• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.86-92
• /
• 1999

The nanofiltration (NF) membranes based on poly(vinyl alcohol) (PVA) and sodium alginate (SA) were prespared. Homogeneous PVA/SA blend membranes were prepared by casting a PVA/SA (95/5 in wi%) mixture solution on an acryl plate followed by drying at a room temperature and by cros-slinking with glutaraldehyde (GA) for 20 minutes PVA/SA blend composite membranes were also prepared by coating a PVA/SA (95/5 in wi%) mixture solution on microporous polysulfone(PSF) supports. The PVA/SA active layer of the composite membrane was crosslinked at room temperature by using an membranes were characterized with a scanning electron microscopy (SEM) a fourier transform infrared spectroscopy (FTIR) and permeation tests. The permeation properties of the composite membrane were as follows: 1.3{{{{ {m }^{2 } }}}}/{{{{ {m }^{2 } }}}}day of flux and >95% of rejection at 200 psi for a 1000 ppm PEG600 solution.

• Journal of Pharmaceutical Investigation
• /
• 제21권2호
• /
• pp.111-116
• /
• 1991

Dextromethorphan HBr (DMP HBr) ion exchange albumin microcapsules were prepared by the interfacial polymerization method. The incorporation of drugs in empty albumin microcapsules was more increased in case of glutaraldehyde (GA) and formaldehyde (FA) than terephthaloyl chloride (TC) as a cross linking agent. The amount of DMP HBr incorporated into empty albumin micorcapsules was augemented with increasing DMP HBr concentration and the amount of empty microcapsules in the incorporation medium. Increasing the salt concentration in the release medium, the release rate and the DMP HBr amount released from microcapsules were increased. The release rates of DMP HBr from microcapsules retarded considerably compared with DMP HBr powder.

• Journal of Chest Surgery
• /
• 제31권10호
• /
• pp.919-923
• /
• 1998

연구배경: 인체에 이식된 동종 혹은 이종조직은 궁극적으로 석회화 변성이 일어난다. 저자들은 독자적인 항석회화 처리법을 이용해 석회화에 내구성을 가진 심혈관용 조직첨포를 개발하였다. 재료 및 방법:도축장에서 채취한 신선한 소의 심막을 Hank 용액에 담아 실험실로 이송하였다. 불필요한 부분을 절제해 낸 심낭조직을 0.65% glutaraldehyde 용액(4$^{\circ}C$)에 1주일 동안 저장한 다음 phophate-buffered saline 용액(pH 7.4)로 세척하였다. 이후 2.5% 술폰산화 폴리에틸렌옥사이드(PEO-SO3) 용액으로 실온에서 2일 동안 처리한 다음 4$^{\circ}C$ NaBH4용액으로 16시간 동안 환원시켰다. 실험은 글루타르알데하이드 용액으로만 처리한 심막첨포와 항석회화 처리된 심막첨포를 각각 대조군(GA군, n=4)과 실험군(PEO-SO3군, n=4)으로 나누어 혈관벽에 이식하여 석회화 변성 정도를 비교하였다. 실험모델은 성견의 폐동맥과 대동맥 벽의 일부를 절제한 후 심막첨포로 재건하는 방법을 이용하였고, 수술 후 평균 1개월 째에 이식된 첨포를 적출하여 조직병리 변화와 칼슘 및 인 함량을 측정하였다. 결과: 실험군이 대조군에 비해 조직 위축 변성, 칼슘(폐동맥; 1.55$\pm$0.29 vs. 6.72$\pm$0.70 mg/g, 대동맥; 7.10$\pm$1.05 vs. 13.81$\pm$2.33 mg/g) 및 인의 침착량 (폐동맥; 2.58$\pm$0.40 vs. 12.60$\pm$3.40 mg/g, 대동맥; 8.11$\pm$1.07 mg/g vs. 19.33$\pm$4.31 mg/g)이 현저하게 적었다 (P<0.01). 결론:이상의 결과에서 PEO-SO$_3$로 처리한 조직첨포는, 비록 단기관찰 결과이지만, 충분한 석회화 내성을 보이며 이 조직첨포의 장기적인 안정성과 적합성에 대해서는 계속적인 연구가 필요할 것이다.

