• Title/Summary/Keyword: global warming situation

Search Result 71, Processing Time 0.02 seconds

A Technology of Context-aware based Building Management for Energy Efficiency (에너지 효율화를 위한 상황인지 기반 건물 관리 기술)

  • Lee, Hyunjeong;Han, Jinsoo;Jeong, Youn-Kwae;Lee, Il-Woo;Lee, Sang Ho
    • Journal of Convergence Society for SMB
    • /
    • v.2 no.1
    • /
    • pp.69-75
    • /
    • 2012
  • As the global warming and climate change cause the various social problems, such as disasters, abnormal temperature and diseases, technologies and studies for energy conservation and efficiency are increased. Energy use in buildings accounted for 22% of national energy use, so energy saving technology is promoted for residence, commercial and public buildings. Existing methods for energy conservation are passive ways, in that they consider heat loss and low-energy equipment. In recent years, active technologies emerge by converging with ICT, which detect and remove the energy waste situation by measuring, monitoring and controlling the energy use. In this paper, we describe technology trends for building energy optimization and investigates issues for active energy savings.

  • PDF

Development of Greenhouse Gas Estimation Method for a Local Government Level Using Traffic Demand Model

  • Maurillo, Pennie Rose Anne R.;Jung, Hyeon-Ji;Lee, Seon-Ha;Ha, Dong-Ik
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.12 no.3
    • /
    • pp.114-128
    • /
    • 2013
  • Greenhouse gas emissions have been an important issue in different countries because of their effects on global warming. The government has to organize greenhouse gas reduction measures suitable to regional characteristics by establishing annual implementation plans and comprehensive policies based on the UNFCCC. The transportation sector is one of the major contributors of air pollution; hence increasing need to estimate current and future traffic emissions precisely. Under these circumstances, a number of emission models have been developed recently. However, current methods of estimation cannot carry out effective analyses because it does not reflect vehicle movement characteristics. This study aims to present a new method for calculating road traffic emissions in Goyang city. A travel demand model is utilized to carry out GHG emission estimates according the traffic data (fleet composition, vehicle kilometers travelled, traffic intensity, road type, emission factors and speed). This study evaluates two approaches to estimate the road traffic emissions in Goyang City: Pollution-Emis and the Handbook of Emission Factors for Road Transport (HBEFA v.3.1) which is representative of the "average speed" and the "traffic situation" model types. The evaluation of results shows that the proposed emission estimation method may be a good practice if vigilant implementation of model inputs is observed.

Application Technique of Spatial Information for Disaster Areas Forecast (재해지역 예측에서의 공간정보의 활용 기법 연구개발)

  • Yeon, sang-ho;Kwon, kee-wook;Min, kwan-sik
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2010.05a
    • /
    • pp.277-280
    • /
    • 2010
  • The prevention of disasters is important to prepare in advance through analysis and an estimate. But for all the efforts of the government to stave off disasters, the damage out of a guerilla localized heavy rain caused the global warming, a landslide and inundation is growing. To prevent these damages, the basic data and system through systematic research and analysis should be set up. But it is true that collecting of the basic data and the system for preventing disasters are either constructing or insufficient so far. In this research, by using topography spatial data including LiDAR data including the aerial photo and digital maps, and etc. the factor of a disaster, the disaster risk element was extracted. Moreover, the disaster region about the disaster generation available region was evaluated in advance using the easy disaster analysis of current situation photo map which made with the grid analysis method and weighted value estimate technique.

