• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.86-92
• /
• 1999

The nanofiltration (NF) membranes based on poly(vinyl alcohol) (PVA) and sodium alginate (SA) were prespared. Homogeneous PVA/SA blend membranes were prepared by casting a PVA/SA (95/5 in wi%) mixture solution on an acryl plate followed by drying at a room temperature and by cros-slinking with glutaraldehyde (GA) for 20 minutes PVA/SA blend composite membranes were also prepared by coating a PVA/SA (95/5 in wi%) mixture solution on microporous polysulfone(PSF) supports. The PVA/SA active layer of the composite membrane was crosslinked at room temperature by using an membranes were characterized with a scanning electron microscopy (SEM) a fourier transform infrared spectroscopy (FTIR) and permeation tests. The permeation properties of the composite membrane were as follows: 1.3{{{{ {m }^{2 } }}}}/{{{{ {m }^{2 } }}}}day of flux and >95% of rejection at 200 psi for a 1000 ppm PEG600 solution.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.2
• /
• pp.111-116
• /
• 1991

Dextromethorphan HBr (DMP HBr) ion exchange albumin microcapsules were prepared by the interfacial polymerization method. The incorporation of drugs in empty albumin microcapsules was more increased in case of glutaraldehyde (GA) and formaldehyde (FA) than terephthaloyl chloride (TC) as a cross linking agent. The amount of DMP HBr incorporated into empty albumin micorcapsules was augemented with increasing DMP HBr concentration and the amount of empty microcapsules in the incorporation medium. Increasing the salt concentration in the release medium, the release rate and the DMP HBr amount released from microcapsules were increased. The release rates of DMP HBr from microcapsules retarded considerably compared with DMP HBr powder.

• Journal of Chest Surgery
• /
• v.31 no.10
• /
• pp.919-923
• /
• 1998

Background: Calcific degeneration is unavoidable in either homo- or heterografts implanted in the human body. We have developed a calcification-resistant cardiovascular tissue patch using a novel technique of anticalcification. Materials and methods: Fresh bovine pericardium was harvested at the slaughter house and transfered to the laboratory in Hank's solution. After trimming and fixing the pericardium, it was embedded in 4$^{\circ}C$ 0.65% glutaraldehyde for a week and then washed by phosphate-buffered saline(PBS) of pH 7.4. This prepared pericardium was then stored in 2.5% sulphonated polyethyleneoxide(PEO-SO3) solution for 2 days at room temperature and reversed by 4$^{\circ}C$ NaBH4 solution for 16 hours. To evaluate the calcification-resistance of surface modified bovine pericardium with PEO-SO3, either glutaraldehyde- treated(GA group, n=4) or PEO-SO3-treated pericardial patch(PEO-SO3 group, n=4) was implanted into adult mongrel dog to reconstruct the main pulmonary artery and the descending aorta using a partial clamp technique. After 1 month follow-up, the implanted patches were retrieved to evaluate the pathologic findings and the content of calcium and phosphorous. Results: The PEO-SO3 group showed substantially less retraction and significantly less calcium deposition than the GA group in both aortic(7.10$\pm$1.05 vs. 13.81$\pm$2.33 mg/g of dried tissue) and pulmonary positions(1.55$\pm$0.29 vs. 6.72$\pm$0.70 mg/g)(p<0.01). Phosphorous contents were also less in the PEO-SO3 group than the GA group significantly, 8.11$\pm$1.07 mg/g vs. 19.33$\pm$4.31 mg/g in the aortic and 2.58$\pm$0.40 vs. 12.60$\pm$3.40 mg/g in thepulmonary position(p<0.01). Conclusions: These findings suggest that PEO-SO3 modified bovine pericardium is highly calcification-resistant but further study is needed to evaluate the long-term biological safety and compatibility of the prosthesis.

• Membrane Journal
• /
• v.28 no.2
• /
• pp.96-104
• /
• 2018

With the rapid increase in seawater desalination, the importance of boron rejection is rising. This study was conducted to investigate the effect of hydrophilic compounds on surface modification to maximize water flux and increase boron rejection. First, polyamide active layer was fabricated by interfacial polymerization of polysulfone ultrafiltration membrane with M-phenylenediamine (MPD) and trimesoyl chloride (TMC) to obtain Control polyamide membrane. Next, D-gluconic acid (DGCA) and D-gluconic acid sodium salt (DGCA-Na) were synthesized with glutaraldehyde (GA) and hydrochloric acid (HCl) by modifying the surface of Control polyamide membrane. XPS analysis was carried out for the surface analysis of the synthesized membrane, and it was confirmed that the reaction of surface with DGCA and DGCA-Na compounds was performed. Also, FE-SEM and AFM analysis were performed for morphology measurement, and polyamide active layer formation and surface roughness were confirmed. In the case of water flux, the membrane fabricated by the surface modification had a value of 10 GFD or less. However, the boron rejection of the membranes synthesized with DGCA and DGCA-Na compounds were 94.38% and 94.64%, respectively, which were 12.03 %p and 12.29 %p larger than the Control polyamide membrane, respectively.

• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.989-997
• /
• 1999

Background: Calcific degeneration is the major cause of clinical failure of glutaraldehyde (GA) crosslinked bioprosthetic tissues implanted in the body and necessitates the reoperation or causes death. Surface modification of biologic tissues using sulfonated polyethyleneoixde (PEO-SO3) has been suggested to significantly enhance blood compatibility, biostability and calcification-resistance by means of the synergistic effect of highly mobile and hydrophilic PEO chains and electrical repulsion of negatively charged sulfonate groups. This study was designed to evaluate the anticalcification effect of surface-modification of biologic arteries by direct coupling of PEO-SO3 after GA fixation and changes of calcification according to the implantation period through the quantitative investigation of the deposited calcium and phosphorous contents of the biologic arterial tissues in the canine circulatory implantation model. Material and Method: Total of 16 fresh canine carotid arteries were harvested from eight adult dogs and divided in to GA group(n =8) and PEO-SO3 group(n=8). Sulfonation of diamino-terminated PEO was performed using propane sultone. Canine carotid arteries were only crosslinked with 0.65% GA solution in GA group and modified by direct coupling 5% PEO-SO3 solution after GA crosslinkage for 2 days and stabilized by NaBH4 solution for 16 hours in PEO-SO3 group. In both groups the resected segment of bilateral carotid arteries were reconstructed. Reconstructed segments of the two groups were analysed the quantities of calcium and phosphorous contents after 3(n=4) and 6(n=4) weeks in vivo. Result: After implantation of 3 seeks, PEO-SO3 group showed significantly less depositions.

• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1023-1030
• /
• 1998

Background: Calcific degeneration limits durabilities of the bioprosthetic tissues implanted in the human body. The direct coupling sulphonated polyethyleneoxide(PEO-SO3) to the bioprosthetic tissues after glutaraldehyde(GA) fixation and the removal of residual aldehyde groups from the tissues can augment the effect of calcification-resistance. Materials and methods: To study the anti-calcification effect by PEO-SO3 modification and the removal of the residual aldehyde groups of tissues, surface modified bovine pericardia(BP-PEO-SO3) were preserved in aseptic saline to wash out GA(saline group) and 0.65% GA solution(GA group). And then above two groups and PERIGUARD (Bio-vascular. Co.) (product group) were evaluated with respects to calcium contents and microscopic findings using in vivo implantation models at carotid and femoral artery and peritoneum of 8 adult dogs. Results: In the tissues retrieved from carotid artery, calcium content was significantly decreased in saline group than in other two groups(saline; 2.89±0.31 vs. GA; 6.14±1.08 vs. product; 22.82±5.00 mg/g of dried tissue; p<0.05). In the tissues retrieved from femoral artery and peritoneum, calcium amount was also decreased in saline group than in other two groups, but not reached the significant difference between groups. On the other hand, the pathologic findings of pericardial tissues showed marked destructuction in GA group compared to the other two groups. Conclusions: In this study, covalently PEO-SO3 bound to bovine pericardium decreased calcifications and the anti-calcification effect of BP-PEO-SO3 could be augmented by the washing out the residual aldehyde groups using saline after GA fixation. Conclusively, the PEO-SO3 modified bovine pericardium is highly resistant to calcification and can be useful for the development of calcification-resistant cardiovascular patches and valves.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.783-790
• /
• 2007

The immobilization of proteins and their molecular interactions on various polymer-modified glass substrates [i.e. 3-aminopropyltriethoxysilane (APTS), 3-glycidoxypropyltrimethoxysilane (GPTS), poly (ethylene glycol) diacrylate (PEG-DA), chitosan (CHI), glutaraldehyde (GA), 3-(trichlorosilyl)propyl methacrylate (TPM), 3'-mercaptopropyltrimethoxysilane (MPTMS), glycidyl methacrylate (GMA) and poly-l-lysine (PL).] for potential applications in a nanoarray protein chip at the single-molecule level was evaluated using prismtype dual-color total internal reflection fluorescence microscopy (dual-color TIRFM). A dual-color TIRF microscope, which contained two individual laser beams and a single high-sensitivity camera, was used for the rapid and simultaneous dual-color detection of the interactions and colocalization of different proteins labeled with different fluorescent dyes such as Alexa Fluor® 488, Qdot® 525 and Alexa Fluor® 633. Most of the polymer-modified glass substrates showed good stability and a relative high signal-to-noise (S/N) ratio over a 40-day period after making the substrates. The GPTS/CHI/GA-modified glass substrate showed a 13.5-56.3% higher relative S/N ratio than the other substrates. 1% Top-Block in 10 mM phosphate buffered saline (pH 7.4) showed a 99.2% increase in the blocking effect of non-specific adsorption. These results show that dual-color TIRFM is a powerful methodology for detecting proteins at the single-molecule level with potential applications in nanoarray chips or nano-biosensors.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.253-259
• /
• 2018

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.101-113
• /
• 2016

In this study, to improve the water flux of porous hydrophobic membranes, various water-soluble polymers including neutral, cationic and anionic polymers were adsorbed using 'salting-out' method. The adsorbed hydrophobic membrane surfaces were characterized mainly via the measurements of contact angles and scanning electron microscopy (SEM) images. To enhance the durability of the modified membranes, the water-soluble polymers such poly(vinyl alcohol) (PVA) were crosslinked with glutaraldehyde (GA) and found to be resistant for more than 2 months in vigorously stirred water. The water flux was much more increased when the ionic polymers used as the coating materials rather than the neutral polymer and in this case, about 70% of $0.31L/m^2{\cdot}h$ (LMH) to 0.50 LMH was increased when 300 mg/L of polyacrylamide (PAAm) was used as the coating agents. Among the cationic coating polymers such as poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA), poly(acrylic acid-comaleic acid) (PAM) and poly(acrylic acid) (PAA), PSSA_MA was found to be the best in terms of contact angle and water flux. In the case of PSSA_MA, the water flux was enhanced about 80%. The low concentration of the coating solution was better to hydrophilize while the high concentration inclined to block the pores on the membrane surfaces. The best coating condition was found: (1) coating concentration 150 to 300 mg/L, (2) ionic strength 0.15, (3) coating time 20 min.