20.7dB, 36dB and 40dB, respectively, and the signal was detected by a synchronous detection circuits, then the NMR signal was obtained.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.69-73
• /
• 2014

In this study, polysaccharide-poly(vinyl alcohol) (PVA) hydrogels were prepared by using ${\gamma}$-ray and evaluated for potential application as an anti-inflammation patch. Ulmus davidiana var. japonica (UD), one of polysaccharides has been particularly used as an oriental remedy for the treatment of inflammation and ulcers. PVA as a biocompatible polymer and glycerin as a moisturizer were blended with the UD, and its hydrogels were prepared by radiation crosslinking. Characterizations for UD hydrogels were performed by using cytotoxicity assay, antioxidant activity test, and physicochemical test such as gel fraction ratio, and swelling behavior. The results showed that these UD hydrogels had excellent physical properties, anti-inflammation activity, and non-cytotoxicity on the cells. Therefore, these polysaccharide based-UD hydrogels can be effectively used as an inflammation patch.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.754-759
• /
• 2008

The effect of citric acid-aqueous chlorine dioxide ($ClO_2$) treatment of radish seeds artificially contaminated with Salmonella typhimurium was studied. Radish seeds were inoculated by immersion, in more than 106 log CFU/g seed, of a suspension of S. typhimurium, dried, and stored sealed at $4^{\circ}C$ Radish seeds soaked in 200 ppm aqueous ClO2 solution for 10 min showed a bacterial reduction of 1.08 log CFU/g seed, and the lowering of microbial burden noted in seeds soaked in 2% (w/v) citric acid solution for 10 min was 2.89 log CFU/g seed. Next, radish seeds were exposed to 0.5% (v/v) glycerol solution for 10 min either before or after treatment with 200 ppm aqueous ClO2 or 2% (w/v) citric acid for 10 min. Glycerol exposure after citric acid treatment reduced bacteria by 3.46 log CFU/g seed, and glycerol treatment after aqueous $ClO_2$ treatment reduced the microbial burden by 2.14 log CFU/g seed. Both glycerol treatments yielded better elimination of S. typhimurium than did a single treatment with either citric acid or aqueous $ClO_2$. Radish seeds inoculated with S. typhimurium were treated throughout the entire growth period. Although radish seed treatment was effective, treatment by citric acid and aqueous $ClO_2$ after sprouting was not effective to eliminate S. typhimurium.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.464-476
• /
• 2021

Various materials, depending on the personality of the artist, are required for contemporary art. Thus, it is necessary to decipher the expressive intentions of the artist and characteristics of the materials required for the conservation of such art. The purpose of this study is to analyze the causes underlying the deterioration of sculptures made from soap and to determine the ideal hygrothermal environment required to stably exhibit and store these artworks. Furthermore, we aim to maintain the long-term structures of the artworks in accordance with the changing expressions and intentions of the artist. Our analysis confirmed that the extracts of the soap sculptures were composed of glycerin and that the sculptures were sensitive to humidity. Moreover, we determined that a relative humidity (RH.) of approximately 60~65% made for an appropriate hygrothermal environment required to preserve the sculptures. We also preserved each work in various ways by applying appropriate preservation treatment, and found that the optimum preservation environment for soap sculptures was a temperature of 20±2℃ and a RH. of 60±5%.

• Journal of Biomedical Engineering Research
• /
• v.43 no.3
• /
• pp.136-146
• /
• 2022

In this study, it is intended to provide basic data that can help develop a cardiovascular simulator for performance evaluation of pulse wave detectors by identifying the development status of domestic and overseas cardiovascular simulators. A total of 119 papers were selected by excluding duplicate literature, gray literature, and literature not related to a cardiovascular simulator. Based on the selected literature, the research trend of cardiovascular simulators was analyzed. As a result of analyzing the purpose of the study, most of the simulators were developed to evaluate the hemodynamic properties of artificial hearts and valves. In addition, it was used for simulation evaluation or hemodynamic studies such as pulse wave studies. As a result of analyzing configurations of the simulators, a heart most often consisted of only one left ventricle. For blood vessels, the Windkessel model was most often constructed using chambers and valves. In most studies, blood was reproduced by mixing glycerin and water to reproduce both density and viscosity. In addition, as a result of analysis from the perspective of medical device performance evaluation, simulators for evaluating artificial heart and artificial valves have been studied a lot, whereas simulators for blood pressure, pulse wave, and blood flow devices have been relatively insignificant. Based on the review results, we suggested considerations when developing a simulator for performance evaluations of a pulse wave detector.