  • PDF

Use Situation Analysis of Evergreen Broad-Leaved Trees as Landscape Trees in Kyushu Area, Japan (일본 규슈지역에서의 조경수로서 상록활엽수의 이용실태 분석)

  • Park, Seok-Gon
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.14 no.6
    • /
    • pp.29-39
    • /
    • 2011
  • This study aimed to select evergreen broad-leaved trees (EBT) that can be produced and planted in Korea by analyzing the current use of the trees for landscaping in the Kyushu area of Japan, a warm temperate region. The results revealed the total production of EBT was higher than that of conifers and due to the suitable growth environment of the area and the subsequent high demand for them. The landscape tree production methods in Japan were divided into container nursery and outdoor nursery, and the uses and species of the trees varied depending on the method; a variety of native species were produced in container nursery rather than in outdoor nursery, whereas trees used as ornamental, gardening, and shade plants were produced in outdoor nursery rather than in container nursery. The results also showed that in Fukuoka, a major city in Kyushu that is adjacent to Korea, the planting rate of EBT, used as ornamental, gardening, and shade plants, was higher than that of deciduous broad-leaved trees and conifers. In the city, the planting rate of Cinnamomum camphora was the highest, Elaeocarpus sylvestris var. ellipticus, Ternstroemia gymnanthera, Ilex rotunda, Quercus glauca, Camellia sasanqua, Eurya emarginata, Pittosporum tobira, Raphiolepis indica var. umbellata, Hedera rhombea, Kadsura japonica, Trachelospermum asiaticum var. asiaticum. These species were verified in Kyushu area for their application as landscape trees and are expected to serve as landscape trees in Korea if the planting areas of them are expanded by global warming, urban heat island and regional microclimate.

The Effect of Appeal Type of Advertisement on Consumer's Prosocial Behavior: Focusing on the Moderating Effect of Social Exclusion (메시지 소구유형이 친사회적 행동에 미치는 영향: 사회적 배제의 조절효과를 중심으로)

  • PARK, Eun-Young
    • The Journal of Industrial Distribution & Business
    • /
    • v.10 no.7
    • /
    • pp.49-58
    • /
    • 2019
  • Purpose - Previous studies on the influence of appeal types of advertising messages on pro-social behavior have shown inconsistent results. The purpose of this study is to examine whether the appeal type of advertising affects consumer's prosocial behavior. In particular, the authors investigated whether the social exclusion moderates the relationship between the appeal type of advertising and prosocial behavior. Research design, data and Methodology - To verify the hypothesis, two experimental study were conducted. The experimental study was 2(appeal type : self-benefit vs. other-benefit) by 2(social exclusion : being ignored vs. being rejected) between-subject design. Participants were randomly assigned to one of four conditions. The experiment was conducted using a computer. First, the participants was exposed to the advertising image used in the social campaign, and then responded to questions about social behavior. The participants completed the experiment after further responding to the item for manipulation check and demographic measure. The experiment took about 10 minutes in total. Results - In Study 1, a global warming campaign with participation intention variable, other-benefit ads rather than self-benefit ads drive consumers who feel socially rejected to be more willing and likely to participate, but consumers who feel socially ignored are more likely to participate the campaign in self-benefit ad than other-benefit ad. Study 2 replicates the findings, a child poverty relief campaign with an amount-to-donate variable: consumers who feel explicitly rejected allocate more dollars to the charity in response to other-benefit rather than self-benefit ads, but consumers who being ignored are willing to donate more money. Conclusion - This study has theoretical contribution in that it expands existing theories by explaining the existing inconsistent results of the message appeal influence on pro-social behavior through new control variables. In addition, the results have important managerial implications, suggesting marketers should tailor their marketing message to match the consumer situation.

Multi-Family Housing Block Design Strategy Development by BIM-based Energy Performance Analysis - focusing on the Block Types and the Variations in Stories - (BIM 기반 에너지성능분석을 통한 공동주택의 주동 설계 전략개발 - 주동타입 및 층수 변화를 중심으로 -)