• 멤브레인
• /
• 제28권2호
• /
• pp.96-104
• /
• 2018

해수담수화의 빠른 증가와 함께 붕소 제거에 대한 중요성이 상승하고 있다. 본 연구는 표면개질 시 친수성 화합물을 이용하여 수투과량을 최대한 막고 붕소 제거율을 높이기 위한 연구를 진행하였다. 첫째로, Control polyamide 역삼투막을 얻기 위해 M-phenylenediamine (MPD)와 trimesoyl chloride (TMC)를 Polysulfone 한외여과막에 계면중합을 시켜 polyamide 활성층을 제조하였다. 다음으로, Control polyamide 역삼투막에 표면개질을 진행시켜 D-gluconic acid (DGCA)와 D-gluconic acid sodium salt (DGCA-Na)를 glutaraldehyde (GA)와 hydrochloric acid (HCl)을 이용하여 합성시켰다. 합성된 역삼투막의 표면 분석을 위해 XPS 분석을 진행하였으며, DGCA 및 DGCA-Na 화합물과의 반응이 되었음을 확인하였다. 또한, morphology 측정을 위해 FE-SEM과 AFM 분석을 진행하였으며, polyamide 활성층 형성 및 표면 거칠기를 확인할 수 있었다. 수투과량의 경우, 표면개질을 진행한 역삼투막은 10 GFD 수준이거나 그 이하의 값을 가졌다. 하지만, DGCA 및 DGCA-Na 화합물과 표면개질을 진행한 역삼투막의 붕소 제거율은 94.38, 94.64%로, Control polyamide 역삼투막보다 각각 12.03, 12.29 %p만큼 큰 값을 가지는 것을 확인할 수 있었다.

• Journal of Chest Surgery
• /
• 제32권11호
• /
• pp.989-997
• /
• 1999

Background: Calcific degeneration is the major cause of clinical failure of glutaraldehyde (GA) crosslinked bioprosthetic tissues implanted in the body and necessitates the reoperation or causes death. Surface modification of biologic tissues using sulfonated polyethyleneoixde (PEO-SO3) has been suggested to significantly enhance blood compatibility, biostability and calcification-resistance by means of the synergistic effect of highly mobile and hydrophilic PEO chains and electrical repulsion of negatively charged sulfonate groups. This study was designed to evaluate the anticalcification effect of surface-modification of biologic arteries by direct coupling of PEO-SO3 after GA fixation and changes of calcification according to the implantation period through the quantitative investigation of the deposited calcium and phosphorous contents of the biologic arterial tissues in the canine circulatory implantation model. Material and Method: Total of 16 fresh canine carotid arteries were harvested from eight adult dogs and divided in to GA group(n =8) and PEO-SO3 group(n=8). Sulfonation of diamino-terminated PEO was performed using propane sultone. Canine carotid arteries were only crosslinked with 0.65% GA solution in GA group and modified by direct coupling 5% PEO-SO3 solution after GA crosslinkage for 2 days and stabilized by NaBH4 solution for 16 hours in PEO-SO3 group. In both groups the resected segment of bilateral carotid arteries were reconstructed. Reconstructed segments of the two groups were analysed the quantities of calcium and phosphorous contents after 3(n=4) and 6(n=4) weeks in vivo. Result: After implantation of 3 seeks, PEO-SO3 group showed significantly less depositions.