• Korean Journal of Radiology
• /
• v.21 no.4
• /
• pp.422-430
• /
• 2020

The Korean Society of Urogenital Radiology (KSUR) aimed to present a consensus statement for patient preparation, standard technique, and pain management in relation to transrectal ultrasound-guided prostate biopsy (TRUS-Bx) to reduce the variability in TRUS-Bx methodologies and suggest a nationwide guideline. The KSUR guideline development subcommittee constructed questionnaires assessing prebiopsy anticoagulation, the cleansing enema, antimicrobial prophylaxis, local anesthesia methods such as periprostatic neurovascular bundle block (PNB) or intrarectal lidocaine gel application (IRLA), opioid usage, and the number of biopsy cores and length and diameter of the biopsy needle. The survey was conducted using an Internet-based platform, and responses were solicited from the 90 members registered on the KSUR mailing list as of 2018. A comprehensive search of relevant literature from Medline database was conducted. The strength of each recommendation was graded on the basis of the level of evidence. Among the 90 registered members, 29 doctors (32.2%) responded to this online survey. Most KSUR members stopped anticoagulants (100%) and antiplatelets (76%) one week before the procedure. All respondents performed a cleansing enema before TRUS-Bx. Approximately 86% of respondents administered prophylactic antibiotics before TRUS-Bx. The most frequently used antibiotics were third-generation cephalosporins. PNB was the most widely used pain control method, followed by a combination of PNB plus IRLA. Opioids were rarely used (6.8%), and they were used only as an adjunctive pain management approach during TRUS-Bx. The KSUR members mainly chose the 12-core biopsy method (89.7%) and 18G 16-mm or 22-mm (96.5%) needles. The KSUR recommends the 12-core biopsy scheme with PNB with or without IRLA as the standard protocol for TRUS-Bx. Anticoagulants and antiplatelet agents should be discontinued at least 5 days prior to the procedure, and antibiotic prophylaxis is highly recommended to prevent infectious complications. Glycerin cleansing enemas and administration of opioid analogues before the procedure could be helpful in some situations. The choice of biopsy needle is dependent on the practitioners' situation and preferences.

• Journal of Veterinary Science
• /
• v.25 no.2
• /
• pp.29.1-29.11
• /
• 2024

Background: Preservation of biological tissues has been used since ancient times. Regardless of the method employed, tissue preservation is thought to be a vital step in veterinary surgery teaching and learning. Objectives: This study was designed to determine the usability of chemically preserved cadaveric equine heads for surgical teaching in veterinary medicine. Methods: Six cadaveric equine heads were collected immediately after death or euthanasia and frozen until fixation. Fixation was achieved by using a hypertonic solution consisting of sodium chloride, sodium nitrite and sodium nitrate, and an alcoholic solution containing ethanol and glycerin. Chemically preserved specimens were stored at low temperatures (2℃ to 6℃) in a conventional refrigerator. The specimens were submitted to gross and organoleptic assessment right after fixative solution injection (D0) and within 10, 20, and 30 days of fixation (D10, D20, and D30, respectively). Samples of tissue from skin, tongue, oral vestibule, and masseter muscle were collected for histological evaluation at the same time points. Results: Physical and organoleptic assessments revealed excellent specimen quality (mean scores higher than 4 on a 5-point scale) in most cases. In some specimens, lower scores (3) were assigned to the range of mouth opening, particularly on D0 and D10. A reduced the range of mouth opening may be a limiting factor in teaching activities involving structures located in the oral cavity. Conclusions: The excellent physical, histologic, and organoleptic characteristics of the specimens in this sample support their usability in teaching within the time frame considered. Appropriate physical and organoleptic characteristics (color, texture, odor, and flexibility) of the specimens in this study support the use of the method described for preparation of reusable anatomical specimens.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.365-376
• /
• 2006

The purpose of this study was to evaluate the efficacy of blocking the oxygen in the air during the polymerization of sealant. All curing were performed with various light curing units under the application of oxygen gel barrier, stream of nitrogen and carbon dioxide gas for inhibition of oxygen diffusion into sealant surface. The results of present study can be summarized as follows : 1. The amount of eluted TEGDMA form the specimens cured with all the three different light units in the stream of $N_2$ and $CO_2$ gas and application of Oxygen gel barrier($DeOx^{(R)}$) were significantly lower than in the room-air atmosphere (Control) (p<0.05). 2. In the $DeOx^{(R)}$ application, the amount of eluted TEGDMA the specimen cured with PAC light for 10seconds was less than that cured in the stream of $N_2$ and $CO_2$ atmospheric conditions (p<0.05) 3. In the LED using 10 or 20sec irradiation times under the stream of $N_2$ and $CO_2$, the eluted TEGDMA showed to be no statistically significant difference (p>0.05). 4. The microhardness from the specimens cured with all the three different light units under each treated conditions were significantly higher than in the room-air atmosphere (p<0.05). 5. The surface treatment by $DeOx^{(R)}$, $N_2$ and $CO_2$ reduces the thickness of oxygen inhibited layer by sp proximately 49% of the untreated control value.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2004

This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.