  • Jun, Jae-Hong;Park, hye-Jin;Lee, Kweon-Hyung;Choo, Seoung-Yeon
    • Journal of the Architectural Institute of Korea Planning & Design
    • /
    • v.34 no.2
    • /
    • pp.3-11
    • /
    • 2018
  • Korea has achieved a rapid economic development and with the increase in population and national income and the expansion of social and economic activities, energy consumption has rapidly increased too. Energy consumption per head has constantly increased and currently, power consumption per head is 7.5 times bigger than in 1985. Buildings occupy 25% of total energy consumption and especially, 50% of total energy is consumed for heating and cooling. In this situation, multi-family housing, which has constantly been increased, has an energy saving rate of 1.9%, which is the lowest level and this makes the government's energy policy for sustainable energy system development useless. Besides, energy consumption leads to secondary problems, such as air, water and marine pollution and heat pollution and wastewater/drainage and the increased use of fossil fuel is a fundamental reason for ozone layer destruction and global warming. Therefore, efficient energy consumption plans are required. This study aims to analyze energy performance in each block type of high-rise and diversified multi-family housing that accounts for 60% of all the housing forms, depending on the variations in stories through BIM-based energy simulation. For this study, four representative block types were selected, based on the multi-family floor plan, which is certified for energy performance evaluation and they were applied to the floor plan of a multi-family house that is scheduled to be built. Then BIM modeling was conducted from the fifth story to the 40th story at an intervals of 5 stories and based on the finding, energy characteristics of each block type and energy performance depending on the variations in stories were analyzed. It is considered that this would serve as objective data for block type and block story decision of energy performance-based multi-family housing.

Structural Model Test for Strength Performance Evaluation of Fairlead Chain Stopper Installed on MW Class Floating Type Offshore Wind Turbine (메가와트급 부유식 해상풍력발전기용 페어리드 체인 스토퍼의 강도 성능평가를 위한 구조 모형 시험)

  • Chang-Yong Song
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.26 no.3
    • /
    • pp.421-431
    • /
    • 2023
  • Recently, the destructive power of typhoons is continuously increasing due to the influence of global warming. In a situation where the installation of floating wind turbines is increasing around the world, concerns about the huge loss and collapse of floating offshore wind turbines due to strong typhoons are deepening. Regarding to the safe operation of the floating offshore wind turbine, the development of a new type of disconnectable mooring system is required. A new fairlead chain stopper considered in this study is devised to more easily attach or detach the floating offshore wind turbine with mooring lines comparing to other disconnectable mooring apparatuses. In order to investigate the structural safety of the initial design of fairlead chain stopper that can be applied to MW-class floating type offshore wind turbine, scale-down structural models were produced using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by performing the tensile tests. The finite element analysis of fairlead chain stopper was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the finite element analysis, the structural weak parts on the fairlead chain stopper were reviewed. The structural model tests were performed considering the main load conditions of fairlead chain stopper, and the test results were compared to the finite element analysis. Through the results of this study, it was possible to experimentally verify the structural safety of the initial design of fairlead chain stopper. It is also judged that the study results can be usefully used to improve the structural strength of fairlead chain stopper in a detailed design stage.

Design of Web-GIS based SWG Simulator for Disseminating Integrated Water Information (통합 물정보 제공을 위한 웹 GIS 기반의 SWG 시뮬레이터 설계)

  • Park, Yonggil;Kim, Kyehyun;Lee, Sungjoo;Yoo, Jaehyun
    • Spatial Information Research
    • /
    • v.23 no.1
    • /
    • pp.19-31
    • /
    • 2015
  • Due to the global warming and unstable abnormal climate changes, water resources differences between regions and water shortage are occurring. Therefore, the water resources management is becoming more important for the stable securement of future water supply and demand. Researches on Smart Water Grid (SWG), which is considered as a new method, that can stably secure and maintain the water resources, are actively being conducted but it is still in infancy. Thus, this study aimed to design SWG simulator based on GIS in order to provide integrated water information in web environment. The user's requirements were analyzed for system development and important functions such as SWG current situation checking, future prediction, filtration plant situation checking functions were designed and data expression techniques using GIS and HTML5 were applied to enhance the understanding of the users. Also, when the emergency situations occurred, the solving process of the situations are reproduced to check the solution process using scenario reproduction functions. Use-case, class, sequence diagram, which are a design for real system development and defines the system usage contents of users, were written, and the story board was written to check the final development contents. This study designed a SWG simulator in order to support the water maintenance reacting to climate changes. The development of system is expected to help securing information to deal with emergency situations such as water shortage and help the decision maker to make decision through reproduction of scenario. The major functions were designed for the convenience of water resource manager and producer but new contents for consumers must be developed to enable duplex information transmission.