• Journal of Chest Surgery
• /
• 제31권11호
• /
• pp.1023-1030
• /
• 1998

연구배경 : 인체내 이식된 생체조직들은 석회화 변성으로 인해 그 내구성이 단축된다. 이러한 조직들을 이식하기전에 글루타르알데하이드(GA)로 고정후 sulphonated polyethyleneoxide(PEO-SO3)를 결합시키고 또한 조직내 의 잔유 알데히드기를 제거함으로써 석회화에 대한 내구성을 향상시킬 수 있다 재료 및 방법 : PEO-SO3 처리법과 잔유 알데히드기 제거의 석회화 방지 효과를 알아보기 위하여 GA 고정 후 PEO-SO3로 처리한 소 심낭 첨포를 잔유 알데히드기 제거를 위해 무균 생리식염수에 보존한 saline 군과 0.65% GA 용액 에 보존한 GA군, 그리고 이미 상품화되어 임상에서 사용되고 있는 product군을 8마리 개의 경동맥과 대퇴동 맥 및 복막에 이식하여 6주 후 적출하여 칼슘량 및 병리조직 소견에 대해 알아보았다. 결과 : 경동맥에서 채취한 조직첨포의 칼슘량은 saline군에서 GA군과 product군에 비해 유의하게 적었다 (saline; 2.89$\pm$0.31 vs. GA; 6.14$\pm$1.08 vs. product; 22.82$\pm$5.00 mg/g; p< .05). 대퇴동맥과 복막 이식 첨포에서의 칼슘량 또한 saline군에서 다른 두 군에 비해 가장 적었으나 통계적인 유의성은 없었다. 한편 병리조직 검사에서는 GA군에서 다른 두 군에 비해 조직의 석회화로 인한 변성 파괴가 심하였다. 결론 : 본 연구에서 소 심낭 조직 첨포와 결합한 PEO-SO3는 석회화를 감소시키고 또한 조직내 잔유 알데히드기 를 생리식염수로 세척하여 제거함으로써 항석회화 효과를 증가시킬 수 있었다. 결론적으로 PEO-SO3로 처리한 소 심낭 조직은 석회화 변성에 대한 강한 저항성을 보임으로써 심혈관 첨포나 인공 조직 판막 개발 에 도움를 줄 수 있을 것이다.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.783-790
• /
• 2007

The immobilization of proteins and their molecular interactions on various polymer-modified glass substrates [i.e. 3-aminopropyltriethoxysilane (APTS), 3-glycidoxypropyltrimethoxysilane (GPTS), poly (ethylene glycol) diacrylate (PEG-DA), chitosan (CHI), glutaraldehyde (GA), 3-(trichlorosilyl)propyl methacrylate (TPM), 3'-mercaptopropyltrimethoxysilane (MPTMS), glycidyl methacrylate (GMA) and poly-l-lysine (PL).] for potential applications in a nanoarray protein chip at the single-molecule level was evaluated using prismtype dual-color total internal reflection fluorescence microscopy (dual-color TIRFM). A dual-color TIRF microscope, which contained two individual laser beams and a single high-sensitivity camera, was used for the rapid and simultaneous dual-color detection of the interactions and colocalization of different proteins labeled with different fluorescent dyes such as Alexa Fluor® 488, Qdot® 525 and Alexa Fluor® 633. Most of the polymer-modified glass substrates showed good stability and a relative high signal-to-noise (S/N) ratio over a 40-day period after making the substrates. The GPTS/CHI/GA-modified glass substrate showed a 13.5-56.3% higher relative S/N ratio than the other substrates. 1% Top-Block in 10 mM phosphate buffered saline (pH 7.4) showed a 99.2% increase in the blocking effect of non-specific adsorption. These results show that dual-color TIRFM is a powerful methodology for detecting proteins at the single-molecule level with potential applications in nanoarray chips or nano-biosensors.

• 상하수도학회지
• /
• 제32권3호
• /
• pp.253-259
• /
• 2018

Cu(II) can cause health problem for human being and phosphate is a key pollutant induces eutrophication in rivers and ponds. To remove of Cu(II) and phosphate from solution, chitosan as adsorbent was chosen and used as a form of hydrogel bead. Due to the chemical instability of hydrogel chitosan bead (HCB), the crosslinked HCB by glutaraldehyde (GA) was prepared (HCB-G). HCB-G maintained the spherical bead type at 1% HCl without a loss of chitosan. A variety of batch experiment tests were carried out to determine the removal efficiency (%), maximum uptake (Q, mg/g), and reaction rate. In the single presence of Cu(II) or phosphate, the removal efficiency was obtained to 17 and 16%, respectively. However, the removal efficiency of Cu(II) and phosphate was increased to 50~55% at a mixed solution. The maximum uptake (Q) for Cu(II) and phosphate was enhanced from 11.3 to74.4 mg/g and from 3.34 to 36.6 mg/g, respectively. While the reaction rate of Cu(II) and phosphate was almost finished within 24 and 6 h at single solution, it was not changed for Cu(II) but was retarded for phosphate at mixed solution.