Agronomic Characteristics of A Promising Line Adaptable to Extremely Early Cultivation (벼 극조기 재배 적응 유망계통의 농업적 특성)

  • Lee, Jong-Hee;Oh, Seong-Hwan;Kim, Sang-Yeol;Cho, Jun-Hyeon;Lee, Ji-Yoon;Yeo, Un-Sang;Song, You-Chun;Choi, Kyoung-Jin;Park, Tae-Seon;Kang, Hang-Won;Lee, Hag-Dong
    • Korean Journal of Breeding Science
    • /
    • v.42 no.4
    • /
    • pp.407-412
    • /
    • 2010
  • Recently, peoples are greatly concerned with global temperature change because global warming can be a potential serious effect on agriculture production such as yield reduction and poor grain quality. On the other hand, it can bring some beneficial effects through twice cultivation of rice in temperate region. In order to overcome this situation, we developed extremely early-maturing rice 'Milyang255' which heading date was similar with 'Jinbuolbyeo'. Based on agronomic characteristics of 'Milyang255', it has very short stature as 65 cm of culm length and slightly lower spikelets number per panicle compared with that of 'Jinbuolbyeo'. However, the grain appearance, palatability and other items were better than those of 'Jinbuolbyeo' in panel test of cooked rice. The milled rice yield of 'Milyang255' is 3.94 MT/ha at the early transplanting. Especially, its grain filling rate was higher and faster than Jinbuolbyeo and the head rice ratio in milled rice was also higher. Thus, 'Milyang255' can efficiently reduce the growth duration of rice cultivation and also be useful material for research on twice cultivation of rice in Korea.

Effects of Elevated $CO_2$ Concentration and Temperature on the Response of Seed Germination, Phenology and Leaf Morphology of Phytolacca insularis(Endemic species) and Phytolacca americana(Alien species) ($CO_2$농도와 온도증가에 따른 한국특산식물 섬자리공과 귀화식물 미국자리공의 발아, 식물계절 및 잎의 형태학적 반응연구)

  • Kim, Hae-Ran;You, Young-Han
    • Korean Journal of Environment and Ecology
    • /
    • v.24 no.1
    • /
    • pp.62-68
    • /
    • 2010
  • This study was conducted to find out how the germination, phenology and leaf morphology of Phytolacca insularis(endemic species of Korea) and P. americana(alien species) react to the global warming situation. Seed and seedlings of two species were sampled and placed under two separate conditions for the experiment. One of the seed and seedlings was treated in the glass house with control(ambient $CO_2$+ambient temperature, (AC-AT), and the other with control(elevated $CO_2$+ elevated temperature, EC-ET), over the period of one year, 2008-2009. The germination rate of two species was fast, and the time of their germination started early, when they were treated at EC-ET than at AC-AT. Furthermore, the germination rate of Phytolacca insularis(endemic species of Korea) was found to be comparatively lower than that of P. americana(alien species). The former showed only vegetative growth whereas the latter showed both vegetative growth and reproductive growth in one year period. The more $CO_2$ degree and temperature increased, phenological responses of two species, including leaf growth, the formation of flower stems, flowering, and fruit maturing, became much faster, and the time of their leaf-yellowing was delayed. The lamina length of P. insularis was not significantly affected by elevated $CO_2$ and temperature. The lamina length of P. americana, on the other hand, became longer at EC-ET than at AC-AT, but the leaf width of both species increased at EC-ET. As for the number of leaves, both species showed no difference. Finally, the ratio of the leaf area of P. insularis was high at AC-AT, but P. americana was high at EC-ET. These results indicate that P. americana, aliens species, reacts more sensitively to global warming than P. insularis, endemic species, does.