• Korean Chemical Engineering Research
• /
• 제60권4호
• /
• pp.588-593
• /
• 2022

본 논문에서는 hemin, 폴리에틸렌이민(PEI) 및 탄소나노튜브(CNT)를 이용하여 제조 CNT/PEI/hemin/PEI 복합재에 가교제인 테레프탈알데하이드(TPA)를 첨가하여 전자전달이 개선된 과산화수소 환원 반응(HPRR) 촉매를 합성하였다. 합성된 촉매(CNT/PEI/hemin/PEI/TPA)를 과산화수소 10 mM 농도에서 HPRR 반응성을 확인한 결과, 0.2 V (vs. Ag/AgCl)에서 0.2813 mA cm^-2의 전류 밀도로 나타났으며, 이는 가교하지 않은 촉매(CNT/PEI/hemin/PEI)와 범용 가교제인 글루타르알데하이드(GA)에 의해 가교된 촉매(CNT/PEI/hemin/PEI/GA)에 비해 각각 2.43 및 1.87배 증가하였다. CNT/PEI/hemin/PEI/TPA의 HPRR 개시전위는 0.544 V로서 CNT/PEI/hemin/PEI와 CNT/PEI/hemin/PEI/GA의 0.511 및 0.471 V에 비하여 원활한 전자전달에 의해 개선되었음을 확인할 수 있었다. 이는 전기화학 임피던스 분광법(EIS)을 이용한 분석 결과에서도 확인되었는데, CNT/PEI/hemin/PEI/GA의 경우, 전자전달을 방해하는 가교제의 도입에 따라 CNT/PEI/hemin/PEI에 비하여 높은 전자전달저항을 나타낸 반면, CNT/PEI/hemin/PEI/TPA는 6.2% 감소하여, 가장 낮은 전자전달저항을 나타냈다. 막이 없는 흐름형 과산화수소 연료전지를 이용한 평가에서도, CNT/PEI/hemin/PEI/TPA를 환원극으로 활용한 전지의 최대 출력 밀도가 36.34±1.41 μWcm^-2로, CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2)와 CNT/PEI/hemin/PEI/GA(25.57±1.32 μWcm^-2) 보다 높게 측정되어, TPA는 전자전달을 개선 성능을 확인할 수 있었다.

• Membrane and Water Treatment
• /
• 제7권2호
• /
• pp.101-113
• /
• 2016

In this study, to improve the water flux of porous hydrophobic membranes, various water-soluble polymers including neutral, cationic and anionic polymers were adsorbed using 'salting-out' method. The adsorbed hydrophobic membrane surfaces were characterized mainly via the measurements of contact angles and scanning electron microscopy (SEM) images. To enhance the durability of the modified membranes, the water-soluble polymers such poly(vinyl alcohol) (PVA) were crosslinked with glutaraldehyde (GA) and found to be resistant for more than 2 months in vigorously stirred water. The water flux was much more increased when the ionic polymers used as the coating materials rather than the neutral polymer and in this case, about 70% of $0.31L/m^2{\cdot}h$ (LMH) to 0.50 LMH was increased when 300 mg/L of polyacrylamide (PAAm) was used as the coating agents. Among the cationic coating polymers such as poly(styrene sulfonic acid-co-maleic acid) (PSSA_MA), poly(acrylic acid-comaleic acid) (PAM) and poly(acrylic acid) (PAA), PSSA_MA was found to be the best in terms of contact angle and water flux. In the case of PSSA_MA, the water flux was enhanced about 80%. The low concentration of the coating solution was better to hydrophilize while the high concentration inclined to block the pores on the membrane surfaces. The best coating condition was found: (1) coating concentration 150 to 300 mg/L, (2) ionic strength 0.15, (3) coating time 20 